@@ -32,13 +32,23 @@ struct fwu_mdata_ops {
};
#define FWU_MDATA_VERSION 0x1
+#define FWU_IMAGE_ACCEPTED 0x1
#define FWU_MDATA_GUID \
EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
+#define FWU_OS_REQUEST_FW_REVERT_GUID \
+ EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \
+ 0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0)
+
+#define FWU_OS_REQUEST_FW_ACCEPT_GUID \
+ EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
+ 0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
+
u8 fwu_update_checks_pass(void);
int fwu_boottime_checks(void);
+int fwu_trial_state_ctr_start(void);
int fwu_get_mdata(struct fwu_mdata **mdata);
int fwu_update_mdata(struct fwu_mdata *mdata);
@@ -966,3 +966,9 @@ config PHANDLE_CHECK_SEQ
phandles in fdtdec_get_alias_seq() function.
endmenu
+
+menu "FWU Multi Bank Updates"
+
+source lib/fwu_updates/Kconfig
+
+endmenu
@@ -9,6 +9,7 @@ obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_EFI_LOADER) += efi_driver/
obj-$(CONFIG_EFI_LOADER) += efi_loader/
obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += efi_selftest/
+obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_updates/
obj-$(CONFIG_LZMA) += lzma/
obj-$(CONFIG_BZIP2) += bzip2/
obj-$(CONFIG_TIZEN) += tizen/
@@ -14,6 +14,7 @@
#include <env.h>
#include <fdtdec.h>
#include <fs.h>
+#include <fwu.h>
#include <hang.h>
#include <malloc.h>
#include <mapmem.h>
@@ -32,6 +33,17 @@ static const efi_guid_t efi_guid_firmware_management_capsule_id =
EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID;
const efi_guid_t efi_guid_firmware_management_protocol =
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID;
+const efi_guid_t fwu_guid_os_request_fw_revert =
+ FWU_OS_REQUEST_FW_REVERT_GUID;
+const efi_guid_t fwu_guid_os_request_fw_accept =
+ FWU_OS_REQUEST_FW_ACCEPT_GUID;
+
+#define FW_ACCEPT_OS (u32)0x8000
+
+__maybe_unused static u32 update_index;
+__maybe_unused static bool capsule_update;
+__maybe_unused static bool fw_accept_os;
+static bool image_index_check = true;
#ifdef CONFIG_EFI_CAPSULE_ON_DISK
/* for file system access */
@@ -205,7 +217,8 @@ efi_fmp_find(efi_guid_t *image_type, u8 image_index, u64 instance,
log_debug("+++ desc[%d] index: %d, name: %ls\n",
j, desc->image_index, desc->image_id_name);
if (!guidcmp(&desc->image_type_id, image_type) &&
- (desc->image_index == image_index) &&
+ (!image_index_check ||
+ desc->image_index == image_index) &&
(!instance ||
!desc->hardware_instance ||
desc->hardware_instance == instance))
@@ -388,6 +401,87 @@ efi_status_t efi_capsule_authenticate(const void *capsule, efi_uintn_t capsule_s
}
#endif /* CONFIG_EFI_CAPSULE_AUTHENTICATE */
+static bool fwu_empty_capsule(struct efi_capsule_header *capsule)
+{
+ return !guidcmp(&capsule->capsule_guid,
+ &fwu_guid_os_request_fw_revert) ||
+ !guidcmp(&capsule->capsule_guid,
+ &fwu_guid_os_request_fw_accept);
+}
+
+static efi_status_t fwu_empty_capsule_process(
+ struct efi_capsule_header *capsule)
+{
+ int status;
+ u32 active_idx;
+ efi_status_t ret;
+ efi_guid_t *image_guid;
+
+ if (!guidcmp(&capsule->capsule_guid,
+ &fwu_guid_os_request_fw_revert)) {
+ /*
+ * One of the previously updated image has
+ * failed the OS acceptance test. OS has
+ * requested to revert back to the earlier
+ * boot index
+ */
+ status = fwu_revert_boot_index();
+ if (status < 0) {
+ log_err("Failed to revert the FWU boot index\n");
+ if (status == -ENODEV ||
+ status == -ERANGE ||
+ status == -EIO)
+ ret = EFI_DEVICE_ERROR;
+ else if (status == -EINVAL)
+ ret = EFI_INVALID_PARAMETER;
+ else
+ ret = EFI_OUT_OF_RESOURCES;
+ } else {
+ ret = EFI_SUCCESS;
+ log_err("Reverted the FWU active_index. Recommend rebooting the system\n");
+ }
+ } else {
+ /*
+ * Image accepted by the OS. Set the acceptance
+ * status for the image.
