diff mbox series

[2/3] arm64: dts: add dts files for bcmbca SoC bcm4912

Message ID 20220528005654.13809-3-william.zhang@broadcom.com
State Accepted
Commit 1ba56aeb391401c4cb2126c39f90b3cdbfabdb3f
Headers show
Series arm64: bcmbca: add bcm4912 SoC support | expand

Commit Message

William Zhang May 28, 2022, 12:56 a.m. UTC
Add dts for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the
SoC description dts header and bcm94912.dts is a simple dts file for
Broadcom BCM94912 Reference board that only enable the UART port.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   3 +-
 .../boot/dts/broadcom/bcmbca/bcm4912.dtsi     | 128 ++++++++++++++++++
 .../boot/dts/broadcom/bcmbca/bcm94912.dts     |  30 ++++
 3 files changed, 160 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts

Comments

Florian Fainelli June 8, 2022, 8:16 a.m. UTC | #1
On Fri, 27 May 2022 17:56:52 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Add dts for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the
> SoC description dts header and bcm94912.dts is a simple dts file for
> Broadcom BCM94912 Reference board that only enable the UART port.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index d5f89245336c..9bdab7778cbd 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -1,2 +1,3 @@ 
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb \
+				bcm94912.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
new file mode 100644
index 000000000000..312076e0b002
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -0,0 +1,128 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm4912", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+		cpu_off = <1>;
+		cpu_on = <2>;
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x81000000 0x0 0x4000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x1000 0x0 0x1000>,
+				<0x0 0x2000 0x0 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0xff800000 0x0 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x12000 0x0 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
new file mode 100644
index 000000000000..a3623e6f6919
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -0,0 +1,30 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	model = "Broadcom BCM94912 Reference Board";
+	compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};