@@ -135,13 +135,11 @@ thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
/* device tree support */
#ifdef CONFIG_THERMAL_OF
-int of_parse_thermal_zones(void);
int of_thermal_get_ntrips(struct thermal_zone_device *);
bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
const struct thermal_trip *
of_thermal_get_trip_points(struct thermal_zone_device *);
#else
-static inline int of_parse_thermal_zones(void) { return 0; }
static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz)
{
return 0;
@@ -19,93 +19,6 @@
#include "thermal_core.h"
-/*** Private data structures to represent thermal device tree data ***/
-
-/**
- * struct __thermal_cooling_bind_param - a cooling device for a trip point
- * @cooling_device: a pointer to identify the referred cooling device
- * @min: minimum cooling state used at this trip point
- * @max: maximum cooling state used at this trip point
- */
-
-struct __thermal_cooling_bind_param {
- struct device_node *cooling_device;
- unsigned long min;
- unsigned long max;
-};
-
-/**
- * struct __thermal_bind_params - a match between trip and cooling device
- * @tcbp: a pointer to an array of cooling devices
- * @count: number of elements in array
- * @trip_id: the trip point index
- * @usage: the percentage (from 0 to 100) of cooling contribution
- */
-
-struct __thermal_bind_params {
- struct __thermal_cooling_bind_param *tcbp;
- unsigned int count;
- unsigned int trip_id;
- unsigned int usage;
-};
-
-/**
- * struct __thermal_zone - internal representation of a thermal zone
- * @passive_delay: polling interval while passive cooling is activated
- * @polling_delay: zone polling interval
- * @slope: slope of the temperature adjustment curve
- * @offset: offset of the temperature adjustment curve
- * @ntrips: number of trip points
- * @trips: an array of trip points (0..ntrips - 1)
- * @num_tbps: number of thermal bind params
- * @tbps: an array of thermal bind params (0..num_tbps - 1)
- * @sensor_data: sensor private data used while reading temperature and trend
- * @ops: set of callbacks to handle the thermal zone based on DT
- */
-
-struct __thermal_zone {
- int passive_delay;
- int polling_delay;
- int slope;
- int offset;
-
- /* trip data */
- int ntrips;
- struct thermal_trip *trips;
-
- /* cooling binding data */
- int num_tbps;
- struct __thermal_bind_params *tbps;
-
- /* sensor interface */
- void *sensor_data;
- const struct thermal_zone_of_device_ops *ops;
-};
-
-/*** DT thermal zone device callbacks ***/
-
-static int of_thermal_get_temp(struct thermal_zone_device *tz,
- int *temp)
-{
- struct __thermal_zone *data = tz->devdata;
-
- if (!data->ops || !data->ops->get_temp)
- return -EINVAL;
-
- return data->ops->get_temp(data->sensor_data, temp);
-}
-
-static int of_thermal_set_trips(struct thermal_zone_device *tz,
- int low, int high)
-{
- struct __thermal_zone *data = tz->devdata;
-
- if (!data->ops || !data->ops->set_trips)
- return -EINVAL;
-
- return data->ops->set_trips(data->sensor_data, low, high);
-}
-
/**
* of_thermal_get_ntrips - function to export number of available trip
* points.
