diff mbox series

[v4,06/13] regulator: qcom_spmi: Add support for LDO_510 and FTSMPS

Message ID 20220802221112.2280686-7-iskren.chernev@gmail.com
State Accepted
Commit 0d1cf568b4e0c65cb533fef2c116fb2883803c53
Headers show
Series PM6125 regulator support | expand

Commit Message

Iskren Chernev Aug. 2, 2022, 10:11 p.m. UTC 
Add support for LDO_510 and FTSMPS3 regulators, all belonging to register
layout HFSMPS. This is done in preparation for adding support for the
PM6125 PMIC.

For FTSMPS3 and LDO_510, only IDLE and NORMAL modes are selectable (no
FAST).

The inspiration for the magic constants was taken from [1]

[1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 38 ++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 04e9845a9300..0763a5b7a2ce 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -99,6 +99,8 @@  enum spmi_regulator_logical_type {
 	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
 	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO_510,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS,
 };
 
@@ -168,6 +170,16 @@  enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
 	SPMI_REGULATOR_SUBTYPE_HFSMPS_510	= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_FTSMPS_510	= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_LV_P150_510	= 0x71,
+	SPMI_REGULATOR_SUBTYPE_LV_P300_510	= 0x72,
+	SPMI_REGULATOR_SUBTYPE_LV_P600_510	= 0x73,
+	SPMI_REGULATOR_SUBTYPE_N300_510		= 0x6a,
+	SPMI_REGULATOR_SUBTYPE_N600_510		= 0x6b,
+	SPMI_REGULATOR_SUBTYPE_N1200_510	= 0x6c,
+	SPMI_REGULATOR_SUBTYPE_MV_P50_510	= 0x7a,
+	SPMI_REGULATOR_SUBTYPE_MV_P150_510	= 0x7b,
+	SPMI_REGULATOR_SUBTYPE_MV_P600_510	= 0x7d,
 };
 
 enum spmi_common_regulator_registers {
@@ -576,6 +588,14 @@  static struct spmi_voltage_range ht_p600_ranges[] = {
 	SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
 };
 
+static struct spmi_voltage_range nldo_510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 320000, 320000, 1304000, 1304000, 8000),
+};
+
+static struct spmi_voltage_range ftsmps510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 300000, 300000, 1372000, 1372000, 4000),
+};
+
 static DEFINE_SPMI_SET_POINTS(pldo);
 static DEFINE_SPMI_SET_POINTS(nldo1);
 static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -598,6 +618,8 @@  static DEFINE_SPMI_SET_POINTS(ht_nldo);
 static DEFINE_SPMI_SET_POINTS(hfs430);
 static DEFINE_SPMI_SET_POINTS(ht_p150);
 static DEFINE_SPMI_SET_POINTS(ht_p600);
+static DEFINE_SPMI_SET_POINTS(nldo_510);
+static DEFINE_SPMI_SET_POINTS(ftsmps510);
 
 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 				 int len)
@@ -1162,7 +1184,10 @@  spmi_regulator_hfsmps_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		val = SPMI_HFSMPS_MODE_AUTO_MASK;
 		break;
 	case REGULATOR_MODE_IDLE:
-		val = SPMI_HFSMPS_MODE_LPM_MASK;
+		val = vreg->logical_type ==
+				SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3 ?
+			SPMI_HFSMPS_MODE_RETENTION_MASK :
+			SPMI_HFSMPS_MODE_LPM_MASK;
 		break;
 	default:
 		return -EINVAL;
@@ -1637,6 +1662,16 @@  static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(ULT_LDO, P300,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+	SPMI_VREG(LDO, LV_P150_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P300_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P600_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, MV_P50_510,  0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P150_510, 0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P600_510, 0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, N300_510,    0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(LDO, N600_510,    0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(LDO, N1200_510,   0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(FTS, FTSMPS_510,  0, INF, FTSMPS3, hfsmps, ftsmps510, 100000),
 };
 
 static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
@@ -1955,6 +1990,7 @@  static int spmi_regulator_of_parse(struct device_node *node,
 			return ret;
 		break;
 	case SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS:
+	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3:
 		ret = spmi_regulator_init_slew_rate_hfsmps(vreg);
 		if (ret)
 			return ret;