diff mbox series

[1/2] ARM: dts: qcom: msm8974: re-add missing pinctrl

Message ID 20220606160421.1641778-1-luca@z3ntu.xyz
State Accepted
Commit 03110b46c99bb0c712f46bec660b1c3f674ce100
Headers show
Series [1/2] ARM: dts: qcom: msm8974: re-add missing pinctrl | expand

Commit Message

Luca Weiss June 6, 2022, 4:04 p.m. UTC 
As part of a recent cleanup commit, the pinctrl for a few uart and i2c
nodes was removed. Adjust the names and/or add it back and assign it to
the uart and i2c nodes.

Fixes: 1dfe967ec7cf ("ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Bjorn, could you please pick this up for -fixes so it lands in an
upcoming 5.19-rc?

 arch/arm/boot/dts/qcom-msm8974.dtsi | 30 +++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

Comments

Bjorn Andersson July 3, 2022, 3:56 a.m. UTC | #1 
On Mon, 6 Jun 2022 18:04:21 +0200, Luca Weiss wrote:
> As part of a recent cleanup commit, the pinctrl for a few uart and i2c
> nodes was removed. Adjust the names and/or add it back and assign it to
> the uart and i2c nodes.
> 
> 

Applied, thanks!

[1/2] ARM: dts: qcom: msm8974: re-add missing pinctrl
      commit: 03110b46c99bb0c712f46bec660b1c3f674ce100
[2/2] ARM: dts: qcom: msm8974-*: re-add remoteproc supplies
      (no commit info)

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 814ad0b46232..c3b8a6d63027 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -506,6 +506,8 @@  blsp1_uart2: serial@f991e000 {
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
 			status = "disabled";
 		};
 
@@ -581,6 +583,9 @@  blsp2_uart1: serial@f995d000 {
 			interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
 			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -599,6 +604,8 @@  blsp2_uart4: serial@f9960000 {
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
 			status = "disabled";
 		};
 
@@ -639,6 +646,9 @@  blsp2_i2c6: i2c@f9968000 {
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -1256,7 +1266,7 @@  cd {
 				};
 			};
 
-			blsp1_uart2_active: blsp1-uart2-active {
+			blsp1_uart2_default: blsp1-uart2-default {
 				rx {
 					pins = "gpio5";
 					function = "blsp_uart2";
@@ -1272,7 +1282,7 @@  tx {
 				};
 			};
 
-			blsp2_uart1_active: blsp2-uart1-active {
+			blsp2_uart1_default: blsp2-uart1-default {
 				tx-rts {
 					pins = "gpio41", "gpio44";
 					function = "blsp_uart7";
@@ -1295,7 +1305,7 @@  blsp2_uart1_sleep: blsp2-uart1-sleep {
 				bias-pull-down;
 			};
 
-			blsp2_uart4_active: blsp2-uart4-active {
+			blsp2_uart4_default: blsp2-uart4-default {
 				tx-rts {
 					pins = "gpio53", "gpio56";
 					function = "blsp_uart10";
@@ -1406,7 +1416,19 @@  blsp2_i2c5_sleep: blsp2-i2c5-sleep {
 				bias-pull-up;
 			};
 
-			/* BLSP2_I2C6 info is missing - nobody uses it though? */
+			blsp2_i2c6_default: blsp2-i2c6-default {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
 
 			spi8_default: spi8_default {
 				mosi {