diff mbox series

[v4,7/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags

Message ID 20220710164442.2958979-8-LinoSanfilippo@gmx.de
State Superseded
Headers show
Series Fixes and cleanup for RS485 | expand

Commit Message

Lino Sanfilippo July 10, 2022, 4:44 p.m. UTC 
From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

Before the drivers rs485_config() function is called the serial core
already ensures that only one of both options RTS on send or RTS after send
is set. So remove the concerning sanity check in the driver function to
avoid redundancy.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_dwlib.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 2c3b1468bd88..dbe4d44f60d4 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -187,16 +187,10 @@  static int dw8250_rs485_config(struct uart_port *p, struct ktermios *termios,
 	if (rs485->flags & SER_RS485_ENABLED) {
 		tcr |= DW_UART_TCR_RS485_EN;
 
-		if (rs485->flags & SER_RS485_RX_DURING_TX) {
+		if (rs485->flags & SER_RS485_RX_DURING_TX)
 			tcr |= DW_UART_TCR_XFER_MODE_DE_DURING_RE;
-		} else {
-			/* HW does not support same DE level for tx and rx */
-			if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
-			    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
-				return -EINVAL;
-
+		else
 			tcr |= DW_UART_TCR_XFER_MODE_DE_OR_RE;
-		}
 		dw8250_writel_ext(p, DW_UART_DE_EN, 1);
 		dw8250_writel_ext(p, DW_UART_RE_EN, 1);
 	} else {