| Message ID | 20220810111037.280959-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 7b7c66ec81d80581939d3d774491acd761808f20 |
| Headers | show |
| Series | ARM: dts: ste: ux500: align SPI node name with dtschema | expand |
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts index d6940e0afa86..17dff403f77a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -239,7 +239,7 @@ magnetometer@c { }; }; - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220, pin SCL */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 5f41256d7f4b..9db490cc395b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -325,7 +325,7 @@ nfc@2b { }; }; - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220, pin SCL */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index 806da3fc33cd..79d43fc68cd8 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -269,7 +269,7 @@ magnetometer@2e { /* * TODO: See if we can use the PL023 for this instead. */ - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220, pin SCL */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index ed5c79c3d04b..b34bd19ad815 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -263,7 +263,7 @@ magnetometer@2e { * this derivative is 3wire support, so it cannot be used to drive * this panel interface. We have to use GPIO bit-banging instead. */ - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220 */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts | 2 +- arch/arm/boot/dts/ste-ux500-samsung-codina.dts | 2 +- arch/arm/boot/dts/ste-ux500-samsung-gavini.dts | 2 +- arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)