diff mbox series

[v8,5/6] arm64: dts: mt8195: Add efuse node to mt8195

Message ID 20220726135506.485108-6-bchihi@baylibre.com
State New
Headers show
Series Add LVTS architecture thermal | expand

Commit Message

Balsam CHIHI July 26, 2022, 1:55 p.m. UTC
This adds the efuse node. This will be required by the thermal driver
to get the calibration data.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Balsam CHIHI Aug. 1, 2022, 12:33 p.m. UTC | #1
On Fri, Jul 29, 2022 at 10:14 PM Nícolas F. R. A. Prado
<nfraprado@collabora.com> wrote:
>
> On Tue, Jul 26, 2022 at 03:55:05PM +0200, Balsam CHIHI wrote:
> > This adds the efuse node. This will be required by the thermal driver
> > to get the calibration data.
> >
> > Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> > Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8195.dtsi | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > index 0ff34edcf8c8..4fbf24b5d202 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > @@ -1236,6 +1236,22 @@ nor_flash: spi@1132c000 {
> >                       status = "disabled";
> >               };
> >
> > +             efuse: efuse@11c10000 {
> > +                     compatible = "mediatek,efuse";
> > +                     reg = <0 0x11c10000 0 0x1000>;
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +                     lvts_efuse_data1: lvts1-calib@1bc {
> > +                             reg = <0x1bc 0x14>;
> > +                     };
> > +                     lvts_efuse_data2: lvts2-calib@1d0 {
> > +                             reg = <0x1d0 0x38>;
> > +                     };
> > +                     svs_calibration: calib@580 {
> > +                             reg = <0x580 0x64>;
> > +                     };
> > +             };
> > +
>
> This commit doesn't apply, there's already an efuse node on mt8195.dtsi. Please
> rebase.
>
> Thanks,
> Nícolas

Hello Nícolas,

Thank you so much for the review.
I rebased on top of the latest kernel version "linux-5.19.0" but I
can't find efuse node on mt8195.dtsi.
But, this node is indeed present on mt8192.dtsi.

Best regards,
Balsam
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 0ff34edcf8c8..4fbf24b5d202 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1236,6 +1236,22 @@  nor_flash: spi@1132c000 {
 			status = "disabled";
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			lvts_efuse_data1: lvts1-calib@1bc {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_efuse_data2: lvts2-calib@1d0 {
+				reg = <0x1d0 0x38>;
+			};
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
+		};
+
 		u3phy2: t-phy@11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;