diff mbox series

[v3,2/6] arm64: dts: qcom: pmi8998: add charger node

Message ID 20220513200512.501156-3-caleb.connolly@linaro.org
State Accepted
Commit 7711c35fd67c762d65fa802d06411e7bdbd3f748
Headers show
Series power: supply: introduce support for the Qualcomm smb2 charger | expand

Commit Message

Caleb Connolly May 13, 2022, 8:05 p.m. UTC 
Add a node for the smb2 charger hardware found on the pmi8998.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index da10668c361d..962a8719b07a 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,6 +9,23 @@  pmi8998_lsid0: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8998_charger: charger@1000 {
+			compatible = "qcom,pmi8998-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+			io-channels = <&pmi8998_rradc 3>,
+				      <&pmi8998_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
 		pmi8998_gpio: gpios@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;