@@ -191,8 +191,10 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
#define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21)
/* LUCID EVO PLL specific settings and offsets */
+#define LUCID_EVO_PCAL_NOT_DONE BIT(8)
#define LUCID_EVO_ENABLE_VOTE_RUN BIT(25)
#define LUCID_EVO_PLL_L_VAL_MASK GENMASK(15, 0)
+#define LUCID_EVO_PLL_CAL_L_VAL_SHIFT 16
/* ZONDA PLL specific */
#define ZONDA_PLL_OUT_MASK 0xf
@@ -1994,6 +1996,32 @@ const struct clk_ops clk_alpha_pll_zonda_ops = {
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_zonda_ops);
+void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config)
+{
+ u32 lval = config->l;
+
+ lval |= TRION_PLL_CAL_VAL << LUCID_EVO_PLL_CAL_L_VAL_SHIFT;
+ clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), lval);
+ clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll), config->config_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll), config->config_ctl_hi1_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll), config->user_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll), config->test_ctl_hi1_val);
+
+ /* Disable PLL output */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+
+ /* Set operation mode to STANDBY and de-assert the reset */
+ regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+EXPORT_SYMBOL_GPL(clk_lucid_evo_pll_configure);
+
static int alpha_pll_lucid_evo_enable(struct clk_hw *hw)
{
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
@@ -2079,6 +2107,31 @@ static void alpha_pll_lucid_evo_disable(struct clk_hw *hw)
regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
}
+static int alpha_pll_lucid_evo_prepare(struct clk_hw *hw)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ struct clk_hw *p;
+ u32 val = 0;
+ int ret;
+
+ /* Return early if calibration is not needed. */
+ regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+ if (!(val & LUCID_EVO_PCAL_NOT_DONE))
+ return 0;
+
+ p = clk_hw_get_parent(hw);
+ if (!p)
+ return -EINVAL;
+
+ ret = alpha_pll_lucid_evo_enable(hw);
+ if (ret)
+ return ret;
+
+ alpha_pll_lucid_evo_disable(hw);
+
+ return 0;
+}
+
static unsigned long alpha_pll_lucid_evo_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -2114,3 +2167,14 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops = {
.set_rate = clk_lucid_evo_pll_postdiv_set_rate,
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_evo_ops);
+
+const struct clk_ops clk_alpha_pll_lucid_evo_ops = {
+ .prepare = alpha_pll_lucid_evo_prepare,
+ .enable = alpha_pll_lucid_evo_enable,
+ .disable = alpha_pll_lucid_evo_disable,
+ .is_enabled = clk_trion_pll_is_enabled,
+ .recalc_rate = alpha_pll_lucid_evo_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+ .set_rate = alpha_pll_lucid_5lpe_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_evo_ops);
@@ -152,6 +152,8 @@ extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
extern const struct clk_ops clk_alpha_pll_zonda_ops;
#define clk_alpha_pll_postdiv_zonda_ops clk_alpha_pll_postdiv_fabia_ops
+
+extern const struct clk_ops clk_alpha_pll_lucid_evo_ops;
extern const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops;
extern const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops;
@@ -168,6 +170,7 @@ void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
void clk_zonda_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
-
+void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config);
#endif
Add controls for Lucid EVO PLL configuration and export control functions to clock controller drivers. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> --- Changes from v7 to v8: * improved commit message per request from Stephen. Changes from v3 to v7: * none. Changes from v2 to v3: * improved commit subject and description per ask from Bjorn. Changes from v1 to v2: * none drivers/clk/qcom/clk-alpha-pll.c | 64 ++++++++++++++++++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.h | 5 ++- 2 files changed, 68 insertions(+), 1 deletion(-)