diff mbox series

[v3] drm/msm/dp: make eDP panel as the first connected connector

Message ID 1657128246-15929-1-git-send-email-quic_khsieh@quicinc.com
State Superseded
Headers show
Series [v3] drm/msm/dp: make eDP panel as the first connected connector | expand

Commit Message

Kuogee Hsieh July 6, 2022, 5:24 p.m. UTC
Some userspace presumes that the first connected connector is the main
display, where it's supposed to display e.g. the login screen. For
laptops, this should be the main panel.

This patch call drm_helper_move_panel_connectors_to_head() after
drm_bridge_connector_init() to make sure eDP stay at head of
connected connector list. This fixes unexpected corruption happen
at eDP panel if eDP is not placed at head of connected connector
list.

Changes in v2:
-- move drm_helper_move_panel_connectors_to_head() to
		dpu_kms_drm_obj_init()

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Dmitry Baryshkov July 6, 2022, 5:25 p.m. UTC | #1
On 06/07/2022 20:24, Kuogee Hsieh wrote:
> Some userspace presumes that the first connected connector is the main
> display, where it's supposed to display e.g. the login screen. For
> laptops, this should be the main panel.
> 
> This patch call drm_helper_move_panel_connectors_to_head() after
> drm_bridge_connector_init() to make sure eDP stay at head of
> connected connector list. This fixes unexpected corruption happen
> at eDP panel if eDP is not placed at head of connected connector
> list.
> 
> Changes in v2:
> -- move drm_helper_move_panel_connectors_to_head() to
> 		dpu_kms_drm_obj_init()
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 2b9d931..50ff666 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -763,6 +763,8 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms *dpu_kms)
>   	if (ret)
>   		return ret;
>   
> +	drm_helper_move_panel_connectors_to_head(dev);

This should be in msm_drv.c unless you have a strong reason to have it here.

> +
>   	num_encoders = 0;
>   	drm_for_each_encoder(encoder, dev)
>   		num_encoders++;
Dmitry Baryshkov July 6, 2022, 5:41 p.m. UTC | #2
On 06/07/2022 20:38, Kuogee Hsieh wrote:
> 
> On 7/6/2022 10:25 AM, Dmitry Baryshkov wrote:
>> On 06/07/2022 20:24, Kuogee Hsieh wrote:
>>> Some userspace presumes that the first connected connector is the main
>>> display, where it's supposed to display e.g. the login screen. For
>>> laptops, this should be the main panel.
>>>
>>> This patch call drm_helper_move_panel_connectors_to_head() after
>>> drm_bridge_connector_init() to make sure eDP stay at head of
>>> connected connector list. This fixes unexpected corruption happen
>>> at eDP panel if eDP is not placed at head of connected connector
>>> list.
>>>
>>> Changes in v2:
>>> -- move drm_helper_move_panel_connectors_to_head() to
>>>         dpu_kms_drm_obj_init()
>>>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>> ---
>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
>>>   1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c 
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> index 2b9d931..50ff666 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> @@ -763,6 +763,8 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms 
>>> *dpu_kms)
>>>       if (ret)
>>>           return ret;
>>>   +    drm_helper_move_panel_connectors_to_head(dev);
>>
>> This should be in msm_drv.c unless you have a strong reason to have it 
>> here.
> Can you please  provide more info why should be in msm_drv.c?

Let me quote my message from v1 review:

Please move this call to the msm_drm_init(). Calling this function 
somewhere after the ->kms_init() would make sure that all panel 
connectors are close to the top of the list, whichever MDP/DPU driver is 
used and whichever actual interface is bound to this panel.

>> _dpu_kms_drm_obj_init() create and initialize drm obj one by one and 
>> _dpu_kms_setup_displays() had created system wide connectors/interfaces .
> 
> After that should be fine to move edp to head of connector list.
> 
>>> +
>>>       num_encoders = 0;
>>>       drm_for_each_encoder(encoder, dev)
>>>           num_encoders++;
>>
>>
Kuogee Hsieh July 6, 2022, 5:54 p.m. UTC | #3
On 7/6/2022 10:41 AM, Dmitry Baryshkov wrote:
> On 06/07/2022 20:38, Kuogee Hsieh wrote:
>>
>> On 7/6/2022 10:25 AM, Dmitry Baryshkov wrote:
>>> On 06/07/2022 20:24, Kuogee Hsieh wrote:
>>>> Some userspace presumes that the first connected connector is the main
>>>> display, where it's supposed to display e.g. the login screen. For
>>>> laptops, this should be the main panel.
>>>>
>>>> This patch call drm_helper_move_panel_connectors_to_head() after
>>>> drm_bridge_connector_init() to make sure eDP stay at head of
>>>> connected connector list. This fixes unexpected corruption happen
>>>> at eDP panel if eDP is not placed at head of connected connector
>>>> list.
>>>>
>>>> Changes in v2:
>>>> -- move drm_helper_move_panel_connectors_to_head() to
>>>>         dpu_kms_drm_obj_init()
>>>>
>>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>>> ---
>>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
>>>>   1 file changed, 2 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c 
>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>>> index 2b9d931..50ff666 100644
>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>>> @@ -763,6 +763,8 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms 
>>>> *dpu_kms)
>>>>       if (ret)
>>>>           return ret;
>>>>   +    drm_helper_move_panel_connectors_to_head(dev);
>>>
>>> This should be in msm_drv.c unless you have a strong reason to have 
>>> it here.
>> Can you please  provide more info why should be in msm_drv.c?
>
> Let me quote my message from v1 review:
>
> Please move this call to the msm_drm_init(). Calling this function 
> somewhere after the ->kms_init() would make sure that all panel 
> connectors are close to the top of the list, whichever MDP/DPU driver 
> is used and whichever actual interface is bound to this panel.
>
Below are the call flow in timing order, ->kms_init does not create 
connectors/interfaces, hw_init does that.

1) ->kms_init

2) ->hw_init -> dpu_kms_hw_init --> _dpu_kms_drm_obj_init()  --> 
_dpu_kms_setup_displays()--> msm_dp_modeset_init() --> creator 
connectors/interfaces

3) drm_helper_move_panel_connectors_to_head() <== add here??

>>> _dpu_kms_drm_obj_init() create and initialize drm obj one by one and 
>>> _dpu_kms_setup_displays() had created system wide 
>>> connectors/interfaces .
>>
>> After that should be fine to move edp to head of connector list.
>>
>>>> +
>>>>       num_encoders = 0;
>>>>       drm_for_each_encoder(encoder, dev)
>>>>           num_encoders++;
>>>
>>>
>
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 2b9d931..50ff666 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -763,6 +763,8 @@  static int _dpu_kms_drm_obj_init(struct dpu_kms *dpu_kms)
 	if (ret)
 		return ret;
 
+	drm_helper_move_panel_connectors_to_head(dev);
+
 	num_encoders = 0;
 	drm_for_each_encoder(encoder, dev)
 		num_encoders++;