@@ -158,114 +71,6 @@ of_thermal_get_trip_points(struct thermal_zone_device *tz)
}
EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
-/**
- * of_thermal_set_emul_temp - function to set emulated temperature
- *
- * @tz: pointer to a thermal zone
- * @temp: temperature to set
- *
- * This function gives the ability to set emulated value of temperature,
- * which is handy for debugging
- *
- * Return: zero on success, error code otherwise
- */
-static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
- int temp)
-{
- struct __thermal_zone *data = tz->devdata;
-
- if (!data->ops || !data->ops->set_emul_temp)
- return -EINVAL;
-
- return data->ops->set_emul_temp(data->sensor_data, temp);
-}
-
-static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
- enum thermal_trend *trend)
-{
- struct __thermal_zone *data = tz->devdata;
-
- if (!data->ops || !data->ops->get_trend)
- return -EINVAL;
-
- return data->ops->get_trend(data->sensor_data, trip, trend);
-}
-
-static int of_thermal_change_mode(struct thermal_zone_device *tz,
- enum thermal_device_mode mode)
-{
- struct __thermal_zone *data = tz->devdata;
-
- return data->ops->change_mode(data->sensor_data, mode);
-}
-
-static int of_thermal_bind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
-{
- struct __thermal_zone *data = thermal->devdata;
- struct __thermal_bind_params *tbp;
- struct __thermal_cooling_bind_param *tcbp;
- int i, j;
-
- if (!data || IS_ERR(data))
- return -ENODEV;
-
- /* find where to bind */
- for (i = 0; i < data->num_tbps; i++) {
- tbp = data->tbps + i;
-
- for (j = 0; j < tbp->count; j++) {
- tcbp = tbp->tcbp + j;
-
- if (tcbp->cooling_device == cdev->np) {
- int ret;
-
- ret = thermal_zone_bind_cooling_device(thermal,
- tbp->trip_id, cdev,
- tcbp->max,
- tcbp->min,
- tbp->usage);
- if (ret)
- return ret;
- }
- }
- }
-
- return 0;
-}
-
-static int of_thermal_unbind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
-{
- struct __thermal_zone *data = thermal->devdata;
- struct __thermal_bind_params *tbp;
- struct __thermal_cooling_bind_param *tcbp;
- int i, j;
-
- if (!data || IS_ERR(data))
- return -ENODEV;
-
- /* find where to unbind */
- for (i = 0; i < data->num_tbps; i++) {
- tbp = data->tbps + i;
-
- for (j = 0; j < tbp->count; j++) {
- tcbp = tbp->tcbp + j;
-
- if (tcbp->cooling_device == cdev->np) {
- int ret;
-
- ret = thermal_zone_unbind_cooling_device(thermal,
- tbp->trip_id, cdev);
- if (ret)
- return ret;
- }
- }
- }
-
- return 0;
-}
-
static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
enum thermal_trip_type *type)
{
@@ -325,61 +130,6 @@ static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
return -EINVAL;
}
-static struct thermal_zone_device_ops of_thermal_ops = {
- .get_trip_type = of_thermal_get_trip_type,
- .get_trip_temp = of_thermal_get_trip_temp,
- .get_trip_hyst = of_thermal_get_trip_hyst,
- .set_trip_hyst = of_thermal_set_trip_hyst,
- .get_crit_temp = of_thermal_get_crit_temp,
-
- .bind = of_thermal_bind,
- .unbind = of_thermal_unbind,
-};
-
-/*** sensor API ***/
-
-static struct thermal_zone_device *
-thermal_zone_of_add_sensor(struct device_node *zone,
- struct device_node *sensor, void *data,
- const struct thermal_zone_of_device_ops *ops)
-{
- struct thermal_zone_device *tzd;
- struct __thermal_zone *tz;
-
- tzd = thermal_zone_get_zone_by_name(zone->name);
- if (IS_ERR(tzd))
- return ERR_PTR(-EPROBE_DEFER);
-
- tz = tzd->devdata;
-
- if (!ops)
- return ERR_PTR(-EINVAL);
-
- mutex_lock(&tzd->lock);
- tz->ops = ops;
- tz->sensor_data = data;
-
- tzd->ops->get_temp = of_thermal_get_temp;
- tzd->ops->get_trend = of_thermal_get_trend;
-
- /*
- * The thermal zone core will calculate the window if they have set the
- * optional set_trips pointer.
- */
- if (ops->set_trips)
- tzd->ops->set_trips = of_thermal_set_trips;
-
- if (ops->set_emul_temp)
- tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
-
- if (ops->change_mode)
- tzd->ops->change_mode = of_thermal_change_mode;
-
- mutex_unlock(&tzd->lock);
-
- return tzd;
-}
-
/**
* thermal_zone_of_get_sensor_id - get sensor ID from a DT thermal zone
* @tz_np: a valid thermal zone device node.
@@ -424,216 +174,6 @@ int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
}
EXPORT_SYMBOL_GPL(thermal_zone_of_get_sensor_id);
-/**
- * thermal_zone_of_sensor_register - registers a sensor to a DT thermal zone
- * @dev: a valid struct device pointer of a sensor device. Must contain
- * a valid .of_node, for the sensor node.
- * @sensor_id: a sensor identifier, in case the sensor IP has more
- * than one sensors
- * @data: a private pointer (owned by the caller) that will be passed
- * back, when a temperature reading is needed.
- * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp.
