| Message ID | 20220903174150.3566935-10-iskren.chernev@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for sm6115,4250 and OnePlus Nord N100 | expand |
On 03/09/2022 19:41, Iskren Chernev wrote: > Add initial support for OnePlus Nord N100, based on SM4250. Currently > working: > - boots > - usb > - buildin flash storage (UFS) > - SD card reader > > Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> > --- > Remaining issues from make dtbs_check: > - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other > DTS I checked is written in this way. Yes, I sent patches for it, already merged, so please rebase on linux-next. https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/ > > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 ++++++++++++++++++ > 2 files changed, 244 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 1d86a33de528..b8c2de2932a6 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > new file mode 100644 > index 000000000000..ea5f626a6749 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > @@ -0,0 +1,243 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "sm4250.dtsi" > + > +/ { > + model = "OnePlus Nord N100"; > + compatible = "oneplus,billie2", "qcom,sm4250"; > + > + /* required for bootloader to select correct board */ > + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; > + qcom,board-id = <0x1000b 0x00>; > + > + aliases { > + }; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + stdout-path = "framebuffer0"; > + > + framebuffer0: framebuffer@9d400000 { > + compatible = "simple-framebuffer"; > + reg = <0 0x5c000000 0 (1600 * 720 * 4)>; > + width = <720>; > + height = <1600>; > + stride = <(720 * 4)>; > + format = "a8r8g8b8"; > + }; > + }; > + > + clocks { > + xo-board { These should be overridden by label, not full node path. > + clock-frequency = <19200000>; > + }; > + > + sleep-clk { > + clock-frequency = <32764>; > + }; > + }; > + > + reserved-memory { > + mtp_mem: memory@cc300000 { > + reg = <0x00 0xcc300000 0x00 0xb00000>; > + no-map; > + }; > + > + param_mem: memory@cc200000 { > + reg = <0x00 0xcc200000 0x00 0x100000>; > + no-map; > + }; > + > + bootloader_log_mem: memory@5fff7000 { > + reg = <0x00 0x5fff7000 0x00 0x8000>; > + no-map; > + }; > + > + ramoops@cbe00000 { > + compatible = "ramoops"; > + reg = <0x0 0xcbe00000 0x0 0x400000>; > + record-size = <0x40000>; > + pmsg-size = <0x200000>; > + console-size = <0x40000>; > + ftrace-size = <0x40000>; > + }; > + }; > +}; > + > +&usb3 { > + status = "okay"; > +}; > + > +&hsusb_phy { > + vdd-supply = <&vreg_l4a>; > + vdda-pll-supply = <&vreg_l12a>; > + vdda-phy-dpdm-supply = <&vreg_l15a>; > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <14 4>; > +}; > + > +&sdhc_2 { > + vmmc-supply = <&vreg_l22a>; > + vqmmc-supply = <&vreg_l5a>; > + > + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; > + > + status = "okay"; > +}; > + > +&ufs_mem_hc { > + vcc-supply = <&vreg_l24a>; > + vcc-max-microamp = <600000>; > + vccq2-supply = <&vreg_l11a>; > + vccq2-max-microamp = <600000>; > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l4a>; > + vdda-pll-supply = <&vreg_l12a>; > + vddp-ref-clk-supply = <&vreg_l18a>; > + status = "okay"; > +}; > + > +&rpm_requests { > + pm6125-regulators { Please rebase and test with Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml Best regards, Krzysztof
On 9/6/22 11:33, Krzysztof Kozlowski wrote: > On 03/09/2022 19:41, Iskren Chernev wrote: >> Add initial support for OnePlus Nord N100, based on SM4250. Currently >> working: >> - boots >> - usb >> - buildin flash storage (UFS) >> - SD card reader >> >> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> >> --- >> Remaining issues from make dtbs_check: >> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other >> DTS I checked is written in this way. > > Yes, I sent patches for it, already merged, so please rebase on linux-next. > > https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/ Great, thanks! >> + >> + clocks { >> + xo-board { > > These should be overridden by label, not full node path. Will do. >> +&rpm_requests { >> + pm6125-regulators { > > Please rebase and test with > Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml I will, I'm just waiting for Konrad to say what to do about the reserved-memory nodes. For some reason mainline doesn't use alloc-ranges (dynamic) regions. On the other hand all of the dynamic ranges are not used ATM, so I can just drop them? > Best regards, > Krzysztof
On 9/6/22 11:33, Krzysztof Kozlowski wrote: > On 03/09/2022 19:41, Iskren Chernev wrote: >> Remaining issues from make dtbs_check: >> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other >> DTS I checked is written in this way. > > Yes, I sent patches for it, already merged, so please rebase on linux-next. > > https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/ > > Please rebase and test with > Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e indirect) regulators are used, so this doesn't fix it for me.
On 08/09/2022 19:52, Iskren Chernev wrote: > > > On 9/6/22 11:33, Krzysztof Kozlowski wrote: >> On 03/09/2022 19:41, Iskren Chernev wrote: >>> Remaining issues from make dtbs_check: >>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other >>> DTS I checked is written in this way. >> >> Yes, I sent patches for it, already merged, so please rebase on linux-next. >> >> https://lore.kernel.org/all/20220828084341.112146-1-krzysztof.kozlowski@linaro.org/ >> >> Please rebase and test with >> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml > > It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e > indirect) regulators are used, so this doesn't fix it for me. Indeed, but I got good news! The SMD/RPM was fixed here: https://lore.kernel.org/all/20220901093243.134288-1-krzysztof.kozlowski@linaro.org/ Although anyway you Cc old addresses here, so you need to rebase on next and use get_maintainers.pl. Bjorn, Can we get the schemas merged? Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1d86a33de528..b8c2de2932a6 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file mode 100644 index 000000000000..ea5f626a6749 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "OnePlus Nord N100"; + compatible = "oneplus,billie2", "qcom,sm4250"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; + qcom,board-id = <0x1000b 0x00>; + + aliases { + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1600 * 720 * 4)>; + width = <720>; + height = <1600>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; + + clocks { + xo-board { + clock-frequency = <19200000>; + }; + + sleep-clk { + clock-frequency = <32764>; + }; + }; + + reserved-memory { + mtp_mem: memory@cc300000 { + reg = <0x00 0xcc300000 0x00 0xb00000>; + no-map; + }; + + param_mem: memory@cc200000 { + reg = <0x00 0xcc200000 0x00 0x100000>; + no-map; + }; + + bootloader_log_mem: memory@5fff7000 { + reg = <0x00 0x5fff7000 0x00 0x8000>; + no-map; + }; + + ramoops@cbe00000 { + compatible = "ramoops"; + reg = <0x0 0xcbe00000 0x0 0x400000>; + record-size = <0x40000>; + pmsg-size = <0x200000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + }; + }; +}; + +&usb3 { + status = "okay"; +}; + +&hsusb_phy { + vdd-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&rpm_requests { + pm6125-regulators { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + }; + }; +};
Add initial support for OnePlus Nord N100, based on SM4250. Currently working: - boots - usb - buildin flash storage (UFS) - SD card reader Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- Remaining issues from make dtbs_check: - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other DTS I checked is written in this way. arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 ++++++++++++++++++ 2 files changed, 244 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts