| Message ID | 20220726130523.2985735-1-m.felsch@pengutronix.de |
|---|---|
| State | Accepted |
| Commit | 5694eed98cca5c164ebb5b831b65b4c9eee4b2d5 |
| Headers | show |
| Series | [1/4] ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node | expand |
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 095c9143d99a..7001c8c5e19b 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -270,7 +270,19 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + }; + }; }; &i2c_intern {
Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios property. The reset-assert-us value is taken from the existing logic since the fec driver will add an 1ms assert delay per default if phy-reset-gpios is used and phy-reset-duration is not specified. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)