@@ -249,7 +249,8 @@ config ARCH_INTEL_SOCFPGA
bool "Intel's SoCFPGA ARMv8 Families"
help
This enables support for Intel's SoCFPGA ARMv8 families:
- Stratix 10 (ex. Altera), Agilex and eASIC N5X.
+ Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
+ Agilex and eASIC N5X.
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
- socfpga_stratix10_socdk_nand.dtb
+ socfpga_stratix10_socdk_nand.dtb \
+ socfpga_stratix10_swvp.dtb
new file mode 100644
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022, Intel Corporation
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+ model = "SOCFPGA Stratix 10 SWVP";
+ compatible = "arm,foundation-aarch64", "arm,vexpress";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
+
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ bootargs = "rdinit=/sbin/init ip=dhcp mem=2048M";
+ stdout-path = "serial1:115200n8";
+ linux,initrd-start = <0x10000000>;
+ linux,initrd-end = <0x125c8324>;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ soc {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+
+ l2-cache@fffff000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffff000 0x1000>;
+ interrupts = <0x0 0x12 0x4>;
+ cache-unified;
+ cache-level = <0x2>;
+ linux,phandle = <0x1>;
+ };
+ };
+};
+
+&cpu0 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu1 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu2 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu3 {
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>;
+ snps,max-mtu = <0x0>;
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>;
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>;
+};
+
+&mmc {
+ status = "okay";
+ altr,dw-mshc-ciu-div = <0x3>;
+ altr,dw-mshc-sdr-timing = <0x0 0x3>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ broken-cd;
+ bus-width = <4>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+ status = "okay";
+};
+
+&usb1 {
+ clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+ status = "okay";
+};
+
+&rst {
+ altr,modrst-offset = <0x20>;
+};
+
+&sysmgr {
+ reg = <0xffd12000 0x1000>;
+ interrupts = <0x0 0x10 0x4>;
+ cpu1-start-addr = <0xffd06230>;
+};