diff mbox

hw/pl181.c: Add save/load support

Message ID 1324332104-29027-1-git-send-email-peter.maydell@linaro.org
State Accepted
Commit 624923be11846c3056639986993e0177f931dd44
Headers show

Commit Message

Peter Maydell Dec. 19, 2011, 10:01 p.m. UTC 
Add save/load support to the PL181.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
This isn't terribly useful until hw/sd.c has save/load support, of
course; I have a patch cooking for that.

 hw/pl181.c |   49 ++++++++++++++++++++++++++++++++++++++++---------
 1 files changed, 40 insertions(+), 9 deletions(-)

Comments

Avi Kivity Dec. 20, 2011, 10:55 a.m. UTC | #1 
On 12/20/2011 12:01 AM, Peter Maydell wrote:
> Add save/load support to the PL181.
>
> +        VMSTATE_INT32(linux_hack, pl181_state),
>

Is this real state?  Can't it be recovered somehow from other state?
Peter Maydell Dec. 20, 2011, 11:07 a.m. UTC | #2 
On 20 December 2011 10:55, Avi Kivity <avi@redhat.com> wrote:
> On 12/20/2011 12:01 AM, Peter Maydell wrote:
>> Add save/load support to the PL181.
>>
>> +        VMSTATE_INT32(linux_hack, pl181_state),
>>
>
> Is this real state?

Depends what you mean by "real state". It doesn't necessarily
correspond to a flipflop in the hardware implementation, but
it's definitely state in our implementation. (Conversely,
the hardware implementation has state which our s/w one does
not, most notably we don't use the command and data state
machine approach the hardware has.)

> Can't it be recovered somehow from other state?

No.

-- PMM
diff mbox

Patch

diff --git a/hw/pl181.c b/hw/pl181.c
index d05bc19..b79aa41 100644
--- a/hw/pl181.c
+++ b/hw/pl181.c
@@ -38,20 +38,45 @@  typedef struct {
     uint32_t datacnt;
     uint32_t status;
     uint32_t mask[2];
-    int fifo_pos;
-    int fifo_len;
+    int32_t fifo_pos;
+    int32_t fifo_len;
     /* The linux 2.6.21 driver is buggy, and misbehaves if new data arrives
        while it is reading the FIFO.  We hack around this be defering
        subsequent transfers until after the driver polls the status word.
        http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=4446/1
      */
-    int linux_hack;
+    int32_t linux_hack;
     uint32_t fifo[PL181_FIFO_LEN];
     qemu_irq irq[2];
     /* GPIO outputs for 'card is readonly' and 'card inserted' */
     qemu_irq cardstatus[2];
 } pl181_state;
 
+static const VMStateDescription vmstate_pl181 = {
+    .name = "pl181",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(clock, pl181_state),
+        VMSTATE_UINT32(power, pl181_state),
+        VMSTATE_UINT32(cmdarg, pl181_state),
+        VMSTATE_UINT32(cmd, pl181_state),
+        VMSTATE_UINT32(datatimer, pl181_state),
+        VMSTATE_UINT32(datalength, pl181_state),
+        VMSTATE_UINT32(respcmd, pl181_state),
+        VMSTATE_UINT32_ARRAY(response, pl181_state, 4),
+        VMSTATE_UINT32(datactrl, pl181_state),
+        VMSTATE_UINT32(datacnt, pl181_state),
+        VMSTATE_UINT32(status, pl181_state),
+        VMSTATE_UINT32_ARRAY(mask, pl181_state, 2),
+        VMSTATE_INT32(fifo_pos, pl181_state),
+        VMSTATE_INT32(fifo_len, pl181_state),
+        VMSTATE_INT32(linux_hack, pl181_state),
+        VMSTATE_UINT32_ARRAY(fifo, pl181_state, PL181_FIFO_LEN),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 #define PL181_CMD_INDEX     0x3f
 #define PL181_CMD_RESPONSE  (1 << 6)
 #define PL181_CMD_LONGRESP  (1 << 7)
@@ -420,9 +445,9 @@  static const MemoryRegionOps pl181_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static void pl181_reset(void *opaque)
+static void pl181_reset(DeviceState *d)
 {
-    pl181_state *s = (pl181_state *)opaque;
+    pl181_state *s = DO_UPCAST(pl181_state, busdev.qdev, d);
 
     s->power = 0;
     s->cmdarg = 0;
@@ -459,15 +484,21 @@  static int pl181_init(SysBusDevice *dev)
     qdev_init_gpio_out(&s->busdev.qdev, s->cardstatus, 2);
     dinfo = drive_get_next(IF_SD);
     s->card = sd_init(dinfo ? dinfo->bdrv : NULL, 0);
-    qemu_register_reset(pl181_reset, s);
-    pl181_reset(s);
-    /* ??? Save/restore.  */
     return 0;
 }
 
+static SysBusDeviceInfo pl181_info = {
+    .init = pl181_init,
+    .qdev.name = "pl181",
+    .qdev.size = sizeof(pl181_state),
+    .qdev.vmsd = &vmstate_pl181,
+    .qdev.reset = pl181_reset,
+    .qdev.no_user = 1,
+};
+
 static void pl181_register_devices(void)
 {
-    sysbus_register_dev("pl181", sizeof(pl181_state), pl181_init);
+    sysbus_register_withprop(&pl181_info);
 }
 
 device_init(pl181_register_devices)