| Message ID | 20220627150753.34510-1-ilpo.jarvinen@linux.intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | serial: stm32: Clear prev values before setting RTS delays | expand |
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index db3dd9731ee1..0cfe183f4076 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -72,6 +72,8 @@ static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, *cr3 |= USART_CR3_DEM; over8 = *cr1 & USART_CR1_OVER8; + *cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + if (over8) rs485_deat_dedt = delay_ADE * baud * 8; else
The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/tty/serial/stm32-usart.c | 2 ++ 1 file changed, 2 insertions(+)