| Message ID | 20220725103445.88674-3-marex@denx.de |
|---|---|
| State | Superseded |
| Headers | show |
| Series | gpio: mxc: Locking and direction input fix | expand |
On Mon, Jul 25, 2022 at 12:36 PM Marek Vasut <marex@denx.de> wrote: > > Always configure GPIO pins which are used as interrupt source as INPUTs. > In case the default pin configuration is OUTPUT, or the prior stage does > configure the pins as OUTPUT, then Linux will not reconfigure the pin as > INPUT and no interrupts are received. > > Always configure interrupt source GPIO pin as input to fix the above case. > > Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") > Signed-off-by: Marek Vasut <marex@denx.de> Can you move below lines > Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Loic Poulain <loic.poulain@linaro.org> > Cc: Marc Zyngier <maz@kernel.org> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: Peng Fan <peng.fan@nxp.com> > Cc: Shawn Guo <shawnguo@kernel.org> under '---' cutter line? The LORE archive will have all people you Cc'ed. ... The comment as per v3 still stays.
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 6cc98a5684ae1..95327c8963b6c 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -149,7 +149,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mxc_gpio_port *port = gc->private; unsigned long flags; - u32 bit, val; + u32 bit, val, dir; u32 gpio_idx = d->hwirq; int edge; void __iomem *reg = port->base; @@ -208,6 +208,10 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) writel(1 << gpio_idx, port->base + GPIO_ISR); + dir = readl(port->base + GPIO_GDIR); + dir &= ~BIT(gpio_idx); + writel(dir, port->base + GPIO_GDIR); + raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags); return 0;
Always configure GPIO pins which are used as interrupt source as INPUTs. In case the default pin configuration is OUTPUT, or the prior stage does configure the pins as OUTPUT, then Linux will not reconfigure the pin as INPUT and no interrupts are received. Always configure interrupt source GPIO pin as input to fix the above case. Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Marc Zyngier <maz@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> --- V2: Actually update and clear bits in GDIR register V3: Rebase on top of new patch 1/2, expand CC list, add Fixes tag V4: No change V5: No change --- drivers/gpio/gpio-mxc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)