@@ -99,9 +99,10 @@ extern atomic64_t event_counter;
#define MPI3MR_HOSTTAG_PEL_WAIT 4
#define MPI3MR_HOSTTAG_BLK_TMS 5
#define MPI3MR_HOSTTAG_CFG_CMDS 6
+#define MPI3MR_HOSTTAG_TRANSPORT_CMDS 7
#define MPI3MR_NUM_DEVRMCMD 16
-#define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_BLK_TMS + 1)
+#define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_TRANSPORT_CMDS + 1)
#define MPI3MR_HOSTTAG_DEVRMCMD_MAX (MPI3MR_HOSTTAG_DEVRMCMD_MIN + \
MPI3MR_NUM_DEVRMCMD - 1)
@@ -279,6 +280,7 @@ enum mpi3mr_reset_reason {
MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24,
MPI3MR_RESET_FROM_FIRMWARE = 27,
MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29,
+ MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30,
};
/* Queue type definitions */
@@ -1004,6 +1006,7 @@ struct scmd_priv {
* @cfg_page_sz: Default configuration page memory size
* @sas_transport_enabled: SAS transport enabled or not
* @scsi_device_channel: Channel ID for SCSI devices
+ * @transport_cmds: Command tracker for SAS transport commands
* @sas_hba: SAS node for the controller
* @sas_expander_list: SAS node list of expanders
* @sas_node_lock: Lock to protect SAS node list
@@ -1188,6 +1191,7 @@ struct mpi3mr_ioc {
u8 sas_transport_enabled;
u8 scsi_device_channel;
+ struct mpi3mr_drv_cmd transport_cmds;
struct mpi3mr_sas_node sas_hba;
struct list_head sas_expander_list;
spinlock_t sas_node_lock;
@@ -312,6 +312,8 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag,
return &mrioc->pel_abort_cmd;
case MPI3MR_HOSTTAG_PEL_WAIT:
return &mrioc->pel_cmds;
+ case MPI3MR_HOSTTAG_TRANSPORT_CMDS:
+ return &mrioc->transport_cmds;
case MPI3MR_HOSTTAG_INVALID:
if (def_reply && def_reply->function ==
MPI3_FUNCTION_EVENT_NOTIFICATION)
@@ -913,6 +915,7 @@ static const struct {
{ MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" },
{ MPI3MR_RESET_FROM_FIRMWARE, "firmware asynchronous reset" },
{ MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT, "configuration request timeout"},
+ { MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT, "timeout of a SAS transport layer request" },
};
/**
@@ -2866,6 +2869,10 @@ static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc)
if (!mrioc->bsg_cmds.reply)
goto out_failed;
+ mrioc->transport_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL);
+ if (!mrioc->transport_cmds.reply)
+ goto out_failed;
+
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) {
mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->reply_sz,
GFP_KERNEL);
@@ -4072,6 +4079,8 @@ void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc)
sizeof(*mrioc->pel_cmds.reply));
memset(mrioc->pel_abort_cmd.reply, 0,
sizeof(*mrioc->pel_abort_cmd.reply));
+ memset(mrioc->transport_cmds.reply, 0,
+ sizeof(*mrioc->transport_cmds.reply));
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
memset(mrioc->dev_rmhs_cmds[i].reply, 0,
sizeof(*mrioc->dev_rmhs_cmds[i].reply));
@@ -4217,6 +4226,9 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
kfree(mrioc->chain_bitmap);
mrioc->chain_bitmap = NULL;
+ kfree(mrioc->transport_cmds.reply);
+ mrioc->transport_cmds.reply = NULL;
+
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) {
kfree(mrioc->dev_rmhs_cmds[i].reply);
mrioc->dev_rmhs_cmds[i].reply = NULL;
@@ -4417,6 +4429,8 @@ static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc)
cmdptr = &mrioc->pel_abort_cmd;
mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr);
+ cmdptr = &mrioc->transport_cmds;
+ mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr);
}
/**
@@ -4841,6 +4841,8 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mpi3mr_init_drv_cmd(&mrioc->host_tm_cmds, MPI3MR_HOSTTAG_BLK_TMS);
mpi3mr_init_drv_cmd(&mrioc->bsg_cmds, MPI3MR_HOSTTAG_BSG_CMDS);
mpi3mr_init_drv_cmd(&mrioc->cfg_cmds, MPI3MR_HOSTTAG_CFG_CMDS);
+ mpi3mr_init_drv_cmd(&mrioc->transport_cmds,
+ MPI3MR_HOSTTAG_TRANSPORT_CMDS);
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i],
@@ -9,6 +9,225 @@
#include "mpi3mr.h"
+/**
+ * mpi3mr_post_transport_req - Issue transport requests and wait
+ * @mrioc: Adapter instance reference
+ * @request: Properly populated MPI3 request
+ * @request_sz: Size of the MPI3 request
+ * @reply: Pointer to return MPI3 reply
+ * @reply_sz: Size of the MPI3 reply buffer
+ * @timeout: Timeout in seconds
+ * @ioc_status: Pointer to return ioc status
+ *
+ * A generic function for posting MPI3 requests from the SAS
+ * transport layer that uses transport command infrastructure.
