[v2,05/11] virt: gunyah: Add sysfs nodes

Add /sys/hypervisor support when detecting that Linux is running in a
Gunyah environment. Export the version of Gunyah which is reported via
the hyp_identify hypercall.

Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 .../ABI/testing/sysfs-hypervisor-gunyah       |  37 +++++
 MAINTAINERS                                   |   2 +
 arch/arm64/include/asm/gunyah.h               |   4 +
 drivers/virt/Kconfig                          |   1 +
 drivers/virt/Makefile                         |   1 +
 drivers/virt/gunyah/Kconfig                   |  13 ++
 drivers/virt/gunyah/Makefile                  |   4 +
 drivers/virt/gunyah/sysfs.c                   | 139 ++++++++++++++++++
 8 files changed, 201 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-hypervisor-gunyah
 create mode 100644 drivers/virt/gunyah/Kconfig
 create mode 100644 drivers/virt/gunyah/Makefile
 create mode 100644 drivers/virt/gunyah/sysfs.c

On 02/08/2022 00:12, Elliot Berman wrote:
> Add /sys/hypervisor support when detecting that Linux is running in a
> Gunyah environment. Export the version of Gunyah which is reported via
> the hyp_identify hypercall.
> 
> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
> ---
>   .../ABI/testing/sysfs-hypervisor-gunyah       |  37 +++++
>   MAINTAINERS                                   |   2 +
>   arch/arm64/include/asm/gunyah.h               |   4 +
>   drivers/virt/Kconfig                          |   1 +
>   drivers/virt/Makefile                         |   1 +
>   drivers/virt/gunyah/Kconfig                   |  13 ++
>   drivers/virt/gunyah/Makefile                  |   4 +
>   drivers/virt/gunyah/sysfs.c                   | 139 ++++++++++++++++++
>   8 files changed, 201 insertions(+)
>   create mode 100644 Documentation/ABI/testing/sysfs-hypervisor-gunyah
>   create mode 100644 drivers/virt/gunyah/Kconfig
>   create mode 100644 drivers/virt/gunyah/Makefile
>   create mode 100644 drivers/virt/gunyah/sysfs.c
> 
> diff --git a/Documentation/ABI/testing/sysfs-hypervisor-gunyah b/Documentation/ABI/testing/sysfs-hypervisor-gunyah
> new file mode 100644
> index 000000000000..41bce1965c91
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-hypervisor-gunyah
> @@ -0,0 +1,37 @@
> +What:		/sys/hypervisor/type

These whole set of entries doesn't look right. You are defining 
gunyah-specific entries in the generic /sys/hypervisor directory. Other 
hypervisors will have their own set of ABI/sysfs files/etc/.

I would suggest using /sys/hypervisor/gunyah as a base dir. Then you can 
define any gunyah-specific file in it without caring if it applies to 
other hypervisors or not.

> +Date:		August 2022
> +KernelVersion:	5.20
> +Contact:	linux-arm-msm@vger.kernel.org
> +Description:	If running under Gunyah:
> +		Type of hypervisor:
> +		"gunyah": Gunyah hypervisor

And this will be gone if you adopt /sys/hypervisor/gunyah approach

> +
> +What:		/sys/hypervisor/features
> +Date:		August 2022
> +KernelVersion:	5.20
> +Contact:	linux-arm-msm@vger.kernel.org
> +Description:	If running under Gunyah:
> +		Space separated list of features supported by Linux and Gunyah:
> +		"cspace": Gunyah devices
> +		"doorbell": Sending/receiving virtual interrupts via Gunyah doorbells
> +		"message-queue": Sending/receiving messages via Gunyah message queues
> +		"vic": Interrupt lending
> +		"vpm": Virtual platform management
> +		"vcpu": Virtual CPU management
> +		"memextent": Memory lending/management
> +		"trace": Gunyah hypervisor tracing
> +
> +
> +What:		/sys/hypervisor/version/api
> +Date:		August 2022
> +KernelVersion:	5.20
> +Contact:	linux-arm-msm@vger.kernel.org
> +Description:	If running under Gunyah:
> +		The Gunyah API version.
> +
> +What:		/sys/hypervisor/version/variant
> +Date:		August 2022
> +KernelVersion:	5.20
> +Contact:	linux-arm-msm@vger.kernel.org
> +Description:	If running under Gunyah:
> +		The Gunyah variant (build) version.

