@@ -4689,34 +4689,32 @@ static const struct macb_config np4_config = {
.usrio = &macb_default_usrio,
};
-static int zynqmp_init(struct platform_device *pdev)
+static int init_reset_optional(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct macb *bp = netdev_priv(dev);
int ret;
if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
- /* Ensure PS-GTR PHY device used in SGMII mode is ready */
+ /* Ensure PHY device used in SGMII mode is ready */
bp->sgmii_phy = devm_phy_optional_get(&pdev->dev, NULL);
if (IS_ERR(bp->sgmii_phy)) {
ret = PTR_ERR(bp->sgmii_phy);
dev_err_probe(&pdev->dev, ret,
- "failed to get PS-GTR PHY\n");
+ "failed to get SGMII PHY\n");
return ret;
}
ret = phy_init(bp->sgmii_phy);
if (ret) {
- dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
+ dev_err(&pdev->dev, "failed to init SGMII PHY: %d\n",
ret);
return ret;
}
}
- /* Fully reset GEM controller at hardware level using zynqmp-reset driver,
- * if mapped in device tree.
- */
+ /* Fully reset controller at hardware level if mapped in device tree */
ret = device_reset_optional(&pdev->dev);
if (ret) {
dev_err_probe(&pdev->dev, ret, "failed to reset controller");
@@ -4737,7 +4735,7 @@ static const struct macb_config zynqmp_config = {
MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
- .init = zynqmp_init,
+ .init = init_reset_optional,
.jumbo_max_len = 10240,
.usrio = &macb_default_usrio,
};
@@ -4751,6 +4749,17 @@ static const struct macb_config zynq_config = {
.usrio = &macb_default_usrio,
};
+static const struct macb_config mpfs_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
+ MACB_CAPS_JUMBO |
+ MACB_CAPS_GEM_HAS_PTP,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = init_reset_optional,
+ .usrio = &macb_default_usrio,
+ .jumbo_max_len = 10240,
+};
+
static const struct macb_config sama7g5_gem_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG |
MACB_CAPS_MIIONRGMII,
@@ -4787,6 +4796,7 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
{ .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
+ { .compatible = "microchip,mpfs-macb", .data = &mpfs_config },
{ .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
{ .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
{ /* sentinel */ }
To date, the Microchip PolarFire SoC (MPFS) has been using the cdns,macb compatible, however the generic device does not have reset support. Add a new compatible & .data for MPFS to hook into the reset functionality added for zynqmp support (and make the zynqmp init function generic in the process). Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- drivers/net/ethernet/cadence/macb_main.c | 26 ++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)