+ * This blocks for the completion of request for timeout seconds
+ * and if the request times out this function faults the
+ * controller with proper reason code.
+ *
+ * On successful completion of the request this function returns
+ * appropriate ioc status from the firmware back to the caller.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_post_transport_req(struct mpi3mr_ioc *mrioc, void *request,
+ u16 request_sz, void *reply, u16 reply_sz, int timeout,
+ u16 *ioc_status)
+{
+ int retval = 0;
+
+ mutex_lock(&mrioc->transport_cmds.mutex);
+ if (mrioc->transport_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "sending transport request failed due to command in use\n");
+ mutex_unlock(&mrioc->transport_cmds.mutex);
+ goto out;
+ }
+ mrioc->transport_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->transport_cmds.is_waiting = 1;
+ mrioc->transport_cmds.callback = NULL;
+ mrioc->transport_cmds.ioc_status = 0;
+ mrioc->transport_cmds.ioc_loginfo = 0;
+
+ init_completion(&mrioc->transport_cmds.done);
+ dprint_cfg_info(mrioc, "posting transport request\n");
+ if (mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO)
+ dprint_dump(request, request_sz, "transport_req");
+ retval = mpi3mr_admin_request_post(mrioc, request, request_sz, 1);
+ if (retval) {
+ ioc_err(mrioc, "posting transport request failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->transport_cmds.done,
+ (timeout * HZ));
+ if (!(mrioc->transport_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ mpi3mr_check_rh_fault_ioc(mrioc,
+ MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT);
+ ioc_err(mrioc, "transport request timed out\n");
+ retval = -1;
+ goto out_unlock;
+ }
+ *ioc_status = mrioc->transport_cmds.ioc_status &
+ MPI3_IOCSTATUS_STATUS_MASK;
+ if ((*ioc_status) != MPI3_IOCSTATUS_SUCCESS)
+ dprint_transport_err(mrioc,
+ "transport request returned with ioc_status(0x%04x), log_info(0x%08x)\n",
+ *ioc_status, mrioc->transport_cmds.ioc_loginfo);
+
+ if ((reply) && (mrioc->transport_cmds.state & MPI3MR_CMD_REPLY_VALID))
+ memcpy((u8 *)reply, mrioc->transport_cmds.reply, reply_sz);
+
+out_unlock:
+ mrioc->transport_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->transport_cmds.mutex);
+
+out:
+ return retval;
+}
+
+/* report manufacture request structure */
+struct rep_manu_request {
+ u8 smp_frame_type;
+ u8 function;
+ u8 reserved;
+ u8 request_length;
+};
+
+/* report manufacture reply structure */
+struct rep_manu_reply {
+ u8 smp_frame_type; /* 0x41 */
+ u8 function; /* 0x01 */
+ u8 function_result;
+ u8 response_length;
+ u16 expander_change_count;
+ u8 reserved0[2];
+ u8 sas_format;
+ u8 reserved2[3];
+ u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
+ u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
+ u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
+ u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
+ u16 component_id;
+ u8 component_revision_id;
+ u8 reserved3;
+ u8 vendor_specific[8];
+};
+
+/**
+ * mpi3mr_report_manufacture - obtain SMP report_manufacture
+ * @mrioc: Adapter instance reference
+ * @sas_address: SAS address of the expander device
+ * @edev: SAS transport layer sas_expander_device object
+ * @port_id: ID of the HBA port
+ *
+ * Fills in the sas_expander_device with manufacturing info.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int mpi3mr_report_manufacture(struct mpi3mr_ioc *mrioc,
+ u64 sas_address, struct sas_expander_device *edev, u8 port_id)
+{
+ struct mpi3_smp_passthrough_request mpi_request;
+ struct mpi3_smp_passthrough_reply mpi_reply;
+ struct rep_manu_reply *manufacture_reply;
+ struct rep_manu_request *manufacture_request;