If this is a build version, please call it a build version rather than 
variant.

> \ No newline at end of file
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2e4f1d9ed47b..e63c51ee1a2a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8741,9 +8741,11 @@ M:	Elliot Berman <quic_eberman@quicinc.com>
>   M:	Murali Nalajala <quic_mnalajal@quicinc.com>
>   L:	linux-arm-msm@vger.kernel.org
>   S:	Maintained
> +F:	Documentation/ABI/testing/sysfs-hypervisor-gunyah
>   F:	Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
>   F:	Documentation/virt/gunyah/
>   F:	arch/arm64/include/asm/gunyah.h
> +F:	drivers/virt/gunyah/
>   F:	include/linux/gunyah.h
>   
>   HABANALABS PCI DRIVER
> diff --git a/arch/arm64/include/asm/gunyah.h b/arch/arm64/include/asm/gunyah.h
> index 4820e9389f40..3aee35009910 100644
> --- a/arch/arm64/include/asm/gunyah.h
> +++ b/arch/arm64/include/asm/gunyah.h
> @@ -19,11 +19,15 @@
>   						   (GH_CALL_TYPE_SERVICE << GH_CALL_TYPE_SHIFT) \
>   							| ((fn) & GH_CALL_FUNCTION_NUM_MASK))
>   
> +#define GH_HYPERCALL_CALL_UID			GH_SERVICE(0x3f01)
> +
>   #define GH_HYPERCALL(fn)	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
>   						   ARM_SMCCC_OWNER_VENDOR_HYP, \
>   						   (GH_CALL_TYPE_HYPERCALL << GH_CALL_TYPE_SHIFT) \
>   							| ((fn) & GH_CALL_FUNCTION_NUM_MASK))
>   
> +#define GH_HYPERCALL_HYP_IDENTIFY		GH_HYPERCALL(0x0000)
> +
>   #define ___gh_count_args(_0, _1, _2, _3, _4, _5, _6, _7, _8, x, ...) x
>   
>   #define __gh_count_args(...)						\
> diff --git a/drivers/virt/Kconfig b/drivers/virt/Kconfig
> index 87ef258cec64..259dc2be6cad 100644
> --- a/drivers/virt/Kconfig
> +++ b/drivers/virt/Kconfig
> @@ -52,4 +52,5 @@ source "drivers/virt/coco/efi_secret/Kconfig"
>   
>   source "drivers/virt/coco/sev-guest/Kconfig"
>   
> +source "drivers/virt/gunyah/Kconfig"
>   endif
> diff --git a/drivers/virt/Makefile b/drivers/virt/Makefile
> index 093674e05c40..ec4fdfa8eef1 100644
> --- a/drivers/virt/Makefile
> +++ b/drivers/virt/Makefile
> @@ -6,6 +6,7 @@
>   obj-$(CONFIG_FSL_HV_MANAGER)	+= fsl_hypervisor.o
>   obj-$(CONFIG_VMGENID)		+= vmgenid.o
>   obj-y				+= vboxguest/
> +obj-$(CONFIG_GUNYAH)		+= gunyah/
>   
>   obj-$(CONFIG_NITRO_ENCLAVES)	+= nitro_enclaves/
>   obj-$(CONFIG_ACRN_HSM)		+= acrn/
> diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
> new file mode 100644
> index 000000000000..1e493017885e
> --- /dev/null
> +++ b/drivers/virt/gunyah/Kconfig
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config GUNYAH
> +	tristate "Gunyah Virtualization drivers"
> +	depends on ARM64
> +	select SYS_HYPERVISOR
> +	help
> +	  The Gunyah drivers are the helper interfaces that runs in a guest VM
> +	  such as basic inter-VM IPC and signaling mechanisms and higher level
> +	  services such as memory/device sharing, IRQ sharing, and so on.
> +
> +	  Say Y here to enable the drivers needed to interact in a Gunyah
> +	  virtual environment.
