@@ -784,9 +784,11 @@ void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
sdiodev->txglomsz = sdiodev->settings->bus.sdio.txglomsz;
}
-#ifdef CONFIG_PM_SLEEP
static int brcmf_sdiod_freezer_attach(struct brcmf_sdio_dev *sdiodev)
{
+ if (!IS_ENABLED(CONFIG_PM_SLEEP))
+ return 0;
+
sdiodev->freezer = kzalloc(sizeof(*sdiodev->freezer), GFP_KERNEL);
if (!sdiodev->freezer)
return -ENOMEM;
@@ -833,7 +835,8 @@ static void brcmf_sdiod_freezer_off(struct brcmf_sdio_dev *sdiodev)
bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev)
{
- return atomic_read(&sdiodev->freezer->freezing);
+ return IS_ENABLED(CONFIG_PM_SLEEP) &&
+ atomic_read(&sdiodev->freezer->freezing);
}
void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev)
@@ -847,24 +850,16 @@ void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev)
void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev)
{
- atomic_inc(&sdiodev->freezer->thread_count);
+ if (IS_ENABLED(CONFIG_PM_SLEEP))
+ atomic_inc(&sdiodev->freezer->thread_count);
}
void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev)
{
- atomic_dec(&sdiodev->freezer->thread_count);
-}
-#else
-static int brcmf_sdiod_freezer_attach(struct brcmf_sdio_dev *sdiodev)
-{
- return 0;
+ if (IS_ENABLED(CONFIG_PM_SLEEP))
+ atomic_dec(&sdiodev->freezer->thread_count);
}
-static void brcmf_sdiod_freezer_detach(struct brcmf_sdio_dev *sdiodev)
-{
-}
-#endif /* CONFIG_PM_SLEEP */
-
int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
{
sdiodev->state = BRCMF_SDIOD_DOWN;
@@ -1136,7 +1131,6 @@ void brcmf_sdio_wowl_config(struct device *dev, bool enabled)
brcmf_dbg(SDIO, "WOWL not supported\n");
}
-#ifdef CONFIG_PM_SLEEP
static int brcmf_ops_sdio_suspend(struct device *dev)
{
struct sdio_func *func;
@@ -1204,11 +1198,9 @@ static int brcmf_ops_sdio_resume(struct device *dev)
return ret;
}
-static const struct dev_pm_ops brcmf_sdio_pm_ops = {
- .suspend = brcmf_ops_sdio_suspend,
- .resume = brcmf_ops_sdio_resume,
-};
-#endif /* CONFIG_PM_SLEEP */
+static DEFINE_SIMPLE_DEV_PM_OPS(brcmf_sdio_pm_ops,
+ brcmf_ops_sdio_suspend,
+ brcmf_ops_sdio_resume);
static struct sdio_driver brcmf_sdmmc_driver = {
.probe = brcmf_ops_sdio_probe,
@@ -1217,9 +1209,7 @@ static struct sdio_driver brcmf_sdmmc_driver = {
.id_table = brcmf_sdmmc_ids,
.drv = {
.owner = THIS_MODULE,
-#ifdef CONFIG_PM_SLEEP
- .pm = &brcmf_sdio_pm_ops,
-#endif /* CONFIG_PM_SLEEP */
+ .pm = pm_sleep_ptr(&brcmf_sdio_pm_ops),
.coredump = brcmf_dev_coredump,
},
};
@@ -4020,15 +4020,14 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
*/
brcmf_sdiod_sgtable_alloc(sdiodev);
-#ifdef CONFIG_PM_SLEEP
/* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
* is true or when platform data OOB irq is true).
*/
- if ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_KEEP_POWER) &&
+ if (IS_ENABLED(CONFIG_PM_SLEEP) &&
+ (sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_KEEP_POWER) &&
((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_WAKE_SDIO_IRQ) ||
(sdiodev->settings->bus.sdio.oob_irq_supported)))
sdiodev->bus_if->wowl_supported = true;
-#endif
if (brcmf_sdio_kso_init(bus)) {
brcmf_err("error enabling KSO\n");
@@ -346,26 +346,10 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
enum brcmf_sdiod_state state);
-#ifdef CONFIG_PM_SLEEP
bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev);
-#else
-static inline bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev)
-{
- return false;
-}
-static inline void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev)
-{
-}
-static inline void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev)
-{
-}
-static inline void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev)
-{
-}
-#endif /* CONFIG_PM_SLEEP */
int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev);
int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev);
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle the .suspend/.resume callbacks. These macros allow the suspend and resume functions to be automatically dropped by the compiler when CONFIG_SUSPEND is disabled, without having to use #ifdef guards. Some other functions not directly called by the .suspend/.resume callbacks, but still related to PM were also taken outside #ifdef guards. The advantage is then that these functions are now always compiled independently of any Kconfig option, and thanks to that bugs and regressions are easier to catch. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- Notes: v2: - Move checks for IS_ENABLED(CONFIG_PM_SLEEP) inside functions to keep the calling functions intact. - Reword the commit message to explain why this patch is useful. v3: - Remove useless IS_ENABLED(CONFIG_PM_SLEEP) check in brcmf_sdiod_freezer_detach() .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 36 +++++++------------ .../broadcom/brcm80211/brcmfmac/sdio.c | 5 ++- .../broadcom/brcm80211/brcmfmac/sdio.h | 16 --------- 3 files changed, 15 insertions(+), 42 deletions(-)