diff mbox series

[v2,1/6] phy: qcom-qmp-pcie: drop if (table) conditions

Message ID 20220825105044.636209-2-dmitry.baryshkov@linaro.org
State Accepted
Commit 95153de6b92818a132b9a2f7361ecd6e191f6aad
Headers show
Series PCI: qcom: Support using the same PHY for both RC and EP | expand

Commit Message

Dmitry Baryshkov Aug. 25, 2022, 10:50 a.m. UTC
Drop unused if (table) conditions, since the function
qcom_qmp_phy_pcie_configure_lane() has this check anyway.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 2d65e1f56bfc..c84846020272 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1930,8 +1930,7 @@  static int qcom_qmp_phy_pcie_serdes_init(struct qmp_phy *qphy)
 	int serdes_tbl_num = cfg->serdes_tbl_num;
 
 	qcom_qmp_phy_pcie_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
-	if (cfg->serdes_tbl_sec)
-		qcom_qmp_phy_pcie_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
+	qcom_qmp_phy_pcie_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
 				       cfg->serdes_tbl_num_sec);
 
 	return 0;
@@ -2037,44 +2036,38 @@  static int qcom_qmp_phy_pcie_power_on(struct phy *phy)
 	/* Tx, Rx, and PCS configurations */
 	qcom_qmp_phy_pcie_configure_lane(tx, cfg->regs,
 				    cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	if (cfg->tx_tbl_sec)
-		qcom_qmp_phy_pcie_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
+	qcom_qmp_phy_pcie_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
 					    cfg->tx_tbl_num_sec, 1);
 
 	/* Configuration for other LANE for USB-DP combo PHY */
 	if (cfg->is_dual_lane_phy) {
 		qcom_qmp_phy_pcie_configure_lane(qphy->tx2, cfg->regs,
 					    cfg->tx_tbl, cfg->tx_tbl_num, 2);
-		if (cfg->tx_tbl_sec)
-			qcom_qmp_phy_pcie_configure_lane(qphy->tx2, cfg->regs,
+		qcom_qmp_phy_pcie_configure_lane(qphy->tx2, cfg->regs,
 						    cfg->tx_tbl_sec,
 						    cfg->tx_tbl_num_sec, 2);
 	}
 
 	qcom_qmp_phy_pcie_configure_lane(rx, cfg->regs,
 				    cfg->rx_tbl, cfg->rx_tbl_num, 1);
-	if (cfg->rx_tbl_sec)
-		qcom_qmp_phy_pcie_configure_lane(rx, cfg->regs,
+	qcom_qmp_phy_pcie_configure_lane(rx, cfg->regs,
 					    cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
 
 	if (cfg->is_dual_lane_phy) {
 		qcom_qmp_phy_pcie_configure_lane(qphy->rx2, cfg->regs,
 					    cfg->rx_tbl, cfg->rx_tbl_num, 2);
-		if (cfg->rx_tbl_sec)
-			qcom_qmp_phy_pcie_configure_lane(qphy->rx2, cfg->regs,
+		qcom_qmp_phy_pcie_configure_lane(qphy->rx2, cfg->regs,
 						    cfg->rx_tbl_sec,
 						    cfg->rx_tbl_num_sec, 2);
 	}
 
 	qcom_qmp_phy_pcie_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
-	if (cfg->pcs_tbl_sec)
-		qcom_qmp_phy_pcie_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
+	qcom_qmp_phy_pcie_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
 				       cfg->pcs_tbl_num_sec);
 
 	qcom_qmp_phy_pcie_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
 			       cfg->pcs_misc_tbl_num);
-	if (cfg->pcs_misc_tbl_sec)
-		qcom_qmp_phy_pcie_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
+	qcom_qmp_phy_pcie_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
 				       cfg->pcs_misc_tbl_num_sec);
 
 	/*