new file mode 100644
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+ - Jingoo Han <jingoohan1@gmail.com>
+ - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+ Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+ properties.
+
+select: false
+
+properties:
+ reset-gpio:
+ deprecated: true
+ description:
+ Reference to the GPIO-controlled PERST# signal. It is used to reset all
+ the peripheral devices available on the PCIe bus.
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Reference to the GPIO-controlled PERST# signal. It is used to reset all
+ the peripheral devices available on the PCIe bus.
+ maxItems: 1
+
+ num-lanes:
+ description:
+ Number of PCIe link lanes to use. Can be omitted should the already
+ brought up link is supposed to be preserved.
+ maximum: 16
+
+ num-ob-windows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of outbound address translation windows. This parameter can be
+ auto-detected based on the iATU memory writability. So there is no
+ point in having a dedicated DT-property for it.
+ maximum: 256
+
+ num-ib-windows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of inbound address translation windows. In the same way as
+ for the outbound AT windows, this parameter can be auto-detected based
+ on the iATU memory writability. There is no point having a dedicated
+ DT-property for it either.
+ maximum: 256
+
+ num-viewport:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of outbound view ports configured in hardware. It's the same as
+ the number of outbound AT windows.
+ maximum: 256
+
+ snps,enable-cdm-check:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable automatic checking of CDM (Configuration Dependent Module)
+ registers for data corruption. CDM registers include standard PCIe
+ configuration space registers, Port Logic registers, DMA and iATU
+ registers. This feature has been available since DWC PCIe v4.80a.
+
+additionalProperties: true
+
+...
@@ -15,6 +15,7 @@ description: |
allOf:
- $ref: /schemas/pci/pci-ep.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
properties:
compatible:
@@ -36,36 +37,6 @@ properties:
items:
enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
- reset-gpio:
- description: GPIO pin number of PERST# signal
- maxItems: 1
- deprecated: true
-
- reset-gpios:
- description: GPIO controlled connection to PERST# signal
- maxItems: 1
-
- snps,enable-cdm-check:
- type: boolean
- description: |
- This is a boolean property and if present enables
- automatic checking of CDM (Configuration Dependent Module) registers
- for data corruption. CDM registers include standard PCIe configuration
- space registers, Port Logic registers, DMA and iATU (internal Address
- Translation Unit) registers.
-
- num-ib-windows:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 256
- description: number of inbound address translation windows
- deprecated: true
-
- num-ob-windows:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 256
- description: number of outbound address translation windows
- deprecated: true
-
required:
- reg
- reg-names
@@ -15,6 +15,7 @@ description: |
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
properties:
compatible:
@@ -37,44 +38,12 @@ properties:
enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
ulreg, smu, mpu, apb, phy ]
- num-lanes:
- description: |
- number of lanes to use (this property should be specified unless
- the link is brought already up in firmware)
- maximum: 16
-
- reset-gpio:
- description: GPIO pin number of PERST# signal
- maxItems: 1
- deprecated: true
-
- reset-gpios:
- description: GPIO controlled connection to PERST# signal
- maxItems: 1
-
interrupts: true
interrupt-names: true
clocks: true
- snps,enable-cdm-check:
- type: boolean
- description: |
- This is a boolean property and if present enables
- automatic checking of CDM (Configuration Dependent Module) registers
- for data corruption. CDM registers include standard PCIe configuration
- space registers, Port Logic registers, DMA and iATU (internal Address
- Translation Unit) registers.
-
- num-viewport:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 256
- description: |
- number of view ports configured in hardware. If a platform
- does not specify it, the driver autodetects it.
- deprecated: true
-
additionalProperties: true
required:
Currently both DW PCIe Root Port and End-point DT bindings are defined as separate schemas. Carefully looking at them, at the hardware reference manuals and seeing there is a generic part of the driver used by the both RP and EP drivers we can greatly simplify the DW PCIe controller bindings by moving some of the properties into the common DT schema. It concerns the PERST GPIO control, number of lanes, number of iATU windows and CDM check properties. They will be defined in the snps,dw-pcie-common.yaml schema which will be referenced in the DW PCIe Root Port and End-point DT bindings in order to evaluate the common for both of these controllers properties. The rest of properties like reg{,-names}, clock{s,-names}, reset{s,-names}, etc will be consolidate there in one of the next commits. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@baikalelectronics.ru/ by the Rob' request. (@Rob) --- .../bindings/pci/snps,dw-pcie-common.yaml | 76 +++++++++++++++++++ .../bindings/pci/snps,dw-pcie-ep.yaml | 31 +------- .../devicetree/bindings/pci/snps,dw-pcie.yaml | 33 +------- 3 files changed, 78 insertions(+), 62 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml