diff mbox series

[v5,2/2] intel_idle: Add a new flag to initialize the AMX state

Message ID 20220608164748.11864-3-chang.seok.bae@intel.com
State New
Headers show
Series x86/fpu: Make AMX state ready for CPU idle | expand

Commit Message

Chang S. Bae June 8, 2022, 4:47 p.m. UTC 
The non-initialized AMX state can be the cause of C-state demotion from C6
to C1E. This low-power idle state may improve power savings and thus result
in a higher available turbo frequency budget.

This behavior is implementation-specific. Initialize the state for the C6
entrance of Sapphire Rapids as needed.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Tested-by : Zhang Rui <rui.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
---
Changes from v2:
* Remove an unnecessary backslash (Rafael Wysocki).

Changes from v1:
* Simplify the code with a new flag (Rui).
* Rebase on Artem's patches for SPR intel_idle.
* Massage the changelog.
---
 drivers/idle/intel_idle.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index b9bb94bd0f67..5f36c4b28f9d 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -54,6 +54,7 @@ 
 #include <asm/intel-family.h>
 #include <asm/mwait.h>
 #include <asm/msr.h>
+#include <asm/fpu/api.h>
 
 #define INTEL_IDLE_VERSION "0.5.1"
 
@@ -105,6 +106,11 @@  static unsigned int mwait_substates __initdata;
  */
 #define CPUIDLE_FLAG_ALWAYS_ENABLE	BIT(15)
 
+/*
+ * Initialize large xstate for the C6-state entrance.
+ */
+#define CPUIDLE_FLAG_INIT_XSTATE	BIT(16)
+
 /*
  * MWAIT takes an 8-bit "hint" in EAX "suggesting"
  * the C-state (top nibble) and sub-state (bottom nibble)
@@ -139,6 +145,9 @@  static __cpuidle int intel_idle(struct cpuidle_device *dev,
 	if (state->flags & CPUIDLE_FLAG_IRQ_ENABLE)
 		local_irq_enable();
 
+	if (state->flags & CPUIDLE_FLAG_INIT_XSTATE)
+		fpu_idle_fpregs();
+
 	mwait_idle_with_hints(eax, ecx);
 
 	return index;
@@ -159,8 +168,12 @@  static __cpuidle int intel_idle(struct cpuidle_device *dev,
 static __cpuidle int intel_idle_s2idle(struct cpuidle_device *dev,
 				       struct cpuidle_driver *drv, int index)
 {
-	unsigned long eax = flg2MWAIT(drv->states[index].flags);
 	unsigned long ecx = 1; /* break on interrupt flag */
+	struct cpuidle_state *state = &drv->states[index];
+	unsigned long eax = flg2MWAIT(state->flags);
+
+	if (state->flags & CPUIDLE_FLAG_INIT_XSTATE)
+		fpu_idle_fpregs();
 
 	mwait_idle_with_hints(eax, ecx);
 
@@ -895,7 +908,8 @@  static struct cpuidle_state spr_cstates[] __initdata = {
 	{
 		.name = "C6",
 		.desc = "MWAIT 0x20",
-		.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED |
+					   CPUIDLE_FLAG_INIT_XSTATE,
 		.exit_latency = 290,
 		.target_residency = 800,
 		.enter = &intel_idle,