@@ -5,19 +5,248 @@
* Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
*/
-#include "sdm660.dtsi"
-
-/*
- * According to the downstream DTS,
- * 636 is basically a 660 except for
- * different CPU frequencies, Adreno
- * 509 instead of 512 and lack of
- * turing IP. These differences will
- * be addressed when the aforementioned
- * peripherals will be enabled upstream.
- */
+#include "sdm630.dtsi"
&adreno_gpu {
compatible = "qcom,adreno-509.0", "qcom,adreno";
- /* Adreno 509 shares the frequency table with 512 */
+ operating-points-v2 = <&gpu_sdm660_opp_table>;
+
+ gpu_sdm660_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /*
+ * 775MHz is only available on the highest speed bin
+ * Though it cannot be used for now due to interconnect
+ * framework not supporting multiple frequencies
+ * at the same opp-level
+
+ opp-750000000 {
+ opp-hz = /bits/ 64 <750000000>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0xCHECKME>;
+ };
+
+ * These OPPs are correct, but we are lacking support for the
+ * GPU regulator. Hence, disable them for now to prevent the
+ * platform from hanging on high graphics loads.
+
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ opp-peak-kBps = <5184000>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-647000000 {
+ opp-hz = /bits/ 64 <647000000>;
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ opp-peak-kBps = <4068000>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-588000000 {
+ opp-hz = /bits/ 64 <588000000>;
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-465000000 {
+ opp-hz = /bits/ 64 <465000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ opp-peak-kBps = <2724000>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-370000000 {
+ opp-hz = /bits/ 64 <370000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ opp-peak-kBps = <2188000>;
+ opp-supported-hw = <0xFF>;
+ };
+ */
+
+ opp-266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <1648000>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ opp-peak-kBps = <1200000>;
+ opp-supported-hw = <0xFF>;
+ };
+ };
+};
+
+&CPU0 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU1 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU2 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU3 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU4 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU5 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU6 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
+
+&CPU7 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
+
+&gcc {
+ compatible = "qcom,gcc-sdm660";
+};
+
+&gpucc {
+ compatible = "qcom,gpucc-sdm660";
+};
+
+&mdp {
+ ports {
+ port@1 {
+ reg = <1>;
+ mdp5_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+};
+
+&mdss {
+ dsi1: dsi@c996000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0c996000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ /* DSI1 shares the OPP table with DSI0 */
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+ <&mmcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>,
+ <&dsi1_phy 1>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE1_CLK>,
+ <&mmcc MDSS_BYTE1_INTF_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MISC_AHB_CLK>,
+ <&mmcc MDSS_PCLK1_CLK>,
+ <&mmcc MDSS_ESC1_CLK>;
+ clock-names = "mdp_core",
+ "byte",
+ "byte_intf",
+ "mnoc",
+ "iface",
+ "bus",
+ "core_mmss",
+ "pixel",
+ "core";
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&mdp5_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: dsi-phy@c996400 {
+ compatible = "qcom,dsi-phy-14nm-660";
+ reg = <0x0c996400 0x100>,
+ <0x0c996500 0x300>,
+ <0x0c996800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ status = "disabled";
+ };
+};
+
+&mmcc {
+ compatible = "qcom,mmcc-sdm660";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep_clk>,
+ <&gcc GCC_MMSS_GPLL0_CLK>,
+ <&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 0>,
+ <&dsi1_phy 1>,
+ <&dsi1_phy 0>,
+ <0>,
+ <0>;
+};
+
+&tlmm {
+ compatible = "qcom,sdm660-pinctrl";
+};
+
+&tsens {
+ #qcom,sensors = <14>;
};
@@ -7,248 +7,16 @@
* Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
*/
-#include "sdm630.dtsi"
+#include "sdm636.dtsi"
+
+/*
+ * According to the downstream DTS, 660 is basically a 660 except for different
+ * CPU frequencies, Adreno 512 instead of 509 and presens of turing IP. These
+ * differences will be addressed when the aforementioned peripherals will be
+ * enabled upstream.
+ */
&adreno_gpu {
compatible = "qcom,adreno-512.0", "qcom,adreno";
- operating-points-v2 = <&gpu_sdm660_opp_table>;
-
- gpu_sdm660_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- /*
- * 775MHz is only available on the highest speed bin
- * Though it cannot be used for now due to interconnect
- * framework not supporting multiple frequencies
- * at the same opp-level
-
- opp-750000000 {
- opp-hz = /bits/ 64 <750000000>;
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- opp-peak-kBps = <5412000>;
- opp-supported-hw = <0xCHECKME>;
- };
-
- * These OPPs are correct, but we are lacking support for the
- * GPU regulator. Hence, disable them for now to prevent the
- * platform from hanging on high graphics loads.
