@@ -35,11 +35,13 @@ Specify a hardware pattern for a Qualcomm LPG LED.
The pattern is a series of brightness and hold-time pairs, with the hold-time
expressed in milliseconds. The hold time is a property of the pattern and must
therefor be identical for each element in the pattern (except for the pauses
-described below).
+described below). As the LPG hardware is not able to perform the linear
+transitions expected by the leds-trigger-pattern format, each entry in the
+pattern must be followed a zero-length entry of the same brightness.
Simple pattern::
- "255 500 0 500"
+ "255 500 255 0 0 500 0 0"
^
|
@@ -54,7 +56,7 @@ in the pattern, the so called "low pause" and "high pause".
Low-pause pattern::
- "255 1000 0 500 255 500 0 500"
+ "255 1000 255 0 0 500 0 0 255 500 255 0 0 500 0 0"
^
|
@@ -704,11 +704,12 @@ static int lpg_blink_mc_set(struct led_classdev *cdev,
return ret;
}
-static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *pattern,
+static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
u32 len, int repeat)
{
struct lpg_channel *chan;
struct lpg *lpg = led->lpg;
+ struct led_pattern *pattern;
unsigned int brightness_a;
unsigned int brightness_b;
unsigned int actual_len;
@@ -719,18 +720,48 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *pattern,
unsigned int hi_idx;
unsigned int i;
bool ping_pong = true;
- int ret;
+ int ret = -EINVAL;
/* Hardware only support oneshot or indefinite loops */
if (repeat != -1 && repeat != 1)
return -EINVAL;
+ /*
+ * The standardized leds-trigger-pattern format defines that the
+ * brightness of the LED follows a linear transition from one entry
+ * in the pattern to the next, over the given delta_t time. It
+ * describes that the way to perform instant transitions a zero-length
+ * entry should be added following a pattern entry.
+ *
+ * The LPG hardware is only able to perform the latter (no linear
+ * transitions), so require each entry in the pattern to be followed by
+ * a zero-length transition.
+ */
+ if (len % 2)
+ return -EINVAL;
+
+ pattern = kcalloc(len / 2, sizeof(*pattern), GFP_KERNEL);
+ if (!pattern)
+ return -ENOMEM;
+
+ for (i = 0; i < len; i += 2) {
+ if (led_pattern[i].brightness != led_pattern[i + 1].brightness)
+ goto out_free_pattern;
+ if (led_pattern[i + 1].delta_t != 0)
+ goto out_free_pattern;
+
+ pattern[i / 2].brightness = led_pattern[i].brightness;
+ pattern[i / 2].delta_t = led_pattern[i].delta_t;
+ }
+
+ len /= 2;
+
/*
* Specifying a pattern of length 1 causes the hardware to iterate
* through the entire LUT, so prohibit this.
*/
if (len < 2)
- return -EINVAL;
+ goto out_free_pattern;
/*
* The LPG plays patterns with at a fixed pace, a "low pause" can be
@@ -781,13 +812,13 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *pattern,
* specify hi pause. Reject other variations.
*/
if (i != actual_len - 1)
- return -EINVAL;
+ goto out_free_pattern;
}
}
/* LPG_RAMP_DURATION_REG is a 9bit */
if (delta_t >= BIT(9))
- return -EINVAL;
+ goto out_free_pattern;
/* Find "low pause" and "high pause" in the pattern */
lo_pause = pattern[0].delta_t;
@@ -814,6 +845,8 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *pattern,
out_unlock:
mutex_unlock(&lpg->lock);
+out_free_pattern:
+ kfree(pattern);
return ret;
}
The leds-trigger-pattern documentation describes how the brightness of the LED should transition linearly from one brightness value to the next, over the given delta_t. But the pattern engine in the Qualcomm LPG hardware only supports holding the brightness for each entry for the period. This subset of patterns can be represented in the leds-trigger-pattern by injecting zero-time transitions after each entry in the pattern, resulting in a pattern that pattern that can be rendered by the LPG. Rework LPG pattern interface to require these zero-time transitions, to make it comply with this subset of patterns and reject the patterns it can't render. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Documentation/leds/leds-qcom-lpg.rst | 8 ++++-- drivers/leds/rgb/leds-qcom-lpg.c | 43 ++++++++++++++++++++++++---- 2 files changed, 43 insertions(+), 8 deletions(-)