@@ -37,6 +37,7 @@ properties:
patternProperties:
"^ethernet-port@[0-9]+$":
type: object
+ unevaluatedProperties: false
description: contains the resources for ethernet port
allOf:
- $ref: ethernet-controller.yaml#
@@ -74,16 +74,20 @@ properties:
ethernet-ports:
type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
patternProperties:
"^port@[0-9a-f]+$":
- type: object
+ $ref: /schemas/net/ethernet-controller.yaml#
+ unevaluatedProperties: false
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
-
reg:
description: Switch port number
@@ -93,29 +97,11 @@ properties:
phandle of a Ethernet SerDes PHY. This defines which SerDes
instance will handle the Ethernet traffic.
- phy-mode:
- description:
- This specifies the interface used by the Ethernet SerDes towards
- the PHY or SFP.
-
microchip,bandwidth:
description: Specifies bandwidth in Mbit/s allocated to the port.
$ref: "/schemas/types.yaml#/definitions/uint32"
maximum: 25000
- phy-handle:
- description:
- phandle of a Ethernet PHY. This is optional and if provided it
- points to the cuPHY used by the Ethernet SerDes.
-
- sfp:
- description:
- phandle of an SFP. This is optional and used when not specifying
- a cuPHY. It points to the SFP node that describes the SFP used by
- the Ethernet SerDes.
-
- managed: true
-
microchip,sd-sgpio:
description:
Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
@@ -32,6 +32,7 @@ properties:
ethernet-ports:
type: object
+ additionalProperties: false
description: Ethernet ports to PHY
properties:
@@ -44,6 +45,7 @@ properties:
patternProperties:
"^port@[0-1]$":
type: object
+ additionalProperties: false
description: Port to PHY
properties:
@@ -77,6 +77,8 @@ properties:
ethernet-ports:
type: object
+ additionalProperties: false
+
properties:
'#address-cells':
const: 1
@@ -89,6 +91,7 @@ properties:
description: CPSW external ports
$ref: ethernet-controller.yaml#
+ unevaluatedProperties: false
properties:
reg:
@@ -117,6 +120,7 @@ properties:
cpts:
type: object
+ unevaluatedProperties: false
description:
The Common Platform Time Sync (CPTS) module
@@ -115,6 +115,7 @@ properties:
description: CPSWxG NUSS external ports
$ref: ethernet-controller.yaml#
+ unevaluatedProperties: false
properties:
reg:
@@ -95,6 +95,7 @@ properties:
refclk-mux:
type: object
+ additionalProperties: false
description: CPTS reference clock multiplexer clock
properties:
'#clock-cells':
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Add missing properties/$refs as exposed by this addition. Signed-off-by: Rob Herring <robh@kernel.org> --- v2: - Add microchip,sparx5-switch.yaml and sunplus,sp7021-emac.yaml --- .../bindings/net/cortina,gemini-ethernet.yaml | 1 + .../bindings/net/microchip,sparx5-switch.yaml | 34 ++++++------------- .../bindings/net/sunplus,sp7021-emac.yaml | 2 ++ .../bindings/net/ti,cpsw-switch.yaml | 4 +++ .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 1 + .../bindings/net/ti,k3-am654-cpts.yaml | 1 + 6 files changed, 19 insertions(+), 24 deletions(-)