@@ -1160,6 +1160,20 @@ config MFD_RK8XX_I2C
through I2C interface. The device supports multiple sub-devices
including interrupts, RTC, LDO & DCDC regulators, and onkey.
+config MFD_RK8XX_SPI
+ tristate "Rockchip RK806 Power Management Chip"
+ depends on SPI && OF
+ select MFD_CORE
+ select REGMAP_SPI
+ select REGMAP_IRQ
+ select MFD_RK808
+ help
+ If you say yes here you get support for the RK806 Power Management
+ chips.
+ This driver provides common support for accessing the device
+ through SPI interface. The device supports multiple sub-devices
+ including interrupts, LDO & DCDC regulators, and onkey.
+
config MFD_RN5T618
tristate "Ricoh RN5T567/618 PMIC"
depends on I2C
@@ -217,6 +217,7 @@ obj-$(CONFIG_MFD_NTXEC) += ntxec.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_RK808) += rk8xx-core.o
obj-$(CONFIG_MFD_RK8XX_I2C) += rk8xx-i2c.o
+obj-$(CONFIG_MFD_RK8XX_SPI) += rk8xx-spi.o
obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
@@ -39,6 +39,11 @@ static const struct resource rk805_key_resources[] = {
DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL),
};
+static struct resource rk806_pwrkey_resources[] = {
+ DEFINE_RES_IRQ(RK806_IRQ_PWRON_FALL),
+ DEFINE_RES_IRQ(RK806_IRQ_PWRON_RISE),
+};
+
static const struct resource rk817_pwrkey_resources[] = {
DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
@@ -59,6 +64,16 @@ static const struct mfd_cell rk805s[] = {
},
};
+static const struct mfd_cell rk806s[] = {
+ { .name = "rk805-pinctrl", },
+ {
+ .name = "rk805-pwrkey",
+ .num_resources = ARRAY_SIZE(rk806_pwrkey_resources),
+ .resources = &rk806_pwrkey_resources[0],
+ },
+ { .name = "rk808-regulator", },
+};
+
static const struct mfd_cell rk808s[] = {
{ .name = "rk808-clkout", },
{ .name = "rk808-regulator", },
@@ -108,6 +123,12 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
};
+static const struct rk808_reg_data rk806_pre_init_reg[] = {
+ {RK806_GPIO_INT_CONFIG, RK806_INT_POL_MSK, RK806_INT_POL_L},
+ {RK806_SYS_CFG3, RK806_SLAVE_RESTART_FUN_MSK, RK806_SLAVE_RESTART_FUN_EN},
+ {RK806_SYS_OPTION, RK806_SYS_ENB2_2M_MSK, RK806_SYS_ENB2_2M_EN},
+};
+
static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
@@ -258,6 +279,27 @@ static const struct regmap_irq rk805_irqs[] = {
},
};
+static const struct regmap_irq rk806_irqs[] = {
+ /* INT_STS0 IRQs */
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON_FALL, 0, RK806_INT_STS_PWRON_FALL),
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON_RISE, 0, RK806_INT_STS_PWRON_RISE),
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON, 0, RK806_INT_STS_PWRON),