+ int rc = 0;
+ void *psge;
+ void *data_out = NULL;
+ dma_addr_t data_out_dma;
+ dma_addr_t data_in_dma;
+ size_t data_in_sz;
+ size_t data_out_sz;
+ u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST;
+ u16 request_sz = sizeof(struct mpi3_smp_passthrough_request);
+ u16 reply_sz = sizeof(struct mpi3_smp_passthrough_reply);
+ u16 ioc_status;
+
+ if (mrioc->reset_in_progress) {
+ ioc_err(mrioc, "%s: host reset in progress!\n", __func__);
+ return -EFAULT;
+ }
+
+ data_out_sz = sizeof(struct rep_manu_request);
+ data_in_sz = sizeof(struct rep_manu_reply);
+ data_out = dma_alloc_coherent(&mrioc->pdev->dev,
+ data_out_sz + data_in_sz, &data_out_dma, GFP_KERNEL);
+ if (!data_out) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ data_in_dma = data_out_dma + data_out_sz;
+ manufacture_reply = data_out + data_out_sz;
+
+ manufacture_request = data_out;
+ manufacture_request->smp_frame_type = 0x40;
+ manufacture_request->function = 1;
+ manufacture_request->reserved = 0;
+ manufacture_request->request_length = 0;
+
+ memset(&mpi_request, 0, request_sz);
+ memset(&mpi_reply, 0, reply_sz);
+ mpi_request.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_TRANSPORT_CMDS);
+ mpi_request.function = MPI3_FUNCTION_SMP_PASSTHROUGH;
+ mpi_request.io_unit_port = (u8) port_id;
+ mpi_request.sas_address = cpu_to_le64(sas_address);
+
+ psge = &mpi_request.request_sge;
+ mpi3mr_add_sg_single(psge, sgl_flags, data_out_sz, data_out_dma);
+
+ psge = &mpi_request.response_sge;
+ mpi3mr_add_sg_single(psge, sgl_flags, data_in_sz, data_in_dma);
+
+ dprint_transport_info(mrioc,
+ "sending report manufacturer SMP request to sas_address(0x%016llx), port(%d)\n",
+ (unsigned long long)sas_address, port_id);
+
+ if (mpi3mr_post_transport_req(mrioc, &mpi_request, request_sz,
+ &mpi_reply, reply_sz, MPI3MR_INTADMCMD_TIMEOUT, &ioc_status))
+ goto out;
+
+ dprint_transport_info(mrioc,
+ "report manufacturer SMP request completed with ioc_status(0x%04x)\n",
+ ioc_status);
+
+ if (ioc_status == MPI3_IOCSTATUS_SUCCESS) {
+ u8 *tmp;
+
+ dprint_transport_info(mrioc,
+ "report manufacturer - reply data transfer size(%d)\n",
+ le16_to_cpu(mpi_reply.response_data_length));
+
+ if (le16_to_cpu(mpi_reply.response_data_length) !=
+ sizeof(struct rep_manu_reply))
+ goto out;
+
+ strscpy(edev->vendor_id, manufacture_reply->vendor_id,
+ SAS_EXPANDER_VENDOR_ID_LEN);
+ strscpy(edev->product_id, manufacture_reply->product_id,
+ SAS_EXPANDER_PRODUCT_ID_LEN);
+ strscpy(edev->product_rev, manufacture_reply->product_rev,
+ SAS_EXPANDER_PRODUCT_REV_LEN);
+ edev->level = manufacture_reply->sas_format & 1;
+ if (edev->level) {
+ strscpy(edev->component_vendor_id,
+ manufacture_reply->component_vendor_id,
+ SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+ tmp = (u8 *)&manufacture_reply->component_id;
+ edev->component_id = tmp[0] << 8 | tmp[1];
+ edev->component_revision_id =
+ manufacture_reply->component_revision_id;
+ }
+ }
+
+out:
+ if (data_out)
+ dma_free_coherent(&mrioc->pdev->dev, data_out_sz + data_in_sz,
+ data_out, data_out_dma);
+
+ return rc;
+}
+
/**
* __mpi3mr_expander_find_by_handle - expander search by handle
* @mrioc: Adapter instance reference
@@ -1218,6 +1437,15 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
mpi3mr_print_device_event_notice(mrioc, true);
}
+ /* fill in report manufacture */
+ if (mr_sas_port->remote_identify.device_type ==
+ SAS_EDGE_EXPANDER_DEVICE ||
+ mr_sas_port->remote_identify.device_type ==
+ SAS_FANOUT_EXPANDER_DEVICE)
+ mpi3mr_report_manufacture(mrioc,
+ mr_sas_port->remote_identify.sas_address,
+ rphy_to_expander_device(rphy), hba_port->port_id);
+
return mr_sas_port;
out_fail: