diff mbox

[2/4] ARM: S5PV210: Enable MFC on SMDKC110

Message ID 1324893613-5469-3-git-send-email-sachin.kamat@linaro.org
State Superseded
Headers show

Commit Message

Sachin Kamat Dec. 26, 2011, 10 a.m. UTC 
This patch adds MFC support on SMDKC110 board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
 arch/arm/mach-s5pv210/Kconfig         |    1 +
 arch/arm/mach-s5pv210/mach-smdkc110.c |   11 +++++++++++
 2 files changed, 12 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 251491d..32893c7 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -113,6 +113,7 @@  config MACH_SMDKC110
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S5P_DEV_MFC
 	select SAMSUNG_DEV_IDE
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f7266bb..0087c7b 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -31,6 +31,7 @@ 
 #include <plat/iic.h>
 #include <plat/pm.h>
 #include <plat/s5p-time.h>
+#include <plat/mfc.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -92,6 +93,9 @@  static struct platform_device *smdkc110_devices[] __initdata = {
 	&s3c_device_i2c2,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 };
 
 static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
@@ -115,6 +119,12 @@  static void __init smdkc110_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void __init smdkc110_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+
 static void __init smdkc110_machine_init(void)
 {
 	s3c_pm_init();
@@ -141,4 +151,5 @@  MACHINE_START(SMDKC110, "SMDKC110")
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
 	.timer		= &s5p_timer,
+	.reserve	= &smdkc110_reserve,
 MACHINE_END