+ */
+ image_guid = (void *)(char *)capsule +
+ capsule->header_size;
+
+ status = fwu_get_active_index(&active_idx);
+ if (status < 0) {
+ log_err("Unable to get the active_index from the FWU metadata\n");
+ if (status == -ENODEV ||
+ status == -ERANGE ||
+ status == -EIO)
+ ret = EFI_DEVICE_ERROR;
+ else if (status == -EINVAL)
+ ret = EFI_INVALID_PARAMETER;
+ else
+ ret = EFI_OUT_OF_RESOURCES;
+
+ return ret;
+ }
+
+ status = fwu_accept_image(image_guid, active_idx);
+ if (status < 0) {
+ log_err("Unable to set the Accept bit for the image %pUs\n",
+ image_guid);
+ if (status == -ENODEV ||
+ status == -ERANGE ||
+ status == -EIO)
+ ret = EFI_DEVICE_ERROR;
+ else if (status == -EINVAL)
+ ret = EFI_INVALID_PARAMETER;
+ else
+ ret = EFI_OUT_OF_RESOURCES;
+ } else {
+ ret = EFI_SUCCESS;
+ }
+ }
+
+ return ret;
+}
/**
* efi_capsule_update_firmware - update firmware from capsule
@@ -407,10 +501,42 @@ static efi_status_t efi_capsule_update_firmware(
void *image_binary, *vendor_code;
efi_handle_t *handles;
efi_uintn_t no_handles;
- int item;
+ int item, alt_no;
struct efi_firmware_management_protocol *fmp;
u16 *abort_reason;
+ efi_guid_t image_type_id;
efi_status_t ret = EFI_SUCCESS;
+ int status;
+ u8 image_index;
+
+ if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
+ if (!fwu_empty_capsule(capsule_data) &&
+ !fwu_update_checks_pass()) {
+ log_err("FWU checks failed. Cannot start update\n");
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (fwu_empty_capsule(capsule_data)) {
+ capsule_update = false;
+ return fwu_empty_capsule_process(capsule_data);
+ } else {
+ capsule_update = true;
+ }
+
+ /* Obtain the update_index from the platform */
+ status = fwu_plat_get_update_index(&update_index);
+ if (status < 0) {
+ log_err("Failed to get the FWU update_index value\n");
+ return EFI_DEVICE_ERROR;
+ }
+
+ fw_accept_os = capsule_data->flags & FW_ACCEPT_OS ? 0x1 : 0x0;
+ /*
+ * For Multi Bank updates, the image index is determined at
+ * runtime based on the value of the update bank.
+ */
+ image_index_check = false;
+ }
/* sanity check */
if (capsule_data->header_size < sizeof(*capsule) ||
@@ -485,8 +611,36 @@ static efi_status_t efi_capsule_update_firmware(
goto out;
}
+ if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
+ /*
+ * Based on the value of update_image_type_id,
+ * derive the alt number value. This will be
+ * passed as update_image_index to the
+ * set_image function.
+ */
+ image_type_id = image->update_image_type_id;
+ status = fwu_get_image_alt_num(&image_type_id,
+ update_index,
+ &alt_no);
+ if (status < 0) {
+ log_err("Unable to get the alt no for the image type %pUs\n",
+ &image_type_id);
+ if (status == -ENODEV || status == -EIO)
+ ret = EFI_DEVICE_ERROR;
+ else if (status == -ENOMEM)
+ ret = EFI_OUT_OF_RESOURCES;
+ else if (status == -ERANGE || status == -EINVAL)
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+ log_debug("alt_no %u for Image Type Id %pUs\n",
+ alt_no, &image_type_id);
+ image_index = alt_no + 1;
+ } else {
+ image_index = image->update_image_index;
+ }
abort_reason = NULL;
- ret = EFI_CALL(fmp->set_image(fmp, image->update_image_index,
+ ret = EFI_CALL(fmp->set_image(fmp, image_index,
image_binary,
image_binary_size,
vendor_code, NULL,
@@ -497,6 +651,38 @@ static efi_status_t efi_capsule_update_firmware(
efi_free_pool(abort_reason);
goto out;
}
+
+ if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
+ if (!fw_accept_os) {
+ /*
+ * The OS will not be accepting the firmware
+ * images. Set the accept bit of all the
+ * images contained in this capsule.
+ */
+ status = fwu_accept_image(&image_type_id,
+ update_index);
+ } else {
+ status = fwu_clear_accept_image(&image_type_id,
+ update_index);
+ }
+
+ if (status < 0) {
+ log_err("Unable to %s the accept bit for the image %pUs\n",
+ fw_accept_os ? "clear" : "set",
+ &image_type_id);
+ if (status == -ENODEV || status == -EIO)
+ ret = EFI_DEVICE_ERROR;
+ else if (status == -ENOMEM)
+ ret = EFI_OUT_OF_RESOURCES;
+ else if (status == -ERANGE || status == -EINVAL)
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+ log_debug("%s the accepted bit for Image %pUs\n",
+ fw_accept_os ? "Cleared" : "Set",
+ &image_type_id);
+ }
+
}
out:
@@ -1102,8 +1288,10 @@ efi_status_t efi_launch_capsules(void)
{
struct efi_capsule_header *capsule = NULL;
u16 **files;
+ int status;
unsigned int nfiles, index, i;
efi_status_t ret;
+ bool update_status = true;
if (check_run_capsules() != EFI_SUCCESS)
return EFI_SUCCESS;
@@ -1131,12 +1319,14 @@ efi_status_t efi_launch_capsules(void)
ret = efi_capsule_read_file(files[i], &capsule);
if (ret == EFI_SUCCESS) {
ret = efi_capsule_update_firmware(capsule);
- if (ret != EFI_SUCCESS)
+ if (ret != EFI_SUCCESS) {
log_err("Applying capsule %ls failed.\n",
files[i]);
- else
+ update_status = false;
+ } else {
log_info("Applying capsule %ls succeeded.\n",
files[i]);
+ }
/* create CapsuleXXXX */
set_capsule_result(index, capsule, ret);
@@ -1144,6 +1334,7 @@ efi_status_t efi_launch_capsules(void)
free(capsule);
} else {
log_err("Reading capsule %ls failed\n", files[i]);
+ update_status = false;
}
/* delete a capsule either in case of success or failure */
ret = efi_capsule_delete_file(files[i]);
@@ -1151,7 +1342,37 @@ efi_status_t efi_launch_capsules(void)
log_err("Deleting capsule %ls failed\n",
files[i]);
}
+
efi_capsule_scan_done();
+ if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
+ if (update_status == true && capsule_update == true) {
+ /*
+ * All the capsules have been updated successfully,
+ * update the FWU metadata.