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON_LP, 0, RK806_INT_STS_PWRON_LP),
+ REGMAP_IRQ_REG(RK806_IRQ_HOTDIE, 0, RK806_INT_STS_HOTDIE),
+ REGMAP_IRQ_REG(RK806_IRQ_VDC_RISE, 0, RK806_INT_STS_VDC_RISE),
+ REGMAP_IRQ_REG(RK806_IRQ_VDC_FALL, 0, RK806_INT_STS_VDC_FALL),
+ REGMAP_IRQ_REG(RK806_IRQ_VB_LO, 0, RK806_INT_STS_VB_LO),
+ /* INT_STS1 IRQs */
+ REGMAP_IRQ_REG(RK806_IRQ_REV0, 1, RK806_INT_STS_REV0),
+ REGMAP_IRQ_REG(RK806_IRQ_REV1, 1, RK806_INT_STS_REV1),
+ REGMAP_IRQ_REG(RK806_IRQ_REV2, 1, RK806_INT_STS_REV2),
+ REGMAP_IRQ_REG(RK806_IRQ_CRC_ERROR, 1, RK806_INT_STS_CRC_ERROR),
+ REGMAP_IRQ_REG(RK806_IRQ_SLP3_GPIO, 1, RK806_INT_STS_SLP3_GPIO),
+ REGMAP_IRQ_REG(RK806_IRQ_SLP2_GPIO, 1, RK806_INT_STS_SLP2_GPIO),
+ REGMAP_IRQ_REG(RK806_IRQ_SLP1_GPIO, 1, RK806_INT_STS_SLP1_GPIO),
+ REGMAP_IRQ_REG(RK806_IRQ_WDT, 1, RK806_INT_STS_WDT),
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -408,6 +450,18 @@ static struct regmap_irq_chip rk805_irq_chip = {
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk806_irq_chip = {
+ .name = "rk806",
+ .irqs = rk806_irqs,
+ .num_irqs = ARRAY_SIZE(rk806_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .mask_base = RK806_INT_MSK0,
+ .status_base = RK806_INT_STS0,
+ .ack_base = RK806_INT_STS0,
+ .init_ack_masked = true,
+};
+
static const struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -534,6 +588,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
struct rk808 *rk808;
const struct rk808_reg_data *pre_init_reg;
const struct mfd_cell *cells;
+ bool dual_support = false;
int nr_pre_init_regs;
int nr_cells;
int ret;
@@ -555,6 +610,14 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
break;
+ case RK806_ID:
+ rk808->regmap_irq_chip = &rk806_irq_chip;
+ pre_init_reg = rk806_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk806_pre_init_reg);
+ cells = rk806s;
+ nr_cells = ARRAY_SIZE(rk806s);
+ dual_support = true;
+ break;
case RK808_ID:
rk808->regmap_irq_chip = &rk808_irq_chip;
pre_init_reg = rk808_pre_init_reg;
@@ -588,7 +651,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
- IRQF_ONESHOT, -1,
+ IRQF_ONESHOT | (dual_support ? IRQF_SHARED : 0), -1,
rk808->regmap_irq_chip, &rk808->irq_data);
if (ret)
return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
@@ -603,7 +666,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
pre_init_reg[i].addr);
}
- ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+ ret = devm_mfd_add_devices(dev, dual_support ? PLATFORM_DEVID_AUTO : PLATFORM_DEVID_NONE,
cells, nr_cells, NULL, 0,
regmap_irq_get_domain(rk808->irq_data));
if (ret)
new file mode 100644
