| Message ID | 20220728143427.13617-4-Sergey.Semin@baikalelectronics.ru |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: dwc: Add generic resources and Baikal-T1 support | expand |
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index 3e992b653d12..627a5d6625ba 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -17,6 +17,21 @@ description: select: false properties: + phys: + description: + There can be up to the number of possible lanes PHYs specified. + Obviously each specified PHY is supposed to be able to work in the + PCIe mode with a speed implied by the DWC PCIe controller it is + attached to. + minItems: 1 + maxItems: 16 + + phy-names: + minItems: 1 + maxItems: 16 + items: + pattern: '^pcie([0-9]+|-?phy[0-9]*)?$' + reset-gpio: deprecated: true description: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index 7d05dcba419b..dcd521aed213 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -52,4 +52,7 @@ examples: <0xdfc01000 0x0001000>, /* IP registers 2 */ <0xd0000000 0x2000000>; /* Configuration space */ reg-names = "dbi", "dbi2", "addr_space"; + + phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>; + phy-names = "pcie0", "pcie1", "pcie2", "pcie3"; }; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 2810e9b5cc8d..4a5c8b933b52 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -70,5 +70,8 @@ examples: reset-gpios = <&port0 0 1>; + phys = <&pcie_phy>; + phy-names = "pcie"; + num-lanes = <1>; };
It's normal to have the DW PCIe RP/EP DT-nodes equipped with the explicit PHY phandle references. There can be up to 16 PHYs attach in accordance with the maximum number of supported PCIe lanes. Let's extend the common DW PCIe controller schema with the 'phys' and 'phy-names' properties definition. The PHY names are defined with the regexp pattern '^pcie([0-9]+|-?phy[0-9]*)?$' so to match the names currently supported by the DW PCIe platform drivers ("pcie": meson; "pciephy": qcom, imx6; "pcie-phy": uniphier, rockchip, spear13xx; "pcie": intel-gw; "pcie-phy%d": keystone, dra7xx; "pcie": histb, etc). Though the "pcie%d" format would the most preferable in this case. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@baikalelectronics.ru/ by the Rob' request. (@Rob) --- .../bindings/pci/snps,dw-pcie-common.yaml | 15 +++++++++++++++ .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 3 +++ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 3 +++ 3 files changed, 21 insertions(+)