diff mbox series

[RFC] usb: dwc2: Call core_init after disconnect

Message ID 20220802081903.384867-1-michael@amarulasolutions.com
State New
Headers show
Series [RFC] usb: dwc2: Call core_init after disconnect | expand

Commit Message

Michael Nazzareno Trimarchi Aug. 2, 2022, 8:19 a.m. UTC
Call dwc2_hsotg_core_init_disconnected in order to restart
the gadget device session, otherwise the device will remain
in unconsistent state. I have tested on 4.4 kernel but I did
not find any reason how should work now. Basically what happen
is the ep0 has a startup request enqueue but the connected state
is not still get. The session End Detected does not kill any pending
urb so, the complete for the urb was not delivered, the core is not
able to complete the setup because urb is on the queue, and the
core is unable to restart.

Testing was done on PX30 cpu with g_multi gadget (enable ethernet, usb
storage)

[46250.026071] dwc2 ff300000.usb: gintsts=0400802c  gintmsk=d0bc3cc4
[46250.026114] dwc2 ff300000.usb: ++OTG Interrupt gotgint=4 [b_peripheral]
[46250.026142] dwc2 ff300000.usb:  ++OTG Interrupt: Session End Detected++ (b_peripheral)
[46250.026159] call disconnect
[46250.026197] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.391509] dwc2 ff300000.usb: gintsts=44008028  gintmsk=d0bc3cc4
[46253.391551] dwc2 ff300000.usb: Session request interrupt - lx_state=0
[46253.391595] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.406548] dwc2 ff300000.usb: dwc2_hsotg_irq: 04809028 00801000 (d0bc3cc4) retry 8
[46253.406587] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRstDet
[46253.406616] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46253.406642] dwc2 ff300000.usb: GNPTXSTS=00080010
[46253.409549] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46253.409585] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46253.412604] dwc2 ff300000.usb: gintsts=04008828  gintmsk=d0bc3cc4
[46253.412641] dwc2 ff300000.usb: USB SUSPEND
[46253.412668] dwc2 ff300000.usb: DSTS=0x31103
[46253.412696] dwc2 ff300000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=1
[46253.412722] dwc2 ff300000.usb: ignore suspend request before enumeration
[46253.412757] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.612215] phy phy-ff2c0000.syscon:usb2-phy@100.0: charger = USB_SDP_CHARGER
[46253.615388] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46253.615428] dwc2 ff300000.usb: EnumDone (DSTS=0x00431102)
[46253.615456] dwc2 ff300000.usb: new device is full-speed
[46253.615492] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46253.615518] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46253.615547] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
[46253.617420] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46253.617456] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46253.620472] dwc2 ff300000.usb: gintsts=04008828  gintmsk=d0bc3cc4
[46253.620508] dwc2 ff300000.usb: USB SUSPEND
[46253.620535] dwc2 ff300000.usb: DSTS=0x431103
[46253.620563] dwc2 ff300000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=1
[46253.620589] dwc2 ff300000.usb: ignore suspend request before enumeration
[46253.620624] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.757245] dwc2 ff300000.usb: dwc2_hsotg_irq: 04809028 00801000 (d0bc3cc4) retry 8
[46253.757285] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRstDet
[46253.757312] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46253.757338] dwc2 ff300000.usb: GNPTXSTS=00080010
[46253.814352] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46253.814395] dwc2 ff300000.usb: EnumDone (DSTS=0x00188800)
[46253.814421] dwc2 ff300000.usb: new device is high-speed
[46253.814456] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46253.814483] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46253.814512] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
[46253.885421] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46253.885463] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46253.885496] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46259.108181] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46259.108221] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46259.108600] dwc2 ff300000.usb: dwc2_hsotg_irq: 04009028 00001000 (d0bc3cc4) retry 8
[46259.108632] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46259.108659] dwc2 ff300000.usb: GNPTXSTS=00080010
[46259.162264] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46259.162304] dwc2 ff300000.usb: EnumDone (DSTS=0x000b1800)
[46259.162332] dwc2 ff300000.usb: new device is high-speed
[46259.162367] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46259.162393] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46259.162423] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
[46259.344960] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46259.345002] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46259.345036] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46264.481549] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46264.481592] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46264.481625] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46269.605279] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46269.605322] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46269.605356] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46274.724165] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46274.724205] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46274.724574] dwc2 ff300000.usb: dwc2_hsotg_irq: 04009028 00001000 (d0bc3cc4) retry 8
[46274.724606] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46274.724632] dwc2 ff300000.usb: GNPTXSTS=00080010
[46274.778137] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46274.778179] dwc2 ff300000.usb: EnumDone (DSTS=0x00331800)
[46274.778207] dwc2 ff300000.usb: new device is high-speed
[46274.778242] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46274.778268] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46274.778297] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
---
 drivers/usb/dwc2/gadget.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index fe2a58c75861..4c1e10a62bde 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3732,7 +3732,6 @@  static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
 
 	if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
 		u32 usb_status = dwc2_readl(hsotg, GOTGCTL);
-		u32 connected = hsotg->connected;
 
 		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
 		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
@@ -3746,7 +3745,7 @@  static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
 		/* Reset device address to zero */
 		dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
 
-		if (usb_status & GOTGCTL_BSESVLD && connected)
+		if (usb_status & GOTGCTL_BSESVLD)
 			dwc2_hsotg_core_init_disconnected(hsotg, true);
 	}