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MFD spi driver for Rockchip RK806
+ *
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ * Author: Xu Shengfei <xsf@rock-chips.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+static const struct regmap_range rk806_volatile_ranges[] = {
+ /* regmap_reg_range(RK806_INT_STS0, RK806_GPIO_INT_CONFIG), */
+ regmap_reg_range(RK806_POWER_EN0, RK806_POWER_EN5),
+ regmap_reg_range(0x70, 0x7a),
+};
+
+static const struct regmap_access_table rk806_volatile_table = {
+ .yes_ranges = rk806_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(rk806_volatile_ranges),
+};
+
+static const struct regmap_config rk806_regmap_config_spi = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_table = &rk806_volatile_table,
+};
+
+static int rk806_spi_bus_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ const char *val = ((const char*) data) + 1;
+ char addr;
+ char buffer[4] = { 0 };
+
+ // TODO: support writing multiple values at once
+ if (count != 2) {
+ dev_err(&spi->dev, "regmap write err!\n");
+ return -EINVAL;
+ }
+
+ /* Copy address to read from into first element of SPI buffer. */
+ memcpy(&addr, data, sizeof(char));
+
+ buffer[0] = RK806_CMD_WRITE | (count - 2);
+ buffer[1] = addr;
+ buffer[2] = RK806_REG_H;
+ buffer[3] = val[0];
+
+ return spi_write(spi, &buffer, sizeof(buffer));
+}
+
+static int rk806_spi_bus_read(void *context,
+ const void *reg,
+ size_t reg_size,
+ void *val,
+ size_t val_size)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ char addr;
+ char txbuf[3] = { 0 };
+
+ if (reg_size != sizeof(char) || val_size < 1)
+ return -EINVAL;
+
+ /* Copy address to read from into first element of SPI buffer. */
+ memcpy(&addr, reg, sizeof(char));
+
+ txbuf[0] = RK806_CMD_READ | (val_size - 1);
+ txbuf[1] = addr;
+ txbuf[2] = RK806_REG_H;
+
+ return spi_write_then_read(spi, txbuf, 3, val, val_size);
+}
+
+static const struct regmap_bus rk806_regmap_bus_spi = {
+ .write = rk806_spi_bus_write,
+ .read = rk806_spi_bus_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static int rk8xx_spi_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init(&spi->dev, &rk806_regmap_bus_spi,
+ &spi->dev, &rk806_regmap_config_spi);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&spi->dev, PTR_ERR(regmap),
+ "Failed to initialize register map\n");
+
+ return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap);
+}
+
+static const struct of_device_id rk8xx_spi_of_match[] = {
+ { .compatible = "rockchip,rk806", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rk8xx_spi_of_match);