- *
- * This function will search the list of thermal zones described in device
- * tree and look for the zone that refer to the sensor device pointed by
- * @dev->of_node as temperature providers. For the zone pointing to the
- * sensor node, the sensor will be added to the DT thermal zone device.
- *
- * The thermal zone temperature is provided by the @get_temp function
- * pointer. When called, it will have the private pointer @data back.
- *
- * The thermal zone temperature trend is provided by the @get_trend function
- * pointer. When called, it will have the private pointer @data back.
- *
- * TODO:
- * 01 - This function must enqueue the new sensor instead of using
- * it as the only source of temperature values.
- *
- * 02 - There must be a way to match the sensor with all thermal zones
- * that refer to it.
- *
- * Return: On success returns a valid struct thermal_zone_device,
- * otherwise, it returns a corresponding ERR_PTR(). Caller must
- * check the return value with help of IS_ERR() helper.
- */
-struct thermal_zone_device *
-thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
- const struct thermal_zone_of_device_ops *ops)
-{
- struct device_node *np, *child, *sensor_np;
- struct thermal_zone_device *tzd = ERR_PTR(-ENODEV);
- static int old_tz_initialized;
- int ret;
-
- if (!old_tz_initialized) {
- ret = of_parse_thermal_zones();
- if (ret)
- return ERR_PTR(ret);
- old_tz_initialized = 1;
- }
-
- np = of_find_node_by_name(NULL, "thermal-zones");
- if (!np)
- return ERR_PTR(-ENODEV);
-
- if (!dev || !dev->of_node) {
- of_node_put(np);
- return ERR_PTR(-ENODEV);
- }
-
- sensor_np = of_node_get(dev->of_node);
-
- for_each_available_child_of_node(np, child) {
- int ret, id;
-
- /* For now, thermal framework supports only 1 sensor per zone */
- ret = thermal_zone_of_get_sensor_id(child, sensor_np, &id);
- if (ret)
- continue;
-
- if (id == sensor_id) {
- tzd = thermal_zone_of_add_sensor(child, sensor_np,
- data, ops);
- if (!IS_ERR(tzd))
- thermal_zone_device_enable(tzd);
-
- of_node_put(child);
- goto exit;
- }
- }
-exit:
- of_node_put(sensor_np);
- of_node_put(np);
-
- return tzd;
-}
-EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
-
-/**
- * thermal_zone_of_sensor_unregister - unregisters a sensor from a DT thermal zone
- * @dev: a valid struct device pointer of a sensor device. Must contain
- * a valid .of_node, for the sensor node.
- * @tzd: a pointer to struct thermal_zone_device where the sensor is registered.
- *
- * This function removes the sensor callbacks and private data from the
- * thermal zone device registered with thermal_zone_of_sensor_register()
- * API. It will also silent the zone by remove the .get_temp() and .get_trend()
- * thermal zone device callbacks.
- *
- * TODO: When the support to several sensors per zone is added, this
- * function must search the sensor list based on @dev parameter.
- *
- */
-void thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tzd)
-{
- struct __thermal_zone *tz;
-
- if (!dev || !tzd || !tzd->devdata)
- return;
-
- tz = tzd->devdata;
-
- /* no __thermal_zone, nothing to be done */
- if (!tz)
- return;
-
- /* stop temperature polling */
- thermal_zone_device_disable(tzd);
-
- mutex_lock(&tzd->lock);
- tzd->ops->get_temp = NULL;
- tzd->ops->get_trend = NULL;
- tzd->ops->set_emul_temp = NULL;
- tzd->ops->change_mode = NULL;
-
- tz->ops = NULL;
- tz->sensor_data = NULL;
- mutex_unlock(&tzd->lock);
-}
-EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister);
-
-static void devm_thermal_zone_of_sensor_release(struct device *dev, void *res)
-{
- thermal_zone_of_sensor_unregister(dev,
- *(struct thermal_zone_device **)res);
-}
-
-static int devm_thermal_zone_of_sensor_match(struct device *dev, void *res,
- void *data)
-{
- struct thermal_zone_device **r = res;
-
- if (WARN_ON(!r || !*r))
- return 0;
-
- return *r == data;
-}
-
-/**
- * devm_thermal_zone_of_sensor_register - Resource managed version of
- * thermal_zone_of_sensor_register()
- * @dev: a valid struct device pointer of a sensor device. Must contain
- * a valid .of_node, for the sensor node.