> diff --git a/drivers/virt/gunyah/Makefile b/drivers/virt/gunyah/Makefile
> new file mode 100644
> index 000000000000..0aa086f9149f
> --- /dev/null
> +++ b/drivers/virt/gunyah/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +gunyah-y += sysfs.o
> +obj-$(CONFIG_GUNYAH) += gunyah.o
> \ No newline at end of file
> diff --git a/drivers/virt/gunyah/sysfs.c b/drivers/virt/gunyah/sysfs.c
> new file mode 100644
> index 000000000000..253433a939cf
> --- /dev/null
> +++ b/drivers/virt/gunyah/sysfs.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt) "gunyah: " fmt
> +
> +#include <linux/kobject.h>
> +#include <linux/gunyah.h>
> +#include <linux/module.h>
> +#include <linux/printk.h>
> +#include <linux/init.h>
> +#include <linux/of.h>
> +
> +#define QC_HYP_UID0 0x19bd54bd
> +#define QC_HYP_UID1 0x0b37571b
> +#define QC_HYP_UID2 0x946f609b
> +#define QC_HYP_UID3 0x54539de6
> +
> +#define GUNYAH_UID0 0x673d5f14
> +#define GUNYAH_UID1 0x9265ce36
> +#define GUNYAH_UID2 0xa4535fdb
> +#define GUNYAH_UID3 0xc1d58fcd
> +
> +#define gh_uid_matches(prefix, uid)	\
> +	((uid)[0] == prefix ## _UID0 && (uid)[1] == prefix ## _UID1 && \
> +	 (uid)[2] == prefix ## _UID2 && (uid)[3] == prefix ## _UID3)
> +
> +#define GH_API_INFO_API_VERSION(x)	(((x) >> 0) & 0x3fff)
> +#define GH_API_INFO_BIG_ENDIAN(x)	(((x) >> 14) & 1)
> +#define GH_API_INFO_IS_64BIT(x)		(((x) >> 15) & 1)
> +#define GH_API_INFO_VARIANT(x)		(((x) >> 56) & 0xff)
> +
> +#define GH_IDENTIFY_PARTITION_CSPACE(flags)	(((flags)[0] >> 0) & 1)
> +#define GH_IDENTIFY_DOORBELL(flags)		(((flags)[0] >> 1) & 1)
> +#define GH_IDENTIFY_MSGQUEUE(flags)		(((flags)[0] >> 2) & 1)
> +#define GH_IDENTIFY_VIC(flags)			(((flags)[0] >> 3) & 1)
> +#define GH_IDENTIFY_VPM(flags)			(((flags)[0] >> 4) & 1)
> +#define GH_IDENTIFY_VCPU(flags)			(((flags)[0] >> 5) & 1)
> +#define GH_IDENTIFY_MEMEXTENT(flags)		(((flags)[0] >> 6) & 1)
> +#define GH_IDENTIFY_TRACE_CTRL(flags)		(((flags)[0] >> 7) & 1)
> +
> +struct gh_hypercall_hyp_identify_resp {
> +	u64 api_info;
> +	u64 flags[3];
> +};
> +
> +static struct gh_hypercall_hyp_identify_resp gunyah_api;
> +
> +static ssize_t type_show(struct kobject *kobj, struct kobj_attribute *attr, char *buffer)
> +{
> +	return sysfs_emit(buffer, "gunyah\n");
> +}
> +static struct kobj_attribute type_attr = __ATTR_RO(type);
> +
> +static ssize_t api_show(struct kobject *kobj, struct kobj_attribute *attr, char *buffer)
> +{
> +	return sysfs_emit(buffer, "%d\n", (int)GH_API_INFO_API_VERSION(gunyah_api.api_info));
> +}
> +static struct kobj_attribute api_attr = __ATTR_RO(api);
> +
> +static ssize_t variant_show(struct kobject *kobj, struct kobj_attribute *attr, char *buffer)
> +{
> +	return sysfs_emit(buffer, "%d\n", (int)GH_API_INFO_VARIANT(gunyah_api.api_info));
> +}
> +static struct kobj_attribute variant_attr = __ATTR_RO(variant);
> +
> +static ssize_t features_show(struct kobject *kobj, struct kobj_attribute *attr, char *buffer)
> +{
> +	return sysfs_emit(buffer, "\n");