+
+static const struct spi_device_id rk8xx_spi_id_table[] = {
+ { "rk806", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, rk8xx_spi_id_table);
+
+static struct spi_driver rk8xx_spi_driver = {
+ .driver = {
+ .name = "rk8xx-spi",
+ .of_match_table = rk8xx_spi_of_match,
+ },
+ .probe = rk8xx_spi_probe,
+ .id_table = rk8xx_spi_id_table,
+};
+module_spi_driver(rk8xx_spi_driver);
+
+MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
+MODULE_DESCRIPTION("RK8xx SPI PMIC driver");
+MODULE_LICENSE("GPL v2");
@@ -289,6 +289,414 @@ enum rk805_reg {
#define RK805_INT_ALARM_EN (1 << 3)
#define RK805_INT_TIMER_EN (1 << 2)
+/* RK806 */
+#define RK806_POWER_EN0 0x0
+#define RK806_POWER_EN1 0x1
+#define RK806_POWER_EN2 0x2
+#define RK806_POWER_EN3 0x3
+#define RK806_POWER_EN4 0x4
+#define RK806_POWER_EN5 0x5
+#define RK806_POWER_SLP_EN0 0x6
+#define RK806_POWER_SLP_EN1 0x7
+#define RK806_POWER_SLP_EN2 0x8
+#define RK806_POWER_DISCHRG_EN0 0x9
+#define RK806_POWER_DISCHRG_EN1 0xA
+#define RK806_POWER_DISCHRG_EN2 0xB
+#define RK806_BUCK_FB_CONFIG 0xC
+#define RK806_SLP_LP_CONFIG 0xD
+#define RK806_POWER_FPWM_EN0 0xE
+#define RK806_POWER_FPWM_EN1 0xF
+#define RK806_BUCK1_CONFIG 0x10
+#define RK806_BUCK2_CONFIG 0x11
+#define RK806_BUCK3_CONFIG 0x12
+#define RK806_BUCK4_CONFIG 0x13
+#define RK806_BUCK5_CONFIG 0x14
+#define RK806_BUCK6_CONFIG 0x15
+#define RK806_BUCK7_CONFIG 0x16
+#define RK806_BUCK8_CONFIG 0x17
+#define RK806_BUCK9_CONFIG 0x18
+#define RK806_BUCK10_CONFIG 0x19
+#define RK806_BUCK1_ON_VSEL 0x1A
+#define RK806_BUCK2_ON_VSEL 0x1B
+#define RK806_BUCK3_ON_VSEL 0x1C
+#define RK806_BUCK4_ON_VSEL 0x1D
+#define RK806_BUCK5_ON_VSEL 0x1E
+#define RK806_BUCK6_ON_VSEL 0x1F
+#define RK806_BUCK7_ON_VSEL 0x20
+#define RK806_BUCK8_ON_VSEL 0x21
+#define RK806_BUCK9_ON_VSEL 0x22
+#define RK806_BUCK10_ON_VSEL 0x23
+#define RK806_BUCK1_SLP_VSEL 0x24
+#define RK806_BUCK2_SLP_VSEL 0x25
+#define RK806_BUCK3_SLP_VSEL 0x26
+#define RK806_BUCK4_SLP_VSEL 0x27
+#define RK806_BUCK5_SLP_VSEL 0x28
+#define RK806_BUCK6_SLP_VSEL 0x29
+#define RK806_BUCK7_SLP_VSEL 0x2A
+#define RK806_BUCK8_SLP_VSEL 0x2B
+#define RK806_BUCK9_SLP_VSEL 0x2D
+#define RK806_BUCK10_SLP_VSEL 0x2E
+#define RK806_BUCK_DEBUG1 0x30
+#define RK806_BUCK_DEBUG2 0x31
+#define RK806_BUCK_DEBUG3 0x32
+#define RK806_BUCK_DEBUG4 0x33
+#define RK806_BUCK_DEBUG5 0x34
+#define RK806_BUCK_DEBUG6 0x35
+#define RK806_BUCK_DEBUG7 0x36
+#define RK806_BUCK_DEBUG8 0x37
+#define RK806_BUCK_DEBUG9 0x38
+#define RK806_BUCK_DEBUG10 0x39
+#define RK806_BUCK_DEBUG11 0x3A
+#define RK806_BUCK_DEBUG12 0x3B
