diff mbox series

[v3] Bluetooth: btmtksdio: Add in-band wakeup support

Message ID 848d3d5baf23eb78411a9672b8973ae3c593db98.1656285304.git.objelf@gmail.com
State Accepted
Commit df332800a914e9fd97b83aa63832979227fd8a8d
Headers show
Series [v3] Bluetooth: btmtksdio: Add in-band wakeup support | expand

Commit Message

Sean Wang June 26, 2022, 11:27 p.m. UTC 
From: Sean Wang <sean.wang@mediatek.com>

Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")
adds the wake on bluethooth via a dedicated GPIO.

Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup),
when supported by the SDIO host driver.

Co-developed-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: enhance the patch description and comments
v3: add a way suggested by the AngeloGioacchino Del Regno that look
    elegant and can avoid the addition of the BTMTKSDIO_INBAND_WAKEUP
    flag
---
 drivers/bluetooth/btmtksdio.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

bluez.test.bot@gmail.com June 26, 2022, 11:59 p.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=653986

---Test result---

Test Summary:
CheckPatch                    PASS      1.34 seconds
GitLint                       PASS      0.76 seconds
SubjectPrefix                 PASS      0.65 seconds
BuildKernel                   PASS      32.11 seconds
BuildKernel32                 PASS      28.16 seconds
Incremental Build with patchesPASS      38.75 seconds
TestRunner: Setup             PASS      481.60 seconds
TestRunner: l2cap-tester      PASS      17.44 seconds
TestRunner: bnep-tester       PASS      6.14 seconds
TestRunner: mgmt-tester       PASS      103.10 seconds
TestRunner: rfcomm-tester     PASS      9.59 seconds
TestRunner: sco-tester        PASS      9.44 seconds
TestRunner: smp-tester        PASS      9.46 seconds
TestRunner: userchan-tester   PASS      6.37 seconds



---
Regards,
Linux Bluetooth
patchwork-bot+bluetooth@kernel.org June 27, 2022, 11 p.m. UTC | #2 
Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Mon, 27 Jun 2022 07:27:36 +0800 you wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")
> adds the wake on bluethooth via a dedicated GPIO.
> 
> Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup),
> when supported by the SDIO host driver.
> 
> [...]

Here is the summary with links:
  - [v3] Bluetooth: btmtksdio: Add in-band wakeup support
    https://git.kernel.org/bluetooth/bluetooth-next/c/681ec6abcd7f

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index d6700efcfe8c..f9a3444753c2 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -1282,6 +1282,13 @@  static void btmtksdio_cmd_timeout(struct hci_dev *hdev)
 	hci_reset_dev(hdev);
 }
 
+static bool btmtksdio_sdio_inband_wakeup(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	return device_may_wakeup(bdev->dev);
+}
+
 static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
 {
 	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
@@ -1349,6 +1356,14 @@  static int btmtksdio_probe(struct sdio_func *func,
 	hdev->shutdown = btmtksdio_shutdown;
 	hdev->send     = btmtksdio_send_frame;
 	hdev->wakeup   = btmtksdio_sdio_wakeup;
+	/*
+	 * If SDIO controller supports wake on Bluetooth, sending a wakeon
+	 * command is not necessary.
+	 */
+	if (device_can_wakeup(func->card->host->parent))
+		hdev->wakeup = btmtksdio_sdio_inband_wakeup;
+	else
+		hdev->wakeup = btmtksdio_sdio_wakeup;
 	hdev->set_bdaddr = btmtk_set_bdaddr;
 
 	SET_HCIDEV_DEV(hdev, &func->dev);