diff mbox series

scsi: lpfc: Fix typo 'the the' in comment

Message ID 20220721103056.53143-1-slark_xiao@163.com
State New
Headers show
Series scsi: lpfc: Fix typo 'the the' in comment | expand

Commit Message

Slark Xiao July 21, 2022, 10:30 a.m. UTC
Replace 'the the' with 'the' some places in the comment.
Update 'the the' to 'then the' in 1 place.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
---
 drivers/scsi/lpfc/lpfc_attr.c    | 10 +++++-----
 drivers/scsi/lpfc/lpfc_els.c     |  2 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c |  2 +-
 drivers/scsi/lpfc/lpfc_init.c    |  4 ++--
 drivers/scsi/lpfc/lpfc_mbox.c    |  4 ++--
 drivers/scsi/lpfc/lpfc_nvmet.c   |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c     |  2 +-
 7 files changed, 13 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 09cf2cd0ae60..2d92bb725225 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2438,7 +2438,7 @@  lpfc_sriov_hw_max_virtfn_show(struct device *dev,
 
 /**
  * lpfc_enable_bbcr_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
  * @val: integer attribute value.
  *
  * Description:
@@ -2529,7 +2529,7 @@  lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
  * takes a default argument, a minimum and maximum argument.
  *
  * lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
  * @val: integer attribute value.
  *
  * Validates the min and max values then sets the adapter config field
@@ -2562,7 +2562,7 @@  lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
  * into a function with the name lpfc_hba_queue_depth_set
  *
  * lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
  * @val: integer attribute value.
  *
  * Description:
@@ -2691,7 +2691,7 @@  lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
  * lpfc_##attr##_init: validates the min and max values then sets the
  * adapter config field accordingly, or uses the default if out of range
  * and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
  * @val: integer attribute value.
  *
  * Returns:
@@ -2723,7 +2723,7 @@  lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
  * lpfc_##attr##_set: validates the min and max values then sets the
  * adapter config field if in the valid range. prints error message
  * and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
  * @val:	integer attribute value.
  *
  * Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 9e69de9eb992..32aeac0416f1 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -8654,7 +8654,7 @@  lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
  * @rrq: Pointer to the rrq struct.
  *
  * Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful then the completion handler will clear the RRQ.
  *
  * Return codes
  *   0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2645def612e6..70bd3704f131 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2452,7 +2452,7 @@  static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
  * @phba: pointer to lpfc hba data structure.
  * @fcf_index: the index of the fcf record to update
  * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so the round robin slection for the particular priority level
  * will try a different fcf record that does not have this bit set.
  * If the fcf record is re-read for any reason this flag is cleared brfore
  * adding it to the priority list.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 4a0eadd1c22c..2705c69ecd53 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5497,7 +5497,7 @@  lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
 	bf_set(lpfc_mbx_read_top_link_spd, la,
 	       (bf_get(lpfc_acqe_link_speed, acqe_link)));
 
-	/* Fake the the following irrelvant fields */
+	/* Fake the following irrelvant fields */
 	bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
 	bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
 	bf_set(lpfc_mbx_read_top_il, la, 0);
@@ -12492,7 +12492,7 @@  lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
 			/* Mark CPU as IRQ not assigned by the kernel */
 			cpup->flag |= LPFC_CPU_MAP_UNASSIGN;
 
-			/* If so, find a new_cpup thats on the the SAME
+			/* If so, find a new_cpup thats on the SAME
 			 * phys_id as cpup. start_cpu will start where we
 			 * left off so all unassigned entries don't get assgined
 			 * the IRQ of the first entry.
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 9858b1743769..cebb3d7598e5 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2509,7 +2509,7 @@  lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * information via a READ_FCF mailbox command. This mailbox command also is used
  * to indicate where received unsolicited frames from this FCF will be sent. By
  * default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * the RQ ID passed in the @phba. This can be overridden by the caller for
  * more complicated setups.
  **/
 void
@@ -2577,7 +2577,7 @@  lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * information via a READ_FCF mailbox command. This mailbox command also is used
  * to indicate where received unsolicited frames from this FCF will be sent. By
  * default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * the RQ ID passed in the @phba. This can be overridden by the caller for
  * more complicated setups.
  **/
 void
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index f7cfac0da9b6..7517dd55fe91 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1469,7 +1469,7 @@  lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
 	if (!infop)
 		return;
 
-	/* Cycle the the entire CPU context list for every MRQ */
+	/* Cycle the entire CPU context list for every MRQ */
 	for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
 		for_each_present_cpu(j) {
 			infop = lpfc_get_ctx_list(phba, j, i);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 608016725db9..c28127b5a975 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -20540,7 +20540,7 @@  lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
  * the offset after the write object mailbox has completed. @size is used to
  * determine the end of the object and whether the eof bit should be set.
  *
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
  * for the next write.
  * Return negative value for error cases.
  **/