+#define RK806_BUCK_DEBUG13 0x3C
+#define RK806_BUCK_DEBUG14 0x3D
+#define RK806_BUCK_DEBUG15 0x3E
+#define RK806_BUCK_DEBUG16 0x3F
+#define RK806_BUCK_DEBUG17 0x40
+#define RK806_BUCK_DEBUG18 0x41
+#define RK806_NLDO_IMAX 0x42
+#define RK806_NLDO1_ON_VSEL 0x43
+#define RK806_NLDO2_ON_VSEL 0x44
+#define RK806_NLDO3_ON_VSEL 0x45
+#define RK806_NLDO4_ON_VSEL 0x46
+#define RK806_NLDO5_ON_VSEL 0x47
+#define RK806_NLDO1_SLP_VSEL 0x48
+#define RK806_NLDO2_SLP_VSEL 0x49
+#define RK806_NLDO3_SLP_VSEL 0x4A
+#define RK806_NLDO4_SLP_VSEL 0x4B
+#define RK806_NLDO5_SLP_VSEL 0x4C
+#define RK806_PLDO_IMAX 0x4D
+#define RK806_PLDO1_ON_VSEL 0x4E
+#define RK806_PLDO2_ON_VSEL 0x4F
+#define RK806_PLDO3_ON_VSEL 0x50
+#define RK806_PLDO4_ON_VSEL 0x51
+#define RK806_PLDO5_ON_VSEL 0x52
+#define RK806_PLDO6_ON_VSEL 0x53
+#define RK806_PLDO1_SLP_VSEL 0x54
+#define RK806_PLDO2_SLP_VSEL 0x55
+#define RK806_PLDO3_SLP_VSEL 0x56
+#define RK806_PLDO4_SLP_VSEL 0x57
+#define RK806_PLDO5_SLP_VSEL 0x58
+#define RK806_PLDO6_SLP_VSEL 0x59
+#define RK806_CHIP_NAME 0x5A
+#define RK806_CHIP_VER 0x5B
+#define RK806_OTP_VER 0x5C
+#define RK806_SYS_STS 0x5D
+#define RK806_SYS_CFG0 0x5E
+#define RK806_SYS_CFG1 0x5F
+#define RK806_SYS_OPTION 0x61
+#define RK806_SLEEP_CONFIG0 0x62
+#define RK806_SLEEP_CONFIG1 0x63
+#define RK806_SLEEP_CTR_SEL0 0x64
+#define RK806_SLEEP_CTR_SEL1 0x65
+#define RK806_SLEEP_CTR_SEL2 0x66
+#define RK806_SLEEP_CTR_SEL3 0x67
+#define RK806_SLEEP_CTR_SEL4 0x68
+#define RK806_SLEEP_CTR_SEL5 0x69
+#define RK806_DVS_CTRL_SEL0 0x6A
+#define RK806_DVS_CTRL_SEL1 0x6B
+#define RK806_DVS_CTRL_SEL2 0x6C
+#define RK806_DVS_CTRL_SEL3 0x6D
+#define RK806_DVS_CTRL_SEL4 0x6E
+#define RK806_DVS_CTRL_SEL5 0x6F
+#define RK806_DVS_START_CTRL 0x70
+#define RK806_SLEEP_GPIO 0x71
+#define RK806_SYS_CFG3 0x72
+#define RK806_ON_SOURCE 0x74
+#define RK806_OFF_SOURCE 0x75
+#define RK806_PWRON_KEY 0x76
+#define RK806_INT_STS0 0x77
+#define RK806_INT_MSK0 0x78
+#define RK806_INT_STS1 0x79
+#define RK806_INT_MSK1 0x7A
+#define RK806_GPIO_INT_CONFIG 0x7B
+#define RK806_DATA_REG0 0x7C
+#define RK806_DATA_REG1 0x7D
+#define RK806_DATA_REG2 0x7E
+#define RK806_DATA_REG3 0x7F
+#define RK806_DATA_REG4 0x80
+#define RK806_DATA_REG5 0x81
+#define RK806_DATA_REG6 0x82
+#define RK806_DATA_REG7 0x83
+#define RK806_DATA_REG8 0x84
+#define RK806_DATA_REG9 0x85
+#define RK806_DATA_REG10 0x86
+#define RK806_DATA_REG11 0x87
+#define RK806_DATA_REG12 0x88
+#define RK806_DATA_REG13 0x89
+#define RK806_DATA_REG14 0x8A
+#define RK806_DATA_REG15 0x8B
+#define RK806_TM_REG 0x8C
+#define RK806_OTP_EN_REG 0x8D
+#define RK806_FUNC_OTP_EN_REG 0x8E
+#define RK806_TEST_REG1 0x8F
+#define RK806_TEST_REG2 0x90
+#define RK806_TEST_REG3 0x91
+#define RK806_TEST_REG4 0x92
+#define RK806_TEST_REG5 0x93
+#define RK806_BUCK_VSEL_OTP_REG0 0x94
+#define RK806_BUCK_VSEL_OTP_REG1 0x95
+#define RK806_BUCK_VSEL_OTP_REG2 0x96
+#define RK806_BUCK_VSEL_OTP_REG3 0x97
+#define RK806_BUCK_VSEL_OTP_REG4 0x98
+#define RK806_BUCK_VSEL_OTP_REG5 0x99
+#define RK806_BUCK_VSEL_OTP_REG6 0x9A
+#define RK806_BUCK_VSEL_OTP_REG7 0x9B
+#define RK806_BUCK_VSEL_OTP_REG8 0x9C
+#define RK806_BUCK_VSEL_OTP_REG9 0x9D
+#define RK806_NLDO1_VSEL_OTP_REG0 0x9E
+#define RK806_NLDO1_VSEL_OTP_REG1 0x9F
+#define RK806_NLDO1_VSEL_OTP_REG2 0xA0
+#define RK806_NLDO1_VSEL_OTP_REG3 0xA1
+#define RK806_NLDO1_VSEL_OTP_REG4 0xA2
+#define RK806_PLDO_VSEL_OTP_REG0 0xA3
+#define RK806_PLDO_VSEL_OTP_REG1 0xA4
+#define RK806_PLDO_VSEL_OTP_REG2 0xA5
+#define RK806_PLDO_VSEL_OTP_REG3 0xA6
+#define RK806_PLDO_VSEL_OTP_REG4 0xA7
+#define RK806_PLDO_VSEL_OTP_REG5 0xA8
+#define RK806_BUCK_EN_OTP_REG1 0xA9
+#define RK806_NLDO_EN_OTP_REG1 0xAA
+#define RK806_PLDO_EN_OTP_REG1 0xAB
+#define RK806_BUCK_FB_RES_OTP_REG1 0xAC
+#define RK806_OTP_RESEV_REG0 0xAD
+#define RK806_OTP_RESEV_REG1 0xAE
+#define RK806_OTP_RESEV_REG2 0xAF
+#define RK806_OTP_RESEV_REG3 0xB0
+#define RK806_OTP_RESEV_REG4 0xB1
+#define RK806_BUCK_SEQ_REG0 0xB2
+#define RK806_BUCK_SEQ_REG1 0xB3
+#define RK806_BUCK_SEQ_REG2 0xB4
+#define RK806_BUCK_SEQ_REG3 0xB5
+#define RK806_BUCK_SEQ_REG4 0xB6
+#define RK806_BUCK_SEQ_REG5 0xB7
+#define RK806_BUCK_SEQ_REG6 0xB8
+#define RK806_BUCK_SEQ_REG7 0xB9
+#define RK806_BUCK_SEQ_REG8 0xBA
+#define RK806_BUCK_SEQ_REG9 0xBB
+#define RK806_BUCK_SEQ_REG10 0xBC
+#define RK806_BUCK_SEQ_REG11 0xBD
+#define RK806_BUCK_SEQ_REG12 0xBE
+#define RK806_BUCK_SEQ_REG13 0xBF
+#define RK806_BUCK_SEQ_REG14 0xC0
+#define RK806_BUCK_SEQ_REG15 0xC1
+#define RK806_BUCK_SEQ_REG16 0xC2
+#define RK806_BUCK_SEQ_REG17 0xC3
+#define RK806_HK_TRIM_REG1 0xC4
+#define RK806_HK_TRIM_REG2 0xC5
+#define RK806_BUCK_REF_TRIM_REG1 0xC6
+#define RK806_BUCK_REF_TRIM_REG2 0xC7
+#define RK806_BUCK_REF_TRIM_REG3 0xC8
+#define RK806_BUCK_REF_TRIM_REG4 0xC9
+#define RK806_BUCK_REF_TRIM_REG5 0xCA
+#define RK806_BUCK_OSC_TRIM_REG1 0xCB
+#define RK806_BUCK_OSC_TRIM_REG2 0xCC
+#define RK806_BUCK_OSC_TRIM_REG3 0xCD
+#define RK806_BUCK_OSC_TRIM_REG4 0xCE
+#define RK806_BUCK_OSC_TRIM_REG5 0xCF
+#define RK806_BUCK_TRIM_ZCDIOS_REG1 0xD0
+#define RK806_BUCK_TRIM_ZCDIOS_REG2 0xD1
+#define RK806_NLDO_TRIM_REG1 0xD2
+#define RK806_NLDO_TRIM_REG2 0xD3
+#define RK806_NLDO_TRIM_REG3 0xD4
