diff mbox series

[04/11] dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'

Message ID 20220507194913.261121-5-krzysztof.kozlowski@linaro.org
State Accepted
Commit 58819949b8ec7322d0f67d14e5cb993ce8cd989b
Headers show
Series dt-bindings/pinctrl/arm: qcom: minor cleanups of QCOM PMIC pinctrl | expand

Commit Message

Krzysztof Kozlowski May 7, 2022, 7:49 p.m. UTC
'input-disable' is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:

  arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: gpio@c000: lt9611-rst-state: 'oneOf' conditional failed, one must be fixed:
    'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
    'function', 'input-disable', 'output-high', 'pins', 'power-source' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Rob Herring (Arm) May 17, 2022, 12:30 a.m. UTC | #1
On Sat, 07 May 2022 21:49:06 +0200, Krzysztof Kozlowski wrote:
> 'input-disable' is already used and supported by common pinctrl
> bindings, so add it also here to fix warnings like:
> 
>   arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: gpio@c000: lt9611-rst-state: 'oneOf' conditional failed, one must be fixed:
>     'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
>     'function', 'input-disable', 'output-high', 'pins', 'power-source' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 33eb52660291..7e74a87ccc39 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -401,6 +401,7 @@  $defs:
 
       bias-high-impedance: true
       input-enable: true
+      input-disable: true
       output-high: true
       output-low: true
       output-enable: true