diff mbox series

[v1] Bluetooth: Fix CVSD SCO setup failure

Message ID 1654772596-10019-1-git-send-email-quic_zijuhu@quicinc.com
State Superseded
Headers show
Series [v1] Bluetooth: Fix CVSD SCO setup failure | expand

Commit Message

quic_zijuhu June 9, 2022, 11:03 a.m. UTC
It will set up SCO after all CVSD eSCO attempts failure, but
still fails to setup SCO finally due to wrong D1/D0 @retrans_effort
within @esco_param_cvsd, so change it from 0x1 to 0xff to avoid
Invalid HCI Command Parameters error.

< HCI Command: Setup Synchrono.. (0x01|0x0028) plen 17  #3427
        Handle: 3
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 65535
        Setting: 0x0060
          Input Coding: Linear
          Input Data Format: 2's complement
          Input Sample Size: 16-bit
          # of bits padding at MSB: 0
          Air Coding Format: CVSD
        Retransmission effort: Optimize for power consumption (0x01)
        Packet type: 0x03c4
          HV3 may be used
          2-EV3 may not be used
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4               #3428
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #3429
        Status: Invalid HCI Command Parameters (0x12)
        Handle: 0
        Address: 14:3F:A6:47:56:15 (OUI 14-3F-A6)
        Link type: SCO (0x00)
        Transmission interval: 0x00
        Retransmission window: 0x00
        RX packet length: 0
        TX packet length: 0
        Air mode: u-law log (0x00)

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
---
 net/bluetooth/hci_conn.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

bluez.test.bot@gmail.com June 9, 2022, noon UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=648803

---Test result---

Test Summary:
CheckPatch                    PASS      0.83 seconds
GitLint                       PASS      0.41 seconds
SubjectPrefix                 PASS      0.30 seconds
BuildKernel                   PASS      34.73 seconds
BuildKernel32                 PASS      33.51 seconds
Incremental Build with patchesPASS      43.15 seconds
TestRunner: Setup             PASS      543.61 seconds
TestRunner: l2cap-tester      PASS      19.00 seconds
TestRunner: bnep-tester       PASS      6.61 seconds
TestRunner: mgmt-tester       PASS      114.47 seconds
TestRunner: rfcomm-tester     PASS      10.30 seconds
TestRunner: sco-tester        PASS      10.04 seconds
TestRunner: smp-tester        PASS      10.00 seconds
TestRunner: userchan-tester   PASS      6.76 seconds



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 7829433d54c1..2627d5ac15d6 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -45,8 +45,8 @@  static const struct sco_param esco_param_cvsd[] = {
 	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,	0x01 }, /* S3 */
 	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,	0x01 }, /* S2 */
 	{ EDR_ESCO_MASK | ESCO_EV3,   0x0007,	0x01 }, /* S1 */
-	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0x01 }, /* D1 */
-	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0x01 }, /* D0 */
+	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0xff }, /* D1 */
+	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0xff }, /* D0 */
 };
 
 static const struct sco_param sco_param_cvsd[] = {