@@ -355,9 +355,9 @@ static irqreturn_t adc_tm5_gen2_isr(int irq, void *data)
return IRQ_HANDLED;
}
-static int adc_tm5_get_temp(void *data, int *temp)
+static int adc_tm5_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct adc_tm5_channel *channel = data;
+ struct adc_tm5_channel *channel = tz->devdata;
int ret;
if (!channel || !channel->iio)
@@ -637,9 +637,9 @@ static int adc_tm5_gen2_configure(struct adc_tm5_channel *channel, int low, int
return ret;
}
-static int adc_tm5_set_trips(void *data, int low, int high)
+static int adc_tm5_set_trips(struct thermal_zone_device *tz, int low, int high)
{
- struct adc_tm5_channel *channel = data;
+ struct adc_tm5_channel *channel = tz->devdata;
struct adc_tm5_chip *chip;
int ret;
@@ -658,7 +658,7 @@ static int adc_tm5_set_trips(void *data, int low, int high)
return ret;
}
-static struct thermal_zone_of_device_ops adc_tm5_thermal_ops = {
+static const struct thermal_zone_device_ops adc_tm5_thermal_ops = {
.get_temp = adc_tm5_get_temp,
.set_trips = adc_tm5_set_trips,
};
@@ -670,11 +670,10 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
for (i = 0; i < adc_tm->nchannels; i++) {
adc_tm->channels[i].chip = adc_tm;
-
- tzd = devm_thermal_zone_of_sensor_register(adc_tm->dev,
- adc_tm->channels[i].channel,
- &adc_tm->channels[i],
- &adc_tm5_thermal_ops);
+ tzd = devm_thermal_of_zone_register(adc_tm->dev,
+ adc_tm->channels[i].channel,
+ &adc_tm->channels[i],
+ &adc_tm5_thermal_ops);
if (IS_ERR(tzd)) {
if (PTR_ERR(tzd) == -ENODEV) {
dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
@@ -185,9 +185,9 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
return 0;
}
-static int qpnp_tm_get_temp(void *data, int *temp)
+static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct qpnp_tm_chip *chip = data;
+ struct qpnp_tm_chip *chip = tz->devdata;
int ret, mili_celsius;
if (!temp)
@@ -262,9 +262,9 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
}
-static int qpnp_tm_set_trip_temp(void *data, int trip, int temp)
+static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
{
- struct qpnp_tm_chip *chip = data;
+ struct qpnp_tm_chip *chip = tz->devdata;
const struct thermal_trip *trip_points;
int ret;
@@ -282,7 +282,7 @@ static int qpnp_tm_set_trip_temp(void *data, int trip, int temp)
return ret;
}
-static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = {
+static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = {
.get_temp = qpnp_tm_get_temp,
.set_trip_temp = qpnp_tm_set_trip_temp,
};
@@ -445,7 +445,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
* read the trip points. get_temp() returns the default temperature
* before the hardware initialization is completed.
*/
- chip->tz_dev = devm_thermal_zone_of_sensor_register(
+ chip->tz_dev = devm_thermal_of_zone_register(
&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
if (IS_ERR(chip->tz_dev)) {
dev_err(&pdev->dev, "failed to register sensor\n");
@@ -532,9 +532,9 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
return IRQ_HANDLED;
}
-static int tsens_set_trips(void *_sensor, int low, int high)
+static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
{
- struct tsens_sensor *s = _sensor;
+ struct tsens_sensor *s = tz->devdata;
struct tsens_priv *priv = s->priv;
struct device *dev = priv->dev;
struct tsens_irq_data d;
@@ -925,17 +925,17 @@ int __init init_common(struct tsens_priv *priv)
return ret;
}
-static int tsens_get_temp(void *data, int *temp)
+static int tsens_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct tsens_sensor *s = data;
+ struct tsens_sensor *s = tz->devdata;
struct tsens_priv *priv = s->priv;
return priv->ops->get_temp(s, temp);
}
-static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
+static int tsens_get_trend(struct thermal_zone_device *tz, int trip, enum thermal_trend *trend)
{
- struct tsens_sensor *s = data;
+ struct tsens_sensor *s = tz->devdata;
struct tsens_priv *priv = s->priv;
if (priv->ops->get_trend)
@@ -1002,7 +1002,7 @@ static const struct of_device_id tsens_table[] = {
};
MODULE_DEVICE_TABLE(of, tsens_table);
-static const struct thermal_zone_of_device_ops tsens_of_ops = {
+static const struct thermal_zone_device_ops tsens_of_ops = {
.get_temp = tsens_get_temp,
.get_trend = tsens_get_trend,
.set_trips = tsens_set_trips,
@@ -1056,9 +1056,9 @@ static int tsens_register(struct tsens_priv *priv)
for (i = 0; i < priv->num_sensors; i++) {
priv->sensor[i].priv = priv;
- tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id,
- &priv->sensor[i],
- &tsens_of_ops);
+ tzd = devm_thermal_of_zone_register(priv->dev, priv->sensor[i].hw_id,
+ &priv->sensor[i],
+ &tsens_of_ops);
if (IS_ERR(tzd))
continue;
priv->sensor[i].tzd = tzd;
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> --- drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 19 +++++++++---------- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 12 ++++++------ drivers/thermal/qcom/tsens.c | 20 ++++++++++---------- 3 files changed, 25 insertions(+), 26 deletions(-)