| Message ID | 20220830230012.9429-1-pali@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] dt-bindings: reset: syscon-reboot: Add priority property | expand |
On Wednesday 31 August 2022 10:31:22 Krzysztof Kozlowski wrote: > On 31/08/2022 02:00, Pali Rohár wrote: > > This new optional priority property allows to specify custom priority level > > of reset device. Default level was always 192. > > You still did not explain why do we need this. You only explained what > you did here, which is obvious and visible from the diff. What you > should explain is why you are doing it, what problem you are solving. > > Best regards, > Krzysztof Look at patch 3/3, thanks.
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml index da2509724812..4c8b0d0a0111 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -42,6 +42,11 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: The reset value written to the reboot register (32 bit access). + priority: + $ref: /schemas/types.yaml#/definitions/int32 + description: Priority level of this syscon reset device. + default: 192 + required: - compatible - offset
This new optional priority property allows to specify custom priority level of reset device. Default level was always 192. Signed-off-by: Pali Rohár <pali@kernel.org> --- Changes in v2: * Change sint32 to int32 * Add default --- .../devicetree/bindings/power/reset/syscon-reboot.yaml | 5 +++++ 1 file changed, 5 insertions(+)