@@ -368,7 +368,7 @@ &sdhc2 {
bus-width = <4>;
- cd-gpios = <&tlmm 38 0x1>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
@@ -471,7 +471,7 @@ &sdhc1 {
&sdhc2 {
status = "okay";
- cd-gpios = <&tlmm 100 0>;
+ cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&pm8994_l21>;
vqmmc-supply = <&pm8994_l13>;
};
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
#include <dt-bindings/clock/qcom,mmcc-msm8994.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/qcom-rpmpd.h>
/ {
@@ -502,7 +503,7 @@ sdhc2: mmc@f98a4900 {
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
- cd-gpios = <&tlmm 100 0>;
+ cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "disabled";
};
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interconnect/qcom,msm8996.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/thermal/thermal.h>
@@ -3337,7 +3338,7 @@ wcd9335: codec@1{
interrupt-names = "intr1", "intr2";
interrupt-controller;
#interrupt-cells = <1>;
- reset-gpios = <&tlmm 64 0>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
slim-ifc-dev = <&tasha_ifd>;
@@ -1081,7 +1081,7 @@ &wcd9340{
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
- reset-gpios = <&tlmm 64 0>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
@@ -1251,7 +1251,7 @@ camera@60 {
reg = <0x60>;
// CAM3_RST_N
- enable-gpios = <&tlmm 21 0>;
+ enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cam3_default>;
@@ -546,7 +546,7 @@ &wcd9340{
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
- reset-gpios = <&tlmm 64 0>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
@@ -126,7 +126,7 @@ vreg_tp_vddio: vreg-tp-vddio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&tlmm 23 0>;
+ gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
@@ -712,7 +712,7 @@ &wcd9340 {
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
- reset-gpios = <&tlmm 64 0>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
@@ -772,7 +772,7 @@ &wcd9340{
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
- reset-gpios = <&tlmm 64 0>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
@@ -704,7 +704,7 @@ &wcd9340{
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
- reset-gpios = <&tlmm 64 0>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
@@ -635,7 +635,7 @@ &soc {
wcd938x: codec {
compatible = "qcom,wcd9380-codec";
#sound-dai-cells = <1>;
- reset-gpios = <&tlmm 32 0>;
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-rxtx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 2 +- arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8994.dtsi | 3 ++- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ++- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 2 +- arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 2 +- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 2 +- 10 files changed, 14 insertions(+), 12 deletions(-)