- * @sensor_id: a sensor identifier, in case the sensor IP has more
- * than one sensors
- * @data: a private pointer (owned by the caller) that will be passed
- * back, when a temperature reading is needed.
- * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp.
- *
- * Refer thermal_zone_of_sensor_register() for more details.
- *
- * Return: On success returns a valid struct thermal_zone_device,
- * otherwise, it returns a corresponding ERR_PTR(). Caller must
- * check the return value with help of IS_ERR() helper.
- * Registered thermal_zone_device device will automatically be
- * released when device is unbounded.
- */
-struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
- struct device *dev, int sensor_id,
- void *data, const struct thermal_zone_of_device_ops *ops)
-{
- struct thermal_zone_device **ptr, *tzd;
-
- ptr = devres_alloc(devm_thermal_zone_of_sensor_release, sizeof(*ptr),
- GFP_KERNEL);
- if (!ptr)
- return ERR_PTR(-ENOMEM);
-
- tzd = thermal_zone_of_sensor_register(dev, sensor_id, data, ops);
- if (IS_ERR(tzd)) {
- devres_free(ptr);
- return tzd;
- }
-
- *ptr = tzd;
- devres_add(dev, ptr);
-
- return tzd;
-}
-EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_register);
-
-/**
- * devm_thermal_zone_of_sensor_unregister - Resource managed version of
- * thermal_zone_of_sensor_unregister().
- * @dev: Device for which which resource was allocated.
- * @tzd: a pointer to struct thermal_zone_device where the sensor is registered.
- *
- * This function removes the sensor callbacks and private data from the
- * thermal zone device registered with devm_thermal_zone_of_sensor_register()
- * API. It will also silent the zone by remove the .get_temp() and .get_trend()
- * thermal zone device callbacks.
- * Normally this function will not need to be called and the resource
- * management code will ensure that the resource is freed.
- */
-void devm_thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tzd)
-{
- WARN_ON(devres_release(dev, devm_thermal_zone_of_sensor_release,
- devm_thermal_zone_of_sensor_match, tzd));
-}
-EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_unregister);
-
/*** functions parsing device tree nodes ***/
static int of_find_trip_id(struct device_node *np, struct device_node *trip)
@@ -665,98 +205,6 @@ static int of_find_trip_id(struct device_node *np, struct device_node *trip)
return i;
}
-/**
- * thermal_of_populate_bind_params - parse and fill cooling map data
- * @np: DT node containing a cooling-map node
- * @__tbp: data structure to be filled with cooling map info
- * @trips: array of thermal zone trip points
- * @ntrips: number of trip points inside trips.
- *
- * This function parses a cooling-map type of node represented by
- * @np parameter and fills the read data into @__tbp data structure.
- * It needs the already parsed array of trip points of the thermal zone
- * in consideration.
- *
- * Return: 0 on success, proper error code otherwise
- */
-static int thermal_of_populate_bind_params(struct device_node *tz_np,
- struct device_node *np,
- struct __thermal_bind_params *__tbp)
-{
- struct of_phandle_args cooling_spec;
- struct __thermal_cooling_bind_param *__tcbp;
- struct device_node *trip;
- int ret, i, count;
- int trip_id;
- u32 prop;
-
- /* Default weight. Usage is optional */
- __tbp->usage = THERMAL_WEIGHT_DEFAULT;
- ret = of_property_read_u32(np, "contribution", &prop);
- if (ret == 0)
- __tbp->usage = prop;
-
- trip = of_parse_phandle(np, "trip", 0);
- if (!trip) {
- pr_err("missing trip property\n");
- return -ENODEV;
- }
-
- trip_id = of_find_trip_id(tz_np, trip);
- if (trip_id < 0) {
- ret = trip_id;
- goto end;
- }
-
- __tbp->trip_id = trip_id;
-
- count = of_count_phandle_with_args(np, "cooling-device",
- "#cooling-cells");
- if (count <= 0) {
- pr_err("Add a cooling_device property with at least one device\n");
- ret = -ENOENT;
- goto end;
- }
-
- __tcbp = kcalloc(count, sizeof(*__tcbp), GFP_KERNEL);
- if (!__tcbp) {
- ret = -ENOMEM;
- goto end;
- }
-
- for (i = 0; i < count; i++) {
- ret = of_parse_phandle_with_args(np, "cooling-device",
- "#cooling-cells", i, &cooling_spec);
- if (ret < 0) {
- pr_err("Invalid cooling-device entry\n");
- goto free_tcbp;
- }
-
- __tcbp[i].cooling_device = cooling_spec.np;
-
- if (cooling_spec.args_count >= 2) { /* at least min and max */
- __tcbp[i].min = cooling_spec.args[0];
- __tcbp[i].max = cooling_spec.args[1];
- } else {
- pr_err("wrong reference to cooling device, missing limits\n");
- }
- }
-
- __tbp->tcbp = __tcbp;
- __tbp->count = count;
-
- goto end;
-
-free_tcbp:
- for (i = i - 1; i >= 0; i--)
- of_node_put(__tcbp[i].cooling_device);
- kfree(__tcbp);
-end:
- of_node_put(trip);
-
- return ret;
-}
-
/*
* It maps 'enum thermal_trip_type' found in include/linux/thermal.h
* into the device tree binding of 'trip', property type.
@@ -873,174 +321,6 @@ static struct thermal_trip *thermal_of_trips_init(struct device_node *np, int *n
return ERR_PTR(ret);
}
-/**
- * thermal_of_build_thermal_zone - parse and fill one thermal zone data
- * @np: DT node containing a thermal zone node
- *
- * This function parses a thermal zone type of node represented by
- * @np parameter and fills the read data into a __thermal_zone data structure
- * and return this pointer.
- *
- * TODO: Missing properties to parse: thermal-sensor-names
- *
- * Return: On success returns a valid struct __thermal_zone,
- * otherwise, it returns a corresponding ERR_PTR(). Caller must
- * check the return value with help of IS_ERR() helper.
- */
-static struct __thermal_zone
-__init *thermal_of_build_thermal_zone(struct device_node *np)
-{
- struct device_node *child = NULL, *gchild;
- struct __thermal_zone *tz;
- int ret, i;
- u32 prop, coef[2];
-
- if (!np) {
- pr_err("no thermal zone np\n");
- return ERR_PTR(-EINVAL);
- }
-
- tz = kzalloc(sizeof(*tz), GFP_KERNEL);
- if (!tz)
- return ERR_PTR(-ENOMEM);
-
- ret = of_property_read_u32(np, "polling-delay-passive", &prop);
- if (ret < 0) {
- pr_err("%pOFn: missing polling-delay-passive property\n", np);
- goto free_tz;
- }
- tz->passive_delay = prop;
-
- ret = of_property_read_u32(np, "polling-delay", &prop);
- if (ret < 0) {
- pr_err("%pOFn: missing polling-delay property\n", np);
- goto free_tz;
- }
- tz->polling_delay = prop;
-
- /*
- * REVIST: for now, the thermal framework supports only
- * one sensor per thermal zone. Thus, we are considering
- * only the first two values as slope and offset.
- */
- ret = of_property_read_u32_array(np, "coefficients", coef, 2);
- if (ret == 0) {
- tz->slope = coef[0];
- tz->offset = coef[1];
- } else {
- tz->slope = 1;
- tz->offset = 0;
- }
-
- tz->trips = thermal_of_trips_init(np, &tz->ntrips);
- if (IS_ERR(tz->trips)) {
- ret = PTR_ERR(tz->trips);
- goto finish;
- }
-
- /* cooling-maps */
- child = of_get_child_by_name(np, "cooling-maps");
-
- /* cooling-maps not provided */
- if (!child)
- goto finish;
-
- tz->num_tbps = of_get_child_count(child);
- if (tz->num_tbps == 0)
- goto finish;
-
- tz->tbps = kcalloc(tz->num_tbps, sizeof(*tz->tbps), GFP_KERNEL);
- if (!tz->tbps) {
- ret = -ENOMEM;
- goto free_trips;
- }
-
- i = 0;
- for_each_child_of_node(child, gchild) {
- ret = thermal_of_populate_bind_params(np, gchild, &tz->tbps[i++]);
- if (ret) {
- of_node_put(gchild);
- goto free_tbps;
- }
- }
-
-finish:
- of_node_put(child);
-
- return tz;
-
-free_tbps:
- for (i = i - 1; i >= 0; i--) {
- struct __thermal_bind_params *tbp = tz->tbps + i;
- int j;
-
- for (j = 0; j < tbp->count; j++)
- of_node_put(tbp->tcbp[j].cooling_device);
-
- kfree(tbp->tcbp);
- }
-
- kfree(tz->tbps);
-free_trips:
- kfree(tz->trips);
-free_tz:
- kfree(tz);
- of_node_put(child);
-
- return ERR_PTR(ret);
-}
-
-static void of_thermal_free_zone(struct __thermal_zone *tz)
-{
- struct __thermal_bind_params *tbp;
- int i, j;
-
- for (i = 0; i < tz->num_tbps; i++) {
- tbp = tz->tbps + i;
-
- for (j = 0; j < tbp->count; j++)
- of_node_put(tbp->tcbp[j].cooling_device);
-
- kfree(tbp->tcbp);
- }
-
- kfree(tz->tbps);
- kfree(tz->trips);
- kfree(tz);
-}
-
-/**
- * of_thermal_destroy_zones - remove all zones parsed and allocated resources
- *
- * Finds all zones parsed and added to the thermal framework and remove them
- * from the system, together with their resources.