+#define RK806_PLDO_TRIM_REG1 0xD5
+#define RK806_PLDO_TRIM_REG2 0xD6
+#define RK806_PLDO_TRIM_REG3 0xD7
+#define RK806_TRIM_ICOMP_REG1 0xD8
+#define RK806_TRIM_ICOMP_REG2 0xD9
+#define RK806_EFUSE_CONTROL_REGH 0xDA
+#define RK806_FUSE_PROG_REG 0xDB
+#define RK806_MAIN_FSM_STS_REG 0xDD
+#define RK806_FSM_REG 0xDE
+#define RK806_TOP_RESEV_OFFR 0xEC
+#define RK806_TOP_RESEV_POR 0xED
+#define RK806_BUCK_VRSN_REG1 0xEE
+#define RK806_BUCK_VRSN_REG2 0xEF
+#define RK806_NLDO_RLOAD_SEL_REG1 0xF0
+#define RK806_PLDO_RLOAD_SEL_REG1 0xF1
+#define RK806_PLDO_RLOAD_SEL_REG2 0xF2
+#define RK806_BUCK_CMIN_MX_REG1 0xF3
+#define RK806_BUCK_CMIN_MX_REG2 0xF4
+#define RK806_BUCK_FREQ_SET_REG1 0xF5
+#define RK806_BUCK_FREQ_SET_REG2 0xF6
+#define RK806_BUCK_RS_MEABS_REG1 0xF7
+#define RK806_BUCK_RS_MEABS_REG2 0xF8
+#define RK806_BUCK_RS_ZDLEB_REG1 0xF9
+#define RK806_BUCK_RS_ZDLEB_REG2 0xFA
+#define RK806_BUCK_RSERVE_REG1 0xFB
+#define RK806_BUCK_RSERVE_REG2 0xFC
+#define RK806_BUCK_RSERVE_REG3 0xFD
+#define RK806_BUCK_RSERVE_REG4 0xFE
+#define RK806_BUCK_RSERVE_REG5 0xFF
+
+/* INT_STS Register field definitions */
+#define RK806_INT_STS_PWRON_FALL BIT(0)
+#define RK806_INT_STS_PWRON_RISE BIT(1)
+#define RK806_INT_STS_PWRON BIT(2)
+#define RK806_INT_STS_PWRON_LP BIT(3)
+#define RK806_INT_STS_HOTDIE BIT(4)
+#define RK806_INT_STS_VDC_RISE BIT(5)
+#define RK806_INT_STS_VDC_FALL BIT(6)
+#define RK806_INT_STS_VB_LO BIT(7)
+#define RK806_INT_STS_REV0 BIT(0)
+#define RK806_INT_STS_REV1 BIT(1)
+#define RK806_INT_STS_REV2 BIT(2)
+#define RK806_INT_STS_CRC_ERROR BIT(3)
+#define RK806_INT_STS_SLP3_GPIO BIT(4)
+#define RK806_INT_STS_SLP2_GPIO BIT(5)
+#define RK806_INT_STS_SLP1_GPIO BIT(6)
+#define RK806_INT_STS_WDT BIT(7)
+
+/* spi command */
+#define RK806_CMD_READ 0
+#define RK806_CMD_WRITE BIT(7)
+#define RK806_CMD_CRC_EN BIT(6)
+#define RK806_CMD_CRC_DIS 0
+#define RK806_CMD_LEN_MSK 0x0f
+#define RK806_REG_H 0x00
+
+#define VERSION_AB 0x01
+
+enum rk806_reg_id {
+ RK806_ID_DCDC1 = 0,
+ RK806_ID_DCDC2,
+ RK806_ID_DCDC3,
+ RK806_ID_DCDC4,
+ RK806_ID_DCDC5,
+ RK806_ID_DCDC6,
+ RK806_ID_DCDC7,
+ RK806_ID_DCDC8,
+ RK806_ID_DCDC9,
+ RK806_ID_DCDC10,
+
+ RK806_ID_NLDO1,
+ RK806_ID_NLDO2,
+ RK806_ID_NLDO3,
+ RK806_ID_NLDO4,
+ RK806_ID_NLDO5,
+
+ RK806_ID_PLDO1,
+ RK806_ID_PLDO2,
+ RK806_ID_PLDO3,
+ RK806_ID_PLDO4,
+ RK806_ID_PLDO5,
+ RK806_ID_PLDO6,
+ RK806_ID_END,
+};
+
+/* Define the rk806 IRQ numbers */
+enum rk806_irqs {
+ /* INT_STS0 registers */
+ RK806_IRQ_PWRON_FALL,
+ RK806_IRQ_PWRON_RISE,
+ RK806_IRQ_PWRON,
+ RK806_IRQ_PWRON_LP,
+ RK806_IRQ_HOTDIE,
+ RK806_IRQ_VDC_RISE,
