| Message ID | 20220619212549.1240891-6-dmitry.baryshkov@linaro.org |
|---|---|
| State | Accepted |
| Commit | 52a0a6cb49f73801e43dfce17d8d075625d20294 |
| Headers | show |
| Series | clk: qcom: gcc-msm8916: modernize the driver | expand |
On 19.06.2022 23:25, Dmitry Baryshkov wrote: > The gcc_mss_q6_bimc_axi_clk clock depends on the bimc_ddr_clk_src clock. > Move it down in the file to come after the source clock. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > drivers/clk/qcom/gcc-msm8916.c | 34 +++++++++++++++++----------------- > 1 file changed, 17 insertions(+), 17 deletions(-) > > diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c > index 7962edbdbcf6..4d726ca4b0da 100644 > --- a/drivers/clk/qcom/gcc-msm8916.c > +++ b/drivers/clk/qcom/gcc-msm8916.c > @@ -2594,23 +2594,6 @@ static struct clk_branch gcc_mss_cfg_ahb_clk = { > }, > }; > > -static struct clk_branch gcc_mss_q6_bimc_axi_clk = { > - .halt_reg = 0x49004, > - .clkr = { > - .enable_reg = 0x49004, > - .enable_mask = BIT(0), > - .hw.init = &(struct clk_init_data){ > - .name = "gcc_mss_q6_bimc_axi_clk", > - .parent_names = (const char *[]){ > - "bimc_ddr_clk_src", > - }, > - .num_parents = 1, > - .flags = CLK_SET_RATE_PARENT, > - .ops = &clk_branch2_ops, > - }, > - }, > -}; > - > static struct clk_branch gcc_oxili_ahb_clk = { > .halt_reg = 0x59028, > .clkr = { > @@ -2860,6 +2843,23 @@ static struct clk_branch gcc_bimc_gpu_clk = { > }, > }; > > +static struct clk_branch gcc_mss_q6_bimc_axi_clk = { > + .halt_reg = 0x49004, > + .clkr = { > + .enable_reg = 0x49004, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gcc_mss_q6_bimc_axi_clk", > + .parent_names = (const char *[]){ > + "bimc_ddr_clk_src", > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + .ops = &clk_branch2_ops, > + }, > + }, > +}; > + > static struct clk_branch gcc_jpeg_tbu_clk = { > .halt_reg = 0x12034, > .clkr = {
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c index 7962edbdbcf6..4d726ca4b0da 100644 --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -2594,23 +2594,6 @@ static struct clk_branch gcc_mss_cfg_ahb_clk = { }, }; -static struct clk_branch gcc_mss_q6_bimc_axi_clk = { - .halt_reg = 0x49004, - .clkr = { - .enable_reg = 0x49004, - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_mss_q6_bimc_axi_clk", - .parent_names = (const char *[]){ - "bimc_ddr_clk_src", - }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, - }, - }, -}; - static struct clk_branch gcc_oxili_ahb_clk = { .halt_reg = 0x59028, .clkr = { @@ -2860,6 +2843,23 @@ static struct clk_branch gcc_bimc_gpu_clk = { }, }; +static struct clk_branch gcc_mss_q6_bimc_axi_clk = { + .halt_reg = 0x49004, + .clkr = { + .enable_reg = 0x49004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mss_q6_bimc_axi_clk", + .parent_names = (const char *[]){ + "bimc_ddr_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_branch gcc_jpeg_tbu_clk = { .halt_reg = 0x12034, .clkr = {
The gcc_mss_q6_bimc_axi_clk clock depends on the bimc_ddr_clk_src clock. Move it down in the file to come after the source clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/clk/qcom/gcc-msm8916.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-)