+ */
+ log_debug("Update Complete. Now updating active_index to %u\n",
+ update_index);
+ status = fwu_update_active_index(update_index);
+ if (status < 0) {
+ log_err("Failed to update FWU metadata index values\n");
+ if (status == -EINVAL || status == -ERANGE)
+ ret = EFI_INVALID_PARAMETER;
+ else if (status == -ENODEV || status == -EIO)
+ ret = EFI_DEVICE_ERROR;
+ else if (status == -ENOMEM)
+ ret = EFI_OUT_OF_RESOURCES;
+ } else {
+ log_debug("Successfully updated the active_index\n");
+ status = fwu_trial_state_ctr_start();
+ if (status < 0)
+ ret = EFI_DEVICE_ERROR;
+ else
+ ret = EFI_SUCCESS;
+ }
+ } else if (capsule_update == true && update_status == false) {
+ log_err("All capsules were not updated. Not updating FWU metadata\n");
+ }
+ }
for (i = 0; i < nfiles; i++)
free(files[i]);
@@ -350,7 +350,8 @@ efi_status_t efi_init_obj_list(void)
goto out;
/* Execute capsules after reboot */
- if (IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK) &&
+ if (!IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE) &&
+ IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK) &&
!IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK_EARLY))
ret = efi_launch_capsules();
out:
new file mode 100644
@@ -0,0 +1,31 @@
+config FWU_MULTI_BANK_UPDATE
+ bool "Enable FWU Multi Bank Update Feature"
+ depends on EFI_HAVE_CAPSULE_SUPPORT
+ select PARTITION_TYPE_GUID
+ select EFI_SETUP_EARLY
+ help
+ Feature for updating firmware images on platforms having
+ multiple banks(copies) of the firmware images. One of the
+ bank is selected for updating all the firmware components
+
+config FWU_NUM_BANKS
+ int "Number of Banks defined by the platform"
+ depends on FWU_MULTI_BANK_UPDATE
+ help
+ Define the number of banks of firmware images on a platform
+
+config FWU_NUM_IMAGES_PER_BANK
+ int "Number of firmware images per bank"
+ depends on FWU_MULTI_BANK_UPDATE
+ help
+ Define the number of firmware images per bank. This value
+ should be the same for all the banks.
+
+config FWU_TRIAL_STATE_CNT
+ int "Number of times system boots in Trial State"
+ depends on FWU_MULTI_BANK_UPDATE
+ default 3
+ help
+ With FWU Multi Bank Update feature enabled, number of times
+ the platform is allowed to boot in Trial State after an
+ update.
@@ -1,6 +1,7 @@
-# SPDX-License-Identifier: GPL-2.0+
+# SPDX-License-Identifier: GPL-2.0-or-later
#
# Copyright (c) 2022, Linaro Limited
#
+obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu.o
obj-$(CONFIG_FWU_MDATA_GPT_BLK) += fwu_gpt.o
@@ -113,6 +113,32 @@ u8 fwu_update_checks_pass(void)
return !trial_state && boottime_check;
}
+int fwu_trial_state_ctr_start(void)
+{
+ int ret;
+ u32 var_attributes;
+ efi_status_t status;
+ efi_uintn_t var_size;
+ u16 trial_state_ctr;
+
+ var_size = (efi_uintn_t)sizeof(trial_state_ctr);
+ var_attributes = EFI_VARIABLE_NON_VOLATILE |
+ EFI_VARIABLE_BOOTSERVICE_ACCESS;
+
+ trial_state_ctr = ret = 0;
+ status = efi_set_variable_int(u"TrialStateCtr",
+ &efi_global_variable_guid,
+ var_attributes,
+ var_size,
+ &trial_state_ctr, false);
+ if (status != EFI_SUCCESS) {
+ log_err("Unable to increment TrialStateCtr variable\n");
+ ret = -1;
+ }
+
+ return ret;
+}
+
int fwu_boottime_checks(void)
{
int ret;
The FWU Multi Bank Update feature supports updation of firmware images to one of multiple sets(also called banks) of images. The firmware images are clubbed together in banks, with the system booting images from the active bank. Information on the images such as which bank they belong to is stored as part of the metadata structure, which is stored on the same storage media as the firmware images on a dedicated partition. At the time of update, the metadata is read to identify the bank to which the images need to be flashed(update bank). On a successful update, the metadata is modified to set the updated bank as active bank to subsequently boot from. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> --- Changes since V5: * Use u"TrialStateCtr" as suggested by Patrick include/fwu.h | 10 ++ lib/Kconfig | 6 + lib/Makefile | 1 + lib/efi_loader/efi_capsule.c | 231 ++++++++++++++++++++++++++++++++++- lib/efi_loader/efi_setup.c | 3 +- lib/fwu_updates/Kconfig | 31 +++++ lib/fwu_updates/Makefile | 3 +- lib/fwu_updates/fwu.c | 26 ++++ 8 files changed, 304 insertions(+), 7 deletions(-) create mode 100644 lib/fwu_updates/Kconfig