diff mbox series

soundwire: qcom: remove duplicate reset control get

Message ID 20220814123800.31200-1-srinivas.kandagatla@linaro.org
State Accepted
Commit c6e50787889c8d55db65c769dccee98c7fcd1732
Headers show
Series soundwire: qcom: remove duplicate reset control get | expand

Commit Message

Srinivas Kandagatla Aug. 14, 2022, 12:38 p.m. UTC
Looks like adding clock gate flag patch forgot to remove the old code that
gets reset control.

This causes below crash on platforms that do not need reset.

[   15.653501]  reset_control_reset+0x124/0x170
[   15.653508]  qcom_swrm_init+0x50/0x1a0
[   15.653514]  qcom_swrm_probe+0x320/0x668
[   15.653519]  platform_probe+0x68/0xe0
[   15.653529]  really_probe+0xbc/0x2a8
[   15.653535]  __driver_probe_device+0x7c/0xe8
[   15.653541]  driver_probe_device+0x40/0x110
[   15.653547]  __device_attach_driver+0x98/0xd0
[   15.653553]  bus_for_each_drv+0x68/0xd0
[   15.653559]  __device_attach+0xf4/0x188
[   15.653565]  device_initial_probe+0x14/0x20

Fix this by removing old code.

Reported-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: 1fd0d85affe4 ("soundwire: qcom: Add flag for software clock gating check")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/soundwire/qcom.c | 4 ----
 1 file changed, 4 deletions(-)

Comments

Vinod Koul Aug. 23, 2022, 3:58 p.m. UTC | #1
On 14-08-22, 13:38, Srinivas Kandagatla wrote:
> Looks like adding clock gate flag patch forgot to remove the old code that
> gets reset control.
> 
> This causes below crash on platforms that do not need reset.
> 
> [   15.653501]  reset_control_reset+0x124/0x170
> [   15.653508]  qcom_swrm_init+0x50/0x1a0
> [   15.653514]  qcom_swrm_probe+0x320/0x668
> [   15.653519]  platform_probe+0x68/0xe0
> [   15.653529]  really_probe+0xbc/0x2a8
> [   15.653535]  __driver_probe_device+0x7c/0xe8
> [   15.653541]  driver_probe_device+0x40/0x110
> [   15.653547]  __device_attach_driver+0x98/0xd0
> [   15.653553]  bus_for_each_drv+0x68/0xd0
> [   15.653559]  __device_attach+0xf4/0x188
> [   15.653565]  device_initial_probe+0x14/0x20
> 
> Fix this by removing old code.

Applied, thanks
diff mbox series

Patch

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 9df970eeca45..a43961ad4614 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -1356,10 +1356,6 @@  static int qcom_swrm_probe(struct platform_device *pdev)
 	ctrl->bus.compute_params = &qcom_swrm_compute_params;
 	ctrl->bus.clk_stop_timeout = 300;
 
-	ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
-	if (IS_ERR(ctrl->audio_cgcr))
-		dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n");
-
 	ret = qcom_swrm_get_port_config(ctrl);
 	if (ret)
 		goto err_clk;