| Message ID | 20220602122929.18896-1-quic_mpubbise@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | ath11k: Avoid REO CMD failed prints during firmware recovery | expand |
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> wrote: > Currently when firmware recovery is in progress, we do not queue REO > commands to the firmware, instead -ESHUTDOWN will be returned to the > caller leading to a failure print on the console. The REO command in > the problem scenario is sent for all tids of a peer in which case we > will have 16 failure prints on the console for a single peer. For an > AP usecase, this count would be even higher in a worst case scenario. > Since these commands are bound to fail during firmware recovery, it > is better to avoid printing these failures and thereby avoid message > flooding on the console. > > Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 > > Fixes: 8ee8d38ca472 ("ath11k: Fix crash during firmware recovery on reo cmd ring access") > Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Patch applied to ath-next branch of ath.git, thanks. 0ab52b2bd7be ath11k: Avoid REO CMD failed prints during firmware recovery
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index e16beb96c37c..2148acf37071 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -835,8 +835,9 @@ void ath11k_peer_rx_tid_delete(struct ath11k *ar, HAL_REO_CMD_UPDATE_RX_QUEUE, &cmd, ath11k_dp_rx_tid_del_func); if (ret) { - ath11k_err(ar->ab, "failed to send HAL_REO_CMD_UPDATE_RX_QUEUE cmd, tid %d (%d)\n", - tid, ret); + if (ret != -ESHUTDOWN) + ath11k_err(ar->ab, "failed to send HAL_REO_CMD_UPDATE_RX_QUEUE cmd, tid %d (%d)\n", + tid, ret); dma_unmap_single(ar->ab->dev, rx_tid->paddr, rx_tid->size, DMA_BIDIRECTIONAL); kfree(rx_tid->vaddr);
Currently when firmware recovery is in progress, we do not queue REO commands to the firmware, instead -ESHUTDOWN will be returned to the caller leading to a failure print on the console. The REO command in the problem scenario is sent for all tids of a peer in which case we will have 16 failure prints on the console for a single peer. For an AP usecase, this count would be even higher in a worst case scenario. Since these commands are bound to fail during firmware recovery, it is better to avoid printing these failures and thereby avoid message flooding on the console. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: 8ee8d38ca472 ("ath11k: Fix crash during firmware recovery on reo cmd ring access") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/dp_rx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)