-
- opp-700000000 {
- opp-hz = /bits/ 64 <700000000>;
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- opp-peak-kBps = <5184000>;
- opp-supported-hw = <0xFF>;
- };
-
- opp-647000000 {
- opp-hz = /bits/ 64 <647000000>;
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- opp-peak-kBps = <4068000>;
- opp-supported-hw = <0xFF>;
- };
-
- opp-588000000 {
- opp-hz = /bits/ 64 <588000000>;
- opp-level = <RPM_SMD_LEVEL_NOM>;
- opp-peak-kBps = <3072000>;
- opp-supported-hw = <0xFF>;
- };
-
- opp-465000000 {
- opp-hz = /bits/ 64 <465000000>;
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- opp-peak-kBps = <2724000>;
- opp-supported-hw = <0xFF>;
- };
-
- opp-370000000 {
- opp-hz = /bits/ 64 <370000000>;
- opp-level = <RPM_SMD_LEVEL_SVS>;
- opp-peak-kBps = <2188000>;
- opp-supported-hw = <0xFF>;
- };
- */
-
- opp-266000000 {
- opp-hz = /bits/ 64 <266000000>;
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- opp-peak-kBps = <1648000>;
- opp-supported-hw = <0xFF>;
- };
-
- opp-160000000 {
- opp-hz = /bits/ 64 <160000000>;
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- opp-peak-kBps = <1200000>;
- opp-supported-hw = <0xFF>;
- };
- };
-};
-
-&CPU0 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <1024>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU1 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <1024>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU2 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <1024>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU3 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <1024>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU4 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <640>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU5 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <640>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU6 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <640>;
- /delete-property/ operating-points-v2;
-};
-
-&CPU7 {
- compatible = "qcom,kryo260";
- capacity-dmips-mhz = <640>;
- /delete-property/ operating-points-v2;
-};
-
-&gcc {
- compatible = "qcom,gcc-sdm660";
-};
-
-&gpucc {
- compatible = "qcom,gpucc-sdm660";
-};
-
-&mdp {
- ports {
- port@1 {
- reg = <1>;
- mdp5_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
- };
- };
- };
-};
-
-&mdss {
- dsi1: dsi@c996000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0x0c996000 0x400>;
- reg-names = "dsi_ctrl";
-
- /* DSI1 shares the OPP table with DSI0 */
- operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmpd SDM660_VDDCX>;
-
- interrupt-parent = <&mdss>;
- interrupts = <5>;
-
- assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
- <&mmcc PCLK1_CLK_SRC>;
- assigned-clock-parents = <&dsi1_phy 0>,
- <&dsi1_phy 1>;
-
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_BYTE1_CLK>,
- <&mmcc MDSS_BYTE1_INTF_CLK>,
- <&mmcc MNOC_AHB_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MISC_AHB_CLK>,
- <&mmcc MDSS_PCLK1_CLK>,
- <&mmcc MDSS_ESC1_CLK>;
- clock-names = "mdp_core",
- "byte",
- "byte_intf",
- "mnoc",
- "iface",
- "bus",
- "core_mmss",
- "pixel",
- "core";
-
- phys = <&dsi1_phy>;
- phy-names = "dsi";
-
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dsi1_in: endpoint {
- remote-endpoint = <&mdp5_intf2_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi1_out: endpoint {
- };
- };
- };
- };
-
- dsi1_phy: dsi-phy@c996400 {
- compatible = "qcom,dsi-phy-14nm-660";
- reg = <0x0c996400 0x100>,
- <0x0c996500 0x300>,
- <0x0c996800 0x188>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "iface", "ref";
- status = "disabled";
- };
-};
-
-&mmcc {
- compatible = "qcom,mmcc-sdm660";
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&sleep_clk>,
- <&gcc GCC_MMSS_GPLL0_CLK>,
- <&gcc GCC_MMSS_GPLL0_DIV_CLK>,
- <&dsi0_phy 1>,
- <&dsi0_phy 0>,
- <&dsi1_phy 1>,
- <&dsi1_phy 0>,
- <0>,
- <0>;
-};
-
-&tlmm {
- compatible = "qcom,sdm660-pinctrl";
-};
-
-&tsens {
- #qcom,sensors = <14>;
+ /* Adreno 512 shares the frequency table with 509 */
};
The sdm636 is a lighter version of sdm660. It lacks Turing DSP (cdsp) and has slightly different CPU speed and Adreno version. Reflect this by moving all common device nodes from sdm660.dtsi to sdm636.dtsi and including the later file from the former one. Currently this is implemented in the opposite direction, sdm636 includes sdm660, thus adding cdsp support would require adding delete-node statements to sdm636.dtsi. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sdm636.dtsi | 253 +++++++++++++++++++++++++-- arch/arm64/boot/dts/qcom/sdm660.dtsi | 250 +------------------------- 2 files changed, 250 insertions(+), 253 deletions(-)