diff mbox series

[v8,3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device

Message ID 1654066564-20518-4-git-send-email-quic_kriskura@quicinc.com
State Superseded
Headers show
Series None | expand

Commit Message

Krishna Kurapati June 1, 2022, 6:56 a.m. UTC
Overriding the SNPS Phy tuning parameters for SC7280 IDP device.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Krzysztof Kozlowski June 8, 2022, 9:36 a.m. UTC | #1
On 01/06/2022 08:56, Krishna Kurapati wrote:
> Overriding the SNPS Phy tuning parameters for SC7280 IDP device.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b8..589258a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -317,6 +317,12 @@ 
 	vdda-pll-supply = <&vreg_l10c_0p8>;
 	vdda33-supply = <&vreg_l2b_3p0>;
 	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
 };
 
 &usb_1_qmpphy {