+ RK806_IRQ_VDC_FALL,
+ RK806_IRQ_VB_LO,
+
+ /* INT_STS0 registers */
+ RK806_IRQ_REV0,
+ RK806_IRQ_REV1,
+ RK806_IRQ_REV2,
+ RK806_IRQ_CRC_ERROR,
+ RK806_IRQ_SLP3_GPIO,
+ RK806_IRQ_SLP2_GPIO,
+ RK806_IRQ_SLP1_GPIO,
+ RK806_IRQ_WDT,
+};
+
+/* VCC1 low voltage threshold */
+enum rk806_lv_sel {
+ VB_LO_SEL_2800,
+ VB_LO_SEL_2900,
+ VB_LO_SEL_3000,
+ VB_LO_SEL_3100,
+ VB_LO_SEL_3200,
+ VB_LO_SEL_3300,
+ VB_LO_SEL_3400,
+ VB_LO_SEL_3500,
+};
+
+/* system shut down voltage select */
+enum rk806_uv_sel {
+ VB_UV_SEL_2700,
+ VB_UV_SEL_2800,
+ VB_UV_SEL_2900,
+ VB_UV_SEL_3000,
+ VB_UV_SEL_3100,
+ VB_UV_SEL_3200,
+ VB_UV_SEL_3300,
+ VB_UV_SEL_3400,
+};
+
+/* pin function */
+enum rk806_pwrctrl_fun {
+ PWRCTRL_NULL_FUN,
+ PWRCTRL_SLP_FUN,
+ PWRCTRL_POWOFF_FUN,
+ PWRCTRL_RST_FUN,
+ PWRCTRL_DVS_FUN,
+ PWRCTRL_GPIO_FUN,
+};
+
+/* pin pol */
+enum rk806_pin_level {
+ POL_LOW,
+ POL_HIGH,
+};
+
+enum rk806_vsel_ctr_sel {
+ CTR_BY_NO_EFFECT,
+ CTR_BY_PWRCTRL1,
+ CTR_BY_PWRCTRL2,
+ CTR_BY_PWRCTRL3,
+};
+
+enum rk806_dvs_ctr_sel {
+ CTR_SEL_NO_EFFECT,
+ CTR_SEL_DVS_START1,
+ CTR_SEL_DVS_START2,
+ CTR_SEL_DVS_START3,
+};
+
+enum rk806_pin_dr_sel {
+ RK806_PIN_INPUT,
+ RK806_PIN_OUTPUT,
+};
+
+#define RK806_INT_POL_MSK BIT(1)
+#define RK806_INT_POL_H BIT(1)
+#define RK806_INT_POL_L 0
+
+#define RK806_SLAVE_RESTART_FUN_MSK BIT(1)
+#define RK806_SLAVE_RESTART_FUN_EN BIT(1)
+#define RK806_SLAVE_RESTART_FUN_OFF 0
+
+#define RK806_SYS_ENB2_2M_MSK BIT(1)
+#define RK806_SYS_ENB2_2M_EN BIT(1)
+#define RK806_SYS_ENB2_2M_OFF 0
+
+enum rk806_int_fun {
+ RK806_INT_ONLY,
+ RK806_INT_ADN_WKUP,
+};
+
+enum rk806_dvs_mode {
+ RK806_DVS_NOT_SUPPORT,
+ RK806_DVS_START1,
+ RK806_DVS_START2,
+ RK806_DVS_START3,
+ RK806_DVS_PWRCTRL1,
+ RK806_DVS_PWRCTRL2,
+ RK806_DVS_PWRCTRL3,
+ RK806_DVS_START_PWRCTR1,
+ RK806_DVS_START_PWRCTR2,
+ RK806_DVS_START_PWRCTR3,
+ RK806_DVS_END,
+};
+
/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
@@ -689,6 +1097,7 @@ enum {
enum {
RK805_ID = 0x8050,
+ RK806_ID = 0x8060,
RK808_ID = 0x0000,
RK809_ID = 0x8090,
RK817_ID = 0x8170,
Add support for SPI connected rk806, which is used by the RK3588 evaluation boards. The PMIC is advertised to support I2C and SPI, but the evaluation boards all use SPI. Thus only SPI support is added here. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- drivers/mfd/Kconfig | 14 ++ drivers/mfd/Makefile | 1 + drivers/mfd/rk8xx-core.c | 67 ++++++- drivers/mfd/rk8xx-spi.c | 128 ++++++++++++ include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 617 insertions(+), 2 deletions(-) create mode 100644 drivers/mfd/rk8xx-spi.c