@@ -51,7 +51,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
*/
struct stx104_iio {
unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
- unsigned int base;
+ void __iomem *base;
};
/**
@@ -64,7 +64,7 @@ struct stx104_iio {
struct stx104_gpio {
struct gpio_chip chip;
spinlock_t lock;
- unsigned int base;
+ void __iomem *base;
unsigned int out_state;
};
@@ -79,7 +79,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* get gain configuration */
- adc_config = inb(priv->base + 11);
+ adc_config = ioread8(priv->base + 11);
gain = adc_config & 0x3;
*val = 1 << gain;
@@ -91,24 +91,24 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
}
/* select ADC channel */
- outb(chan->channel | (chan->channel << 4), priv->base + 2);
+ iowrite8(chan->channel | (chan->channel << 4), priv->base + 2);
/* trigger ADC sample capture and wait for completion */
- outb(0, priv->base);
- while (inb(priv->base + 8) & BIT(7));
+ iowrite8(0, priv->base);
+ while (ioread8(priv->base + 8) & BIT(7));
- *val = inw(priv->base);
+ *val = ioread16(priv->base);
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* get ADC bipolar/unipolar configuration */
- adc_config = inb(priv->base + 11);
+ adc_config = ioread8(priv->base + 11);
adbu = !(adc_config & BIT(2));
*val = -32768 * adbu;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* get ADC bipolar/unipolar and gain configuration */
- adc_config = inb(priv->base + 11);
+ adc_config = ioread8(priv->base + 11);
adbu = !(adc_config & BIT(2));
gain = adc_config & 0x3;
@@ -130,16 +130,16 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
/* Only four gain states (x1, x2, x4, x8) */
switch (val) {
case 1:
- outb(0, priv->base + 11);
+ iowrite8(0, priv->base + 11);
break;
case 2:
- outb(1, priv->base + 11);
+ iowrite8(1, priv->base + 11);
break;
case 4:
- outb(2, priv->base + 11);
+ iowrite8(2, priv->base + 11);
break;
case 8:
- outb(3, priv->base + 11);
+ iowrite8(3, priv->base + 11);
break;
default:
return -EINVAL;
@@ -153,7 +153,7 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
priv->chan_out_states[chan->channel] = val;
- outw(val, priv->base + 4 + 2 * chan->channel);
+ iowrite16(val, priv->base + 4 + 2 * chan->channel);
return 0;
}
@@ -222,7 +222,7 @@ static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
if (offset >= 4)
return -EINVAL;
- return !!(inb(stx104gpio->base) & BIT(offset));
+ return !!(ioread8(stx104gpio->base) & BIT(offset));
}
static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
@@ -230,7 +230,7 @@ static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
- *bits = inb(stx104gpio->base);
+ *bits = ioread8(stx104gpio->base);
return 0;
}
@@ -252,7 +252,7 @@ static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
else
stx104gpio->out_state &= ~mask;
- outb(stx104gpio->out_state, stx104gpio->base);
+ iowrite8(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
@@ -279,7 +279,7 @@ static void stx104_gpio_set_multiple(struct gpio_chip *chip,
stx104gpio->out_state &= ~*mask;
stx104gpio->out_state |= *mask & *bits;
- outb(stx104gpio->out_state, stx104gpio->base);
+ iowrite8(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
@@ -306,11 +306,16 @@ static int stx104_probe(struct device *dev, unsigned int id)
return -EBUSY;
}
+ priv = iio_priv(indio_dev);
+ priv->base = devm_ioport_map(dev, base[id], STX104_EXTENT);
+ if (!priv->base)
+ return -ENOMEM;
+
indio_dev->info = &stx104_info;
indio_dev->modes = INDIO_DIRECT_MODE;
/* determine if differential inputs */
- if (inb(base[id] + 8) & BIT(5)) {
+ if (ioread8(priv->base + 8) & BIT(5)) {
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
indio_dev->channels = stx104_channels_diff;
} else {
@@ -320,18 +325,15 @@ static int stx104_probe(struct device *dev, unsigned int id)
indio_dev->name = dev_name(dev);
- priv = iio_priv(indio_dev);
- priv->base = base[id];
-
/* configure device for software trigger operation */
- outb(0, base[id] + 9);
+ iowrite8(0, priv->base + 9);
/* initialize gain setting to x1 */
- outb(0, base[id] + 11);
+ iowrite8(0, priv->base + 11);
/* initialize DAC output to 0V */
- outw(0, base[id] + 4);
- outw(0, base[id] + 6);
+ iowrite16(0, priv->base + 4);
+ iowrite16(0, priv->base + 6);
stx104gpio->chip.label = dev_name(dev);
stx104gpio->chip.parent = dev;
@@ -346,7 +348,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
stx104gpio->chip.set = stx104_gpio_set;
stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
- stx104gpio->base = base[id] + 3;
+ stx104gpio->base = priv->base + 3;
stx104gpio->out_state = 0x0;
spin_lock_init(&stx104gpio->lock);
This driver doesn't need to access I/O ports directly via inb()/outb() and friends. This patch abstracts such access by calling ioport_map() to enable the use of more typical ioread8()/iowrite8() I/O memory accessor calls. Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> --- drivers/iio/adc/stx104.c | 56 +++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 27 deletions(-)