| Message ID | 20220521203520.1513565-4-dmitry.baryshkov@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: enable CDSP and MSS on ifc6560 board | expand |
On 21.05.2022 22:35, Dmitry Baryshkov wrote: > Add device tree node describing modem device found on the SDM630/SDM660 > devices. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > arch/arm64/boot/dts/qcom/sdm630.dtsi | 59 ++++++++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi > index 55de345895e6..25b0067a93af 100644 > --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi > @@ -1006,6 +1006,65 @@ data { > }; > }; > > + mss_pil: remoteproc@4080000 { > + compatible = "qcom,sdm660-mss-pil"; > + reg = <0x04080000 0x408>, <0x04180000 0x48>; > + reg-names = "qdsp6", "rmb"; > + > + interrupts-extended = > + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack", > + "shutdown-ack"; > + > + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, > + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, > + <&gcc GCC_BOOT_ROM_AHB_CLK>, > + <&gcc GCC_MSS_GPLL0_DIV_CLK>, Looks like this should be GPLL0_OUT_MMSSCC instead[1][2], this clock is not defined upstream for some reason.. [1] https://github.com/sonyxperiadev/kernel/blob/aosp/LA.UM.7.1.r1/arch/arm64/boot/dts/qcom/sdm660.dtsi#L1980 [2] https://github.com/sonyxperiadev/kernel/blob/aosp/LA.UM.7.1.r1/drivers/clk/qcom/gcc-sdm660.c#L1756-L1770 Otherwise this looks good! Konrad
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 55de345895e6..25b0067a93af 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1006,6 +1006,65 @@ data { }; }; + mss_pil: remoteproc@4080000 { + compatible = "qcom,sdm660-mss-pil"; + reg = <0x04080000 0x408>, <0x04180000 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "xo", "qdss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + power-domains = <&rpmpd SDM660_VDDCX>, + <&rpmpd SDM660_VDDMX>; + power-domain-names = "cx", "mx"; + + status = "disabled"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + adreno_gpu: gpu@5000000 { compatible = "qcom,adreno-508.0", "qcom,adreno";
Add device tree node describing modem device found on the SDM630/SDM660 devices. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 59 ++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+)