[v8,1/3] dt-bindings: mfd: Convert atmel-flexcom to json-schema

diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 000000000000..bfa7d340a198
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,92 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Atmel Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-flexcom
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: ../i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index 9d837535637b..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,63 +0,0 @@ 
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
-- reg:			Should be the offset/length value for Flexcom dedicated
-			I/O registers (without USART, TWI or SPI registers).
-- clocks:		Should be the Flexcom peripheral clock from PMC.
-- #address-cells:	Should be <1>
-- #size-cells:		Should be <1>
-- ranges:		Should be one range for the full I/O register region
-			(including USART, TWI and SPI registers).
-- atmel,flexcom-mode:	Should be one of the following values:
-			- <1> for USART
-			- <2> for SPI
-			- <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
-	compatible = "atmel,sama5d2-flexcom";
-	reg = <0xf8034000 0x200>;
-	clocks = <&flx0_clk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0xf8034000 0x800>;
-	atmel,flexcom-mode = <2>;
-
-	spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&flx0_clk>;
-		clock-names = "spi_clk";
-		atmel,fifo-size = <32>;
-
-		flash@0 {
-			compatible = "atmel,at25f512b";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-};