@@ -58,7 +58,7 @@ ov5640_ep: endpoint {
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
};
@@ -56,7 +56,7 @@ led-2 {
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
@@ -355,7 +355,7 @@ &uart1 {
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo2>;
vddio-supply = <®_dldo4>;
@@ -43,7 +43,7 @@ led {
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
@@ -71,7 +71,7 @@ reg_usb1_vbus: usb1-vbus {
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
@@ -369,7 +369,7 @@ &uart1 {
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo2>;
vddio-supply = <®_dldo4>;
@@ -4,6 +4,7 @@
// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -660,7 +661,7 @@ ohci1: usb@1c1b400 {
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -673,7 +674,8 @@ pio: pinctrl@1c20800 {
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -1226,7 +1228,7 @@ hdmi: hdmi@1ee0000 {
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
@@ -1287,7 +1289,7 @@ r_intc: interrupt-controller@1f00c00 {
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
@@ -86,7 +86,7 @@ reg_vcc_wifi_io: vcc-wifi-io {
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
@@ -314,7 +314,7 @@ &uart1 {
bluetooth {
compatible = "brcm,bcm4345c5";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
@@ -13,7 +13,7 @@ aliases {
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
@@ -64,7 +64,7 @@ &uart1 {
bluetooth {
compatible = "brcm,bcm4345c5";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
@@ -78,7 +78,7 @@ spdif_out: spdif-out {
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
};
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun50i-h6-ccu.h>
@@ -237,7 +238,7 @@ ve_sram: sram-section@0 {
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -317,7 +318,7 @@ pio: pinctrl@300b000 {
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -725,7 +726,7 @@ dwc3: usb@5200000 {
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_XHCI>,
<&ccu CLK_BUS_XHCI>,
- <&rtc 0>;
+ <&rtc CLK_OSC32K>;
clock-names = "ref", "bus_early", "suspend";
resets = <&ccu RST_BUS_XHCI>;
/*
@@ -931,7 +932,7 @@ rtc: rtc@7000000 {
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
@@ -960,7 +961,8 @@ r_pio: pinctrl@7022000 {
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
The binding header provides descriptive names for the RTC clock indexes, since the indexes were arbitrarily chosen by the binding, not by the hardware. Let's use the names, so the meaning is clearer. Signed-off-by: Samuel Holland <samuel@sholland.org> --- .../boot/dts/allwinner/sun50i-a64-amarula-relic.dts | 2 +- .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 4 ++-- .../boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 2 +- .../boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 4 ++-- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 ++++++---- .../boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 4 ++-- .../boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts | 4 ++-- arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi | 2 +- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 +++++++----- 9 files changed, 24 insertions(+), 20 deletions(-)