Message ID | 20220624104420.257368-1-robimarko@gmail.com |
---|---|
State | New |
Headers | show |
Series | [v4,1/2] PCI: qcom: Move IPQ8074 DBI register accesses after phy_power_on() | expand |
On Fri, 24 Jun 2022 at 12:44, Robert Marko <robimarko@gmail.com> wrote: > > Currently the Gen2 port in IPQ8074 will cause the system to hang as it > accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only > accesible after phy_power_on(). > > Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is > executed after phy_power_on(). > > Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") > Signed-off-by: Robert Marko <robimarko@gmail.com> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Hi, Bjorn, is there something else I need to fixup? Regards, Robert > --- > Changes in v4: > * Correct title and description > > Changes in v3: > * Make sure it applies onto 5.19-rc3 > * Update the commit description to make it clear this only affects the > Gen2 port > > Changes in v2: > * Rebase onto next-20220621 > --- > drivers/pci/controller/dwc/pcie-qcom.c | 48 +++++++++++++++----------- > 1 file changed, 28 insertions(+), 20 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index a1f1aca2fb59..24708d5d817d 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -1061,9 +1061,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) > struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; > struct dw_pcie *pci = pcie->pci; > struct device *dev = pci->dev; > - u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > int i, ret; > - u32 val; > > for (i = 0; i < ARRAY_SIZE(res->rst); i++) { > ret = reset_control_assert(res->rst[i]); > @@ -1120,6 +1118,33 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) > goto err_clk_aux; > } > > + return 0; > + > +err_clk_aux: > + clk_disable_unprepare(res->ahb_clk); > +err_clk_ahb: > + clk_disable_unprepare(res->axi_s_clk); > +err_clk_axi_s: > + clk_disable_unprepare(res->axi_m_clk); > +err_clk_axi_m: > + clk_disable_unprepare(res->iface); > +err_clk_iface: > + /* > + * Not checking for failure, will anyway return > + * the original failure in 'ret'. > + */ > + for (i = 0; i < ARRAY_SIZE(res->rst); i++) > + reset_control_assert(res->rst[i]); > + > + return ret; > +} > + > +static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie) > +{ > + struct dw_pcie *pci = pcie->pci; > + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > + u32 val; > + > writel(SLV_ADDR_SPACE_SZ, > pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); > > @@ -1147,24 +1172,6 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) > PCI_EXP_DEVCTL2); > > return 0; > - > -err_clk_aux: > - clk_disable_unprepare(res->ahb_clk); > -err_clk_ahb: > - clk_disable_unprepare(res->axi_s_clk); > -err_clk_axi_s: > - clk_disable_unprepare(res->axi_m_clk); > -err_clk_axi_m: > - clk_disable_unprepare(res->iface); > -err_clk_iface: > - /* > - * Not checking for failure, will anyway return > - * the original failure in 'ret'. > - */ > - for (i = 0; i < ARRAY_SIZE(res->rst); i++) > - reset_control_assert(res->rst[i]); > - > - return ret; > } > > static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > @@ -1596,6 +1603,7 @@ static const struct qcom_pcie_ops ops_2_4_0 = { > static const struct qcom_pcie_ops ops_2_3_3 = { > .get_resources = qcom_pcie_get_resources_2_3_3, > .init = qcom_pcie_init_2_3_3, > + .post_init = qcom_pcie_post_init_2_3_3, > .deinit = qcom_pcie_deinit_2_3_3, > .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > }; > -- > 2.36.1 >
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a1f1aca2fb59..24708d5d817d 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1061,9 +1061,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; - u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); int i, ret; - u32 val; for (i = 0; i < ARRAY_SIZE(res->rst); i++) { ret = reset_control_assert(res->rst[i]); @@ -1120,6 +1118,33 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) goto err_clk_aux; } + return 0; + +err_clk_aux: + clk_disable_unprepare(res->ahb_clk); +err_clk_ahb: + clk_disable_unprepare(res->axi_s_clk); +err_clk_axi_s: + clk_disable_unprepare(res->axi_m_clk); +err_clk_axi_m: + clk_disable_unprepare(res->iface); +err_clk_iface: + /* + * Not checking for failure, will anyway return + * the original failure in 'ret'. + */ + for (i = 0; i < ARRAY_SIZE(res->rst); i++) + reset_control_assert(res->rst[i]); + + return ret; +} + +static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie) +{ + struct dw_pcie *pci = pcie->pci; + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u32 val; + writel(SLV_ADDR_SPACE_SZ, pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); @@ -1147,24 +1172,6 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) PCI_EXP_DEVCTL2); return 0; - -err_clk_aux: - clk_disable_unprepare(res->ahb_clk); -err_clk_ahb: - clk_disable_unprepare(res->axi_s_clk); -err_clk_axi_s: - clk_disable_unprepare(res->axi_m_clk); -err_clk_axi_m: - clk_disable_unprepare(res->iface); -err_clk_iface: - /* - * Not checking for failure, will anyway return - * the original failure in 'ret'. - */ - for (i = 0; i < ARRAY_SIZE(res->rst); i++) - reset_control_assert(res->rst[i]); - - return ret; } static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) @@ -1596,6 +1603,7 @@ static const struct qcom_pcie_ops ops_2_4_0 = { static const struct qcom_pcie_ops ops_2_3_3 = { .get_resources = qcom_pcie_get_resources_2_3_3, .init = qcom_pcie_init_2_3_3, + .post_init = qcom_pcie_post_init_2_3_3, .deinit = qcom_pcie_deinit_2_3_3, .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, };