diff mbox series

[v2,3/6] arm64: dts: ls2080a-rdb: add phy nodes

Message ID 20220817204357.21753-4-leoyang.li@nxp.com
State New
Headers show
Series [v2,1/6] arm64: dts: ls2080a-qds: add mdio mux nodes from on-board FPGA | expand

Commit Message

Leo Li Aug. 17, 2022, 8:43 p.m. UTC 
Define PHY nodes on the board.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 .../boot/dts/freescale/fsl-ls2080a-rdb.dts    | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 44894356059c..fec02fd754be 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -23,3 +23,71 @@  chosen {
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "disabled";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1-phy@1 {
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: emdio1-phy@2 {
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: emdio1-phy@3 {
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: emdio1-phy@4 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 1 0x4>; /* Level high type */
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: emdio2-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 2 0x4>; /* Level high type */
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: emdio2-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 4 0x4>; /* Level high type */
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: emdio2-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 5 0x4>; /* Level high type */
+		reg = <0x3>;
+	};
+};