empty features? oook. At least it deserves a comment here, if you plan 
to add features later in these series. But strictly speaking it might be 
better to define the features ABI once you start populating it.

> +}
> +static struct kobj_attribute features_attr = __ATTR_RO(features);
> +
> +static struct attribute *version_attrs[] = {
> +	&api_attr.attr,
> +	&variant_attr.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group version_group = {
> +	.name = "version",
> +	.attrs = version_attrs,
> +};
> +
> +static int __init gh_sysfs_register(void)
> +{
> +	int ret;
> +
> +	ret = sysfs_create_file(hypervisor_kobj, &type_attr.attr);
> +	if (ret)
> +		return ret;
> +
> +	ret = sysfs_create_group(hypervisor_kobj, &version_group);
> +	if (ret)
> +		return ret;
> +
> +	return sysfs_create_file(hypervisor_kobj, &features_attr.attr);

error path?


> +}
> +
> +static void gh_sysfs_unregister(void)
> +{
> +	sysfs_remove_file(hypervisor_kobj, &type_attr.attr);
> +	sysfs_remove_group(hypervisor_kobj, &version_group);

Please unwind in a backwards manner. Also one sysfs_remove_ is missing.

> +}
> +
> +static int __init gunyah_init(void)
> +{
> +	unsigned long uid[4];
> +
> +	arch_gh_hypercall(GH_HYPERCALL_CALL_UID, 0, uid[0], uid[1], uid[2], uid[3]);
> +
> +	if (!(gh_uid_matches(GUNYAH, uid) || gh_uid_matches(QC_HYP, uid)))
> +		return 0;

if (!gh_uid_matched(GUNYAH, uid) &&
     !gh_uid_matches(QC_HYP, uid))
     return -ENODEV;


BTW: what is the difference between GUNYAH and QC_HYP here?

> +
> +	arch_gh_hypercall(GH_HYPERCALL_HYP_IDENTIFY, 0, gunyah_api.api_info,
> +		gunyah_api.flags[0], gunyah_api.flags[1], gunyah_api.flags[2]);
> +
> +	if (GH_API_INFO_API_VERSION(gunyah_api.api_info) != 1) {
> +		pr_warn("Unrecognized gunyah version: %llu. Currently supported: 1\n",
> +			GH_API_INFO_API_VERSION(gunyah_api.api_info));
> +		return 0;
> +	}
> +
> +	pr_notice("Running under Gunyah hypervisor v%lld/%llx\n",
> +		  GH_API_INFO_API_VERSION(gunyah_api.api_info),
> +		  GH_API_INFO_VARIANT(gunyah_api.api_info));
> +
> +	return gh_sysfs_register();
> +}
> +module_init(gunyah_init);
> +
> +static void __exit gunyah_exit(void)
> +{
> +	gh_sysfs_unregister();
> +}
> +module_exit(gunyah_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Gunyah Hypervisor Driver");

Sysfs driver?