diff mbox series

[v5,09/12] dt-bindings: display/msm: split dpu-msm8998 into DPU and MDSS parts

Message ID 20220831185830.1798676-10-dmitry.baryshkov@linaro.org
State New
Headers show
Series [v5,01/12] dt-bindings: display/msm: split qcom,mdss bindings | expand

Commit Message

Dmitry Baryshkov Aug. 31, 2022, 6:58 p.m. UTC
In order to make the schema more readable, split dpu-msm8998 into the DPU
and MDSS parts, each one describing just a single device binding.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../bindings/display/msm/dpu-msm8998.yaml     | 161 ++++++------------
 .../bindings/display/msm/mdss-msm8998.yaml    |  76 +++++++++
 2 files changed, 129 insertions(+), 108 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/mdss-msm8998.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
index 1e6b7e15f1c5..a71c49ba289a 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
@@ -9,143 +9,88 @@  title: Qualcomm Display DPU dt properties for MSM8998 target
 maintainers:
   - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
 
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for MSM8998 target.
+description: Device tree bindings for the MSM8998 DPU display controller.
 
 allOf:
-  - $ref: /schemas/display/msm/mdss-common.yaml#
+  - $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
     items:
-      - const: qcom,msm8998-mdss
+      - const: qcom,msm8998-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for regdma register set
+      - description: Address offset and size for vbif register set
+      - description: Address offset and size for non-realtime vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: regdma
+      - const: vbif
+      - const: vbif_nrt
 
   clocks:
     items:
-      - description: Display AHB clock
-      - description: Display AXI clock
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display mem-noc clock
       - description: Display core clock
+      - description: Display vsync clock
 
   clock-names:
     items:
       - const: iface
       - const: bus
+      - const: mnoc
       - const: core
-
-  iommus:
-    maxItems: 1
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-    unevaluatedProperties: false
-
-    allOf:
-      - $ref: /schemas/display/msm/dpu-common.yaml#
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,msm8998-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for regdma register set
-          - description: Address offset and size for vbif register set
-          - description: Address offset and size for non-realtime vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: regdma
-          - const: vbif
-          - const: vbif_nrt
-
-      clocks:
-        items:
-          - description: Display ahb clock
-          - description: Display axi clock
-          - description: Display mem-noc clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: iface
-          - const: bus
-          - const: mnoc
-          - const: core
-          - const: vsync
+      - const: vsync
 
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
-    mdss: display-subsystem@c900000 {
-        compatible = "qcom,msm8998-mdss";
-        reg = <0x0c900000 0x1000>;
-        reg-names = "mdss";
+    display-controller@c901000 {
+        compatible = "qcom,msm8998-dpu";
+        reg = <0x0c901000 0x8f000>,
+              <0x0c9a8e00 0xf0>,
+              <0x0c9b0000 0x2008>,
+              <0x0c9b8000 0x1040>;
+        reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
 
         clocks = <&mmcc MDSS_AHB_CLK>,
                  <&mmcc MDSS_AXI_CLK>,
-                 <&mmcc MDSS_MDP_CLK>;
-        clock-names = "iface", "bus", "core";
-
-        #address-cells = <1>;
-        #interrupt-cells = <1>;
-        #size-cells = <1>;
-
-        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-        interrupt-controller;
-        iommus = <&mmss_smmu 0>;
-
-        power-domains = <&mmcc MDSS_GDSC>;
-        ranges;
-
-        display-controller@c901000 {
-            compatible = "qcom,msm8998-dpu";
-            reg = <0x0c901000 0x8f000>,
-                  <0x0c9a8e00 0xf0>,
-                  <0x0c9b0000 0x2008>,
-                  <0x0c9b8000 0x1040>;
-            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
-
-            clocks = <&mmcc MDSS_AHB_CLK>,
-                     <&mmcc MDSS_AXI_CLK>,
-                     <&mmcc MNOC_AHB_CLK>,
-                     <&mmcc MDSS_MDP_CLK>,
-                     <&mmcc MDSS_VSYNC_CLK>;
-            clock-names = "iface", "bus", "mnoc", "core", "vsync";
-
-            interrupt-parent = <&mdss>;
-            interrupts = <0>;
-            operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmpd MSM8998_VDDMX>;
-
-            ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                port@0 {
-                    reg = <0>;
-                    dpu_intf1_out: endpoint {
-                        remote-endpoint = <&dsi0_in>;
-                    };
+                 <&mmcc MNOC_AHB_CLK>,
+                 <&mmcc MDSS_MDP_CLK>,
+                 <&mmcc MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd MSM8998_VDDMX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
                 };
+            };
 
-                port@1 {
-                    reg = <1>;
-                    dpu_intf2_out: endpoint {
-                        remote-endpoint = <&dsi1_in>;
-                    };
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/mdss-msm8998.yaml
new file mode 100644
index 000000000000..3482468fb2d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdss-msm8998.yaml
@@ -0,0 +1,76 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS dt properties for MSM8998 target
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for MSM8998 target.
+
+allOf:
+  - $ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,msm8998-dpu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+    };
+...