- *
- */
-static __init void of_thermal_destroy_zones(void)
-{
- struct device_node *np, *child;
-
- np = of_find_node_by_name(NULL, "thermal-zones");
- if (!np) {
- pr_debug("unable to find thermal zones\n");
- return;
- }
-
- for_each_available_child_of_node(np, child) {
- struct thermal_zone_device *zone;
-
- zone = thermal_zone_get_zone_by_name(child->name);
- if (IS_ERR(zone))
- continue;
-
- thermal_zone_device_unregister(zone);
- kfree(zone->tzp);
- kfree(zone->ops);
- of_thermal_free_zone(zone->devdata);
- }
- of_node_put(np);
-}
-
static struct device_node *of_thermal_zone_find(struct device_node *sensor, int id)
{
struct device_node *np, *tz;
@@ -1486,95 +766,7 @@ EXPORT_SYMBOL_GPL(devm_thermal_of_zone_register);
*/
void devm_thermal_of_zone_unregister(struct device *dev, struct thermal_zone_device *tz)
{
- WARN_ON(devres_release(dev, devm_thermal_zone_of_sensor_release,
+ WARN_ON(devres_release(dev, devm_thermal_of_zone_release,
devm_thermal_of_zone_match, tz));
}
EXPORT_SYMBOL_GPL(devm_thermal_of_zone_unregister);
-
-/**
- * of_parse_thermal_zones - parse device tree thermal data
- *
- * Initialization function that can be called by machine initialization
- * code to parse thermal data and populate the thermal framework
- * with hardware thermal zones info. This function only parses thermal zones.
- * Cooling devices and sensor devices nodes are supposed to be parsed
- * by their respective drivers.
- *
- * Return: 0 on success, proper error code otherwise
- *
- */
-int of_parse_thermal_zones(void)
-{
- struct device_node *np, *child;
- struct __thermal_zone *tz;
- struct thermal_zone_device_ops *ops;
-
- np = of_find_node_by_name(NULL, "thermal-zones");
- if (!np) {
- pr_debug("unable to find thermal zones\n");
- return 0; /* Run successfully on systems without thermal DT */
- }
-
- for_each_available_child_of_node(np, child) {
- struct thermal_zone_device *zone;
- struct thermal_zone_params *tzp;
- int i, mask = 0;
- u32 prop;
-
- tz = thermal_of_build_thermal_zone(child);
- if (IS_ERR(tz)) {
- pr_err("failed to build thermal zone %pOFn: %ld\n",
- child,
- PTR_ERR(tz));
- continue;
- }
-
- ops = kmemdup(&of_thermal_ops, sizeof(*ops), GFP_KERNEL);
- if (!ops)
- goto exit_free;
-
- tzp = kzalloc(sizeof(*tzp), GFP_KERNEL);
- if (!tzp) {
- kfree(ops);
- goto exit_free;
- }
-
- /* No hwmon because there might be hwmon drivers registering */
- tzp->no_hwmon = true;
-
- if (!of_property_read_u32(child, "sustainable-power", &prop))
- tzp->sustainable_power = prop;
-
- for (i = 0; i < tz->ntrips; i++)
- mask |= 1 << i;
-
- /* these two are left for temperature drivers to use */
- tzp->slope = tz->slope;
- tzp->offset = tz->offset;
-
- zone = thermal_zone_device_register_with_trips(child->name, tz->trips, tz->ntrips,
- mask, tz, ops, tzp, tz->passive_delay,
- tz->polling_delay);
- if (IS_ERR(zone)) {
- pr_err("Failed to build %pOFn zone %ld\n", child,
- PTR_ERR(zone));
- kfree(tzp);
- kfree(ops);
- of_thermal_free_zone(tz);
- /* attempting to build remaining zones still */
- }
- }
- of_node_put(np);
-
- return 0;
-
-exit_free:
- of_node_put(child);
- of_node_put(np);
- of_thermal_free_zone(tz);
-
- /* no memory available, so free what we have built */
- of_thermal_destroy_zones();
-
- return -ENOMEM;
-}
@@ -296,33 +296,6 @@ struct thermal_zone_params {
int offset;
};
-/**
- * struct thermal_zone_of_device_ops - callbacks for handling DT based zones
- *
- * Mandatory:
- * @get_temp: a pointer to a function that reads the sensor temperature.
- *
- * Optional:
- * @get_trend: a pointer to a function that reads the sensor temperature trend.
- * @set_trips: a pointer to a function that sets a temperature window. When
- * this window is left the driver must inform the thermal core via
- * thermal_zone_device_update.
- * @set_emul_temp: a pointer to a function that sets sensor emulated
- * temperature.
- * @set_trip_temp: a pointer to a function that sets the trip temperature on
- * hardware.
- * @change_mode: a pointer to a function that notifies the thermal zone
- * mode change.
- */
-struct thermal_zone_of_device_ops {
- int (*get_temp)(void *, int *);
- int (*get_trend)(void *, int, enum thermal_trend *);
- int (*set_trips)(void *, int, int);
- int (*set_emul_temp)(void *, int);
- int (*set_trip_temp)(void *, int, int);
- int (*change_mode) (void *, enum thermal_device_mode);
-};
-
/* Function declarations */
#ifdef CONFIG_THERMAL_OF
struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
@@ -335,61 +308,41 @@ void thermal_of_zone_unregister(struct thermal_zone_device *tz);
void devm_thermal_of_zone_unregister(struct device *dev, struct thermal_zone_device *tz);
+void thermal_of_zone_unregister(struct thermal_zone_device *tz);
+
int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
struct device_node *sensor_np,
u32 *id);
-struct thermal_zone_device *
-thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
- const struct thermal_zone_of_device_ops *ops);
-void thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tz);
-struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
- struct device *dev, int id, void *data,
- const struct thermal_zone_of_device_ops *ops);
-void devm_thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tz);
#else
-
-static inline int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
- struct device_node *sensor_np,
- u32 *id)
-{
- return -ENOENT;
-}
-static inline struct thermal_zone_device *
-thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
- const struct thermal_zone_of_device_ops *ops)
-{
- return ERR_PTR(-ENODEV);
-}
-
static inline
-void thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tz)
+struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
+ const struct thermal_zone_device_ops *ops)
{
+ return ERR_PTR(-ENOTSUPP);
}
-static inline struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
- struct device *dev, int id, void *data,
- const struct thermal_zone_of_device_ops *ops)
+static inline
+struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data,
+ const struct thermal_zone_device_ops *ops)
{
- return ERR_PTR(-ENODEV);
+ return ERR_PTR(-ENOTSUPP);
}
static inline void thermal_of_zone_unregister(struct thermal_zone_device *tz)
{
}
-static inline void devm_thermal_of_zone_unregister(struct device *dev, struct thermal_zone_device *tz)
+static inline void devm_thermal_of_zone_unregister(struct device *dev,
+ struct thermal_zone_device *tz)
{
}
-static inline
-void devm_thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tz)
+static inline int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
+ struct device_node *sensor_np,
+ u32 *id)
{
+ return -ENOENT;
}
-
#endif
#ifdef CONFIG_THERMAL
All the drivers are converted to the new OF API, remove the old OF code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> --- drivers/thermal/thermal_core.h | 2 - drivers/thermal/thermal_of.c | 810 +-------------------------------- include/linux/thermal.h | 77 +--- 3 files changed, 16 insertions(+), 873 deletions(-)