new file mode 100644
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32G0 USB Type-C PD controller
+
+description: |
+ The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
+ typically using the UCSI protocol over I2C, with a dedicated alert
+ (interrupt) pin.
+
+maintainers:
+ - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+ compatible:
+ const: st,stm32g0-typec
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ connector:
+ type: object
+ $ref: /schemas/connector/usb-connector.yaml#
+ unevaluatedProperties: false
+
+ firmware-name:
+ description: |
+ Should contain the name of the default firmware image
+ file located on the firmware search path
+
+ wakeup-source: true
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec@53 {
+ compatible = "st,stm32g0-typec";
+ reg = <0x53>;
+ /* Alert pin on GPIO PE12 */
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpioe>;
+
+ /* Example with one type-C connector */
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ con_usb_c_ep: endpoint {
+ remote-endpoint = <&usb_ep>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ usb {
+ usb-role-switch;
+ port {
+ usb_ep: endpoint {
+ remote-endpoint = <&con_usb_c_ep>;
+ };
+ };
+ };
+...
Add DT schema documentation for the STM32G0 Type-C PD (Power Delivery) controller. STM32G0 provides an integrated USB Type-C and power delivery interface. It can be programmed with a firmware to handle UCSI protocol over I2C interface. A GPIO is used as an interrupt line. It may be used as a wakeup source, so use optional "wakeup-source" and "power-domains" properties to support wakeup. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- Changes in v2: - Krzysztof's review comments: update commit message, use ports, use unevaluatedProperties: false for usb-connector schema, define maxItems for power-domains, adopt generic node names, remove quotes --- .../bindings/usb/st,typec-stm32g0.